DOWNLOAD Sharp AR-M550 (serv.man15) Service Manual ↓ Size: 905.4 KB | Pages: 98 in PDF or view online for FREE

Model
AR-M550 (serv.man15)
Pages
98
Size
905.4 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / (8) Simulation
File
ar-m550-sm15.pdf
Date

Sharp AR-M550 (serv.man15) Service Manual ▷ View online

AR-M550/M620  SIMULATION  8 - 16
53
6
Used to adjust the DSPF width 
detection level.
Adjustment
Operation
7
Used to enter the SPF width 
detection adjustment value.
Adjustment/Setup/
Operation data output/
Check (Display/Print)
DSPF
Operation
8
Used to adjust the document scan 
start position. (Used to adjust the 
scanner scan position in the SPF 
mode front scan.)
Adjustment
55
1
Used to set the specifications of the 
engine control operations. (PCU 
PWB)
Setting
Operation
Specifications
2
Used to set the specifications of the 
scanner control operations. 
(Scanner control PWB)
Setting
Operation
Specifications
3
Used to set the specifications of the 
controller operations. (MFP control 
PWB)
Setting
Operation
Specifications
56
1
Used to transfer the MFP controller 
data. (Used to repair the PWB.)
Data transfer
MFP controller
Data transfer
60
1
Used to check the MFP control 
(DRAM) operations (read/write).
Operation test/Check
ICU
Operation
61
1
Used to check the operation of the 
scanner (write) unit (LSU).
Operation test/Check
Scanner (write) 
unit (LSU)
Operation
2
Used to adjust the laser power 
(absolute value) in the copy mode. 
Adjustment
Scanner (write) 
unit (LSU)
Operation
3
Used to adjust the laser power 
(absolute value) in the FAX mode.
Adjustment
Scanner (write) 
unit (LSU)
Operation
4
Used to adjust the laser power 
(absolute value) in the printer mode. 
Adjustment
Scanner (write) 
unit (LSU)
Operation
62
1
Used to format the hard disk.
Data clear
MFP controller 
(HDD)
Clear
2
Used to check the operation of the 
hard disk (read/write). (Only in the 
model with a disk installed) (Partial 
check)
Operation test/Check
MFP controller 
(HDD)
Operation
3
Used to check the operation of the 
hard disk (read/write). (All areas 
check)
Operation test/Check
MFP controller 
(HDD)
Operation
6
Used to check the operations of the 
hard disk. (The self diag operation of 
the SMART function is executed.)
Operation test/Check
MFP controller 
(HDD)
Clear
7
Used to check the operations of the 
hard disk. (The result of the self diag 
operation of the SMART function is 
printed out.)
Operation test/Check
MFP controller 
(HDD)
Clear
8
Used to format the hard disk (the 
system area excluded).
Data clear
MFP controller 
(HDD) 
Clear
10
Used to delete a job complete list 
(also to delete job log data)
Data clear
MFP controller 
(HDD) 
Clear
11
Used to delete document filing data. 
(The management area (standard 
folder, user folder) is cleared.)
Data clear
MFP controller 
(HDD) 
Clear
63
1
Used to check the result of shading 
correction. (The shading correction 
data are displayed.)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
Optical (Image 
scanning)
Operation
2
Used to execute shading.
Adjustment
Optical (Image 
scanning)
Operation
7
Used to adjust the white plate scan 
start position for shading. (Document 
table mode)
Adjustment
Laser (Exposure)
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620  SIMULATION  8 - 17
64
1
Used to check the operation of the 
printer section (self-print operation), 
(The print pattern, the paper feed 
mode, the print mode, the print 
quantity, and the density can be 
optionally set.)
Operation test/Check
Operation
65
1
Used to adjust the touch panel (LCD 
display section) detection position.
Adjustment
Operation 
(Display/Operation 
key)
2
Used to check the result of the touch 
panel (LCD display) detection 
position adjustment. (The 
coordinates are displayed.)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
Operation 
(Display/Operation 
key)
66
1
Used to change and check the FAX 
soft switch functions. (Used to 
change and check the functions 
provided for the FAX soft switches.)
Setting
FAX
2
Used to clear the FAX soft switch 
function data and to set to the 
default. (Excluding the adjustment 
values.)
Data clear
FAX
Data
3
Used to  check the  operation of the 
FAX PWB memory (read/write). 
(This adjustment is required when 
the PWB is replaced with a new 
one.)
Operation test/Check
FAX
Data
4
Used to check the output operation 
of data signals in each data output 
mode of FAX. (Used to check the 
operation of MODEM. ) Send level: 
Max. (Only when FAX is installed)
Operation test/Check
FAX
Operation
5
Used to check the output operation 
of data signals in each data output 
mode of FAX. (Used to check the 
operation of MODEM.) An output is 
sent at the send level set by the soft 
switch. (Only when FAX is installed)
Operation test/Check
FAX
Operation
6
Used to print the confidential pass 
code. (Used when the confidential 
pass code is forgotten.) (Only when 
FAX is installed)
User data output/
Check (Display/Print)
FAX
Data
7
Used to print the image memory data 
(memory send/receive). (Only when 
FAX is installed)
User data output/
Check (Display/Print)
FAX
Data
8
Used to check the output operation 
of various sound signals of FAX. 
(Used to check the operation of the 
sound output IC.) Send level: Max. 
(Only when FAX is installed)
Operation test/Check
FAX
Operation
9
Used to check the output operation 
of various sound signals of FAX. 
(Used to check the operation of the 
sound output IC.) An output is sent 
at the send level set by the soft 
switch. (Only when FAX is installed)
Operation test/Check
FAX
Operation
10
Used to clear all data of the image 
memory (memory send/receive). 
The confidential data are also 
cleared at the same time. (Only 
when FAX is installed)
User data output/
Check (Display/Print)
FAX
Data
11
Used to check the output operation 
of FAX G3 mode 300bps. (Used to 
check the operation of MODEM.) 
Send level: Max. (Only when FAX is 
installed)
Operation test/Check
FAX
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620  SIMULATION  8 - 18
66
12
Used to check the output operation 
of FAX G3 mode 300bps. (Used to 
check the operation of MODEM.) An 
output is send at the send level set 
by the soft switch. (Only when FAX 
is installed)
Operation test/Check
FAX
Operation
13
Used to enter (set) the number of 
FAX dial signal output test. (The dial 
number set by this simulation is 
outputted when the dial signal output 
test is made by SIM 66-14 - 16. ) 
(Only when FAX is installed)
Setting
Data
14
Used to set the make time in the 
FAX pulse dial mode (10pps) and to 
test the dial signal output. (The dial 
number signal set by SIM 66-13 is 
outputted.) Used to check troubles in 
dialing and to check the operation. 
(Only when FAX is installed)
Setting/Operation test/
Check
FAX
Operation
15
Used to set the make time in the 
FAX pulse dial mode (20pps) and to 
test the dial signal output. (The dial 
number signal set by SIM 66-13 is 
outputted.) Used to check troubles in 
dialing and to check the operation. 
(Only when FAX is installed)
Setting/Operation test/
Check
FAX
Operation
16
Used to check the dial signal (DTMF) 
output in the FAX tone dial mode. 
(The dial number signal set by SIM 
66-13 is outputted.) The send level 
can be set to an optional level. Used 
to check troubles in dialing and to 
check the operation. (Only when 
FAX is installed)
Setting/Operation test/
Check
FAX
Operation
17
Used to check the dial signal (DTMF) 
output in the FAX tone dial mode.  
Send level: Max. Used to check the 
operation. (Only when FAX is 
installed)
Setting
FAX
Operation
18
Used to check the dial signal (DTMF) 
output in the FAX tone dial mode.  
An output is sent at the send level 
set by the soft switch. Used to check 
the operation. (Only when FAX is 
installed)
Setting
FAX
Operation
19
Used to back-up the HDD data into 
the Flash memory (optional FAX 
expansion memory: AR-MM9). (Only 
when FAX is installed)
Data transfer
FAX
Data
20
Used to read the back-up data by 
SIM 66-19 to the SRAM. (Only when 
FAX is installed)
Data transfer
FAX
Data
21
Used to print information related to 
FAX (various registrations, 
communication management, file 
management, system error 
protocol). (Only when FAX is 
installed)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
FAX
Data
22
Used to adjust the handset volume. 
(Only when the FAX is installed.)
Setting
FAX
Operation
23
Used to download the FAX program. 
(Only when FAX is installed)
Not used in the market. (For 
development)
Setting
FAX
24
Used to clear the FAST memory 
data. (Only when FAX is installed)
Clear
FAX
Data
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620  SIMULATION  8 - 19
66
25
Used to register the FAX number for 
Modem dial-in. (Only when FAX is 
installed)
Not used in the market. (For 
development)
Setting
FAX
Data
26
Used to register external telephone 
numbers for Modem dial-in. (Only 
when FAX is installed)
Not used in the market. (For 
development)
Setting
FAX
Data
27
Used to register the transfer number 
for voice warp. (Only when FAX is 
installed)
Not used in the market. (For 
development)
Setting
FAX
Data
28
Used to record voice messages. 
(Only when FAX is installed.)
Setting
FAX
Data
29
Used to clear data related to an 
address book (one-touch 
registration, program registration/
expansion, relay memory box 
registration, each table content).
Clear
FAX
Data
30
Used to check the change in the 
TEL/LIU status.
Operation test/Check
FAX
Operation
31
Used to check the relay operation.
Operation test/Check
FAX
Operation
32
Used to check the receive data (fixed 
data) from the line.
Operation test/Check
FAX
Operation
33
Used to check the signal (BUSY 
TONE/CNG/CED/FNET/DTMF) 
detection.
Operation test/Check
FAX
Operation
34
Used to measure the communication 
time of test image data. 
Operation test/Check
FAX
Operation
35
Modem program reloading (Only 
when FAX is installed)
Not used in the market. (For 
development)
Setting
FAX
Data
36
Used to check interface between 
MFPC controller and MDMC. (Check 
of the data line or the command line)
Operation test/Check
FAX
Operation
39
Used to set the destination 
specifications.
Setting
FAX
Specifications
Operation
60
Used to set the ACR data.
Setting
FAX
Operation
67
2
Used to check the operation of the 
parallel I/F of the printer. (This 
simulation is for production only, and 
requires a special tool for execution. 
Not used in the market.)
Operation test/Check
MFP controller
Operation
Interface/
Communicatio
n
11
Used to set YES/NO of the parallel I/
F select signal of the printer.
Setting
MFP controller
Operation
Interface/
Communicatio
n
16
Used to check the operation of the 
network card.
Operation test/Check
MFP controller
Operation
Interface/
Communicatio
n
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Page of 98
Display

Click on the first or last page to see other AR-M550 (serv.man15) service manuals if exist.