Sharp AR-M351U / AR-M451U (serv.man46) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
No.
Subject
Description
28
Printer
If data on the HDD is deleted using document filing when receiving printing data,
the U2-11 error occurs, depending on the timing.
the U2-11 error occurs, depending on the timing.
29
Printer
The second send may fail and the PS error occurs when sending specific PS jobs
twice.
twice.
30
Printer
The “PS error” occurred when the reset code was inserted to a character string. In
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
31
Printer
The PS error occurs when printing specific data using the PS driver with Oracle or
InDesign.
InDesign.
32
Specification
change
change
The specification has been changed so that the HTTP server and port number are
enabled at the NIC reset even if the HTTP server is disabled.
enabled at the NIC reset even if the HTTP server is disabled.
33
Specification
change
change
The specification has been changed so that the network parameter settings are
changed with software SW:
[Setting procedure]
changed with software SW:
[Setting procedure]
(SIM 55-3
SOFT SW 9)
bit5
bit6
10Mbps/100Mbps setting
bit7
bit8
Full duplex/Half duplex
setting
0
0
automatic
recognition
(Default)
0
0
automatic
recognition
(Default)
0
1
10M bps
0
1
Half duplex
1
0
100M bps
1
0
Full duplex
1
1
automatic recognition
1
1
automatic recognition
34
Specification
change
change
The specification has been changed so that prohibition of blank paper printing with
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
35
Specification
change
change
The specification has been changed so that it complies with the daylight saving
time (USA), which is effective from the year 2007.
time (USA), which is effective from the year 2007.
Sharp Electronics (UK) Ltd., Technical Services Group
No.
Subject
Description
28
Printer
If data on the HDD is deleted using document filing when receiving printing data,
the U2-11 error occurs, depending on the timing.
the U2-11 error occurs, depending on the timing.
29
Printer
The second send may fail and the PS error occurs when sending specific PS jobs
twice.
twice.
30
Printer
The “PS error” occurred when the reset code was inserted to a character string. In
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
31
Printer
The PS error occurs when printing specific data using the PS driver with Oracle or
InDesign.
InDesign.
32
Specification
change
change
The specification has been changed so that the HTTP server and port number are
enabled at the NIC reset even if the HTTP server is disabled.
enabled at the NIC reset even if the HTTP server is disabled.
33
Specification
change
change
The specification has been changed so that the network parameter settings are
changed with software SW:
[Setting procedure]
changed with software SW:
[Setting procedure]
(SIM 55-3
SOFT SW 9)
bit5
bit6
10Mbps/100Mbps setting
bit7
bit8
Full duplex/Half duplex
setting
0
0
automatic
recognition
(Default)
0
0
automatic
recognition
(Default)
0
1
10M bps
0
1
Half duplex
1
0
100M bps
1
0
Full duplex
1
1
automatic recognition
1
1
automatic recognition
34
Specification
change
change
The specification has been changed so that prohibition of blank paper printing with
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
35
Specification
change
change
The specification has been changed so that it complies with the daylight saving
time (USA), which is effective from the year 2007.
time (USA), which is effective from the year 2007.
Sharp Electronics (UK) Ltd., Technical Services Group
No.
Subject
Description
28
Printer
If data on the HDD is deleted using document filing when receiving printing data,
the U2-11 error occurs, depending on the timing.
the U2-11 error occurs, depending on the timing.
29
Printer
The second send may fail and the PS error occurs when sending specific PS jobs
twice.
twice.
30
Printer
The “PS error” occurred when the reset code was inserted to a character string. In
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
31
Printer
The PS error occurs when printing specific data using the PS driver with Oracle or
InDesign.
InDesign.
32
Specification
change
change
The specification has been changed so that the HTTP server and port number are
enabled at the NIC reset even if the HTTP server is disabled.
enabled at the NIC reset even if the HTTP server is disabled.
33
Specification
change
change
The specification has been changed so that the network parameter settings are
changed with software SW:
[Setting procedure]
changed with software SW:
[Setting procedure]
(SIM 55-3
SOFT SW 9)
bit5
bit6
10Mbps/100Mbps setting
bit7
bit8
Full duplex/Half duplex
setting
0
0
automatic
recognition
(Default)
0
0
automatic
recognition
(Default)
0
1
10M bps
0
1
Half duplex
1
0
100M bps
1
0
Full duplex
1
1
automatic recognition
1
1
automatic recognition
34
Specification
change
change
The specification has been changed so that prohibition of blank paper printing with
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
35
Specification
change
change
The specification has been changed so that it complies with the daylight saving
time (USA), which is effective from the year 2007.
time (USA), which is effective from the year 2007.
Sharp Electronics (UK) Ltd., Technical Services Group
No.
Subject
Description
28
Printer
If data on the HDD is deleted using document filing when receiving printing data,
the U2-11 error occurs, depending on the timing.
the U2-11 error occurs, depending on the timing.
29
Printer
The second send may fail and the PS error occurs when sending specific PS jobs
twice.
twice.
30
Printer
The “PS error” occurred when the reset code was inserted to a character string. In
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
order to correct this error, the setting has been changed so that the reset code in a
text is recognized as a character string.
31
Printer
The PS error occurs when printing specific data using the PS driver with Oracle or
InDesign.
InDesign.
32
Specification
change
change
The specification has been changed so that the HTTP server and port number are
enabled at the NIC reset even if the HTTP server is disabled.
enabled at the NIC reset even if the HTTP server is disabled.
33
Specification
change
change
The specification has been changed so that the network parameter settings are
changed with software SW:
[Setting procedure]
changed with software SW:
[Setting procedure]
(SIM 55-3
SOFT SW 9)
bit5
bit6
10Mbps/100Mbps setting
bit7
bit8
Full duplex/Half duplex
setting
0
0
automatic
recognition
(Default)
0
0
automatic
recognition
(Default)
0
1
10M bps
0
1
Half duplex
1
0
100M bps
1
0
Full duplex
1
1
automatic recognition
1
1
automatic recognition
34
Specification
change
change
The specification has been changed so that prohibition of blank paper printing with
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
the PL command “@PJL DEFAULT BLANKSKIP=ON” is enabled.
35
Specification
change
change
The specification has been changed so that it complies with the daylight saving
time (USA), which is effective from the year 2007.
time (USA), which is effective from the year 2007.
Display