DOWNLOAD Sharp AR-M351U / AR-M451U (serv.man17) Service Manual ↓ Size: 887.33 KB | Pages: 88 in PDF or view online for FREE

Model
AR-M351U AR-M451U (serv.man17)
Pages
88
Size
887.33 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Simulations
File
ar-m351u-ar-m451u-sm17.pdf
Date
PREV: Sharp AR-M351U / AR-M451U (serv.man16) Service Manual

Sharp AR-M351U / AR-M451U (serv.man17) Service Manual ▷ View online

AR-M351U/M451U, AR-M355U/M455U  SIMULATION  9 - 36
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
Operation/Procedure
1) Select the number corresponding to the copy density adjust-
ment level with 10-key. (Select one of 3 - 11.) 
2) Press [START] key. 
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key. 
The adjustment value is set. 
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following proce-
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
Select 2, and press [START] key.
Press [START] key, 
or press [CUSTOM SETTINGS] key.
SIMULATION 46-2
Select other then 0 - 2, and 
press [START] key.
Press [CUSTOM SETTINGS] key. 
SIMULATION 46-2
EXP. LEVEL SETUP (2). INPUT VALUE 0-99, AND PRESS START.
3. AE 3.0
Press [START] key.
SIMULATION 46-2
EXP. LEVEL SETUP (2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-2
EXP. LEVEL SETUP (2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT
Press [START] key, or 
press [CUSTOM SETTINGS] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press 
[START] key. 
EXP. LEVEL SETUP (2). SELECT 0-6, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. AE 3.0 
50
  4. CH 3.0 
50
5. MIX 3.0 
50
  6. PHOTO 3.0 
50
SIMULATION 46-2
EXP. LEVEL SETUP (2). SELECT 3-6, AND PRESS START.
(EXP. LEVEL SELECT)
  3. AE 3.0    4. CH 3.0
  5. MIX 3.0   6. PHOTO 3.0
1
46-9
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density for each density
level (display value) in the copy mode (binary -
Text mode). An optional print density can be set
for each density level (display value).
Item
Picture quality
Density
Item
Set 
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10 4.5
Exposure level 4.5
11 5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
AR-M351U/M451U, AR-M355U/M455U  SIMULATION  9 - 37
Operation/Procedure
1) Select the number corresponding to the copy density adjust-
ment level with 10-key. (Select one of 3 - 11.)
2) Press [START] key.
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following proce-
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
SIMULATION 46-9
Select other than 0 - 2, and 
press [START] key.
Press 
[CUSTOM SETTINGS] key. 
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key. 
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT
Press [START] key, or 
press [CUSTOM SETTINGS] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press 
[START] key. 
EXP. LEVEL SETUP (CHAR.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. 1.0 
50
  4. 1.5 
50
  5. 2.0 
50
6. 2.5 
50
  7. 3.0 
50
  8. 3.5 
50
9. 4.0 
50
  10. 4.5 
50
 11. 5.0 
50
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0     4. 1.5     5. 2.0
6. 2.5     7. 3.0     8. 3.5
9. 4.0     10. 4.5    11. 5.0
1
46-10
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density for each density 
level (display value) in the copy mode (binary - 
Text/Photo mode). An optional print density can 
be set for each density level (display value).
Item
Picture quality
Item
Set 
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10 4.5
Exposure level 4.5
11 5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
AR-M351U/M451U, AR-M355U/M455U  SIMULATION  9 - 38
Operation/Procedure
1) Select the number corresponding to the copy density adjust-
ment level with 10-key. (Select one of 3 - 11.) 
2) Press [START] key. 
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following proce-
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
SIMULATION 46-10
Select other than 0 - 2, and 
press [START] key. 
Press [CUSTOM SETTINGS] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key. 
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT
Press [START] key, or 
press [CUSTOM SETTING] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press 
[START] key. 
EXP. LEVEL SETUP (MIX.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. 1.0 
50
  4. 1.5 
50
  5. 2.0 
50
6. 2.5 
50
  7. 3.0 
50
  8. 3.5 
50
9. 4.0 
50
  10. 4.5 
50
 11. 5.0 
50
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0     4. 1.5     5. 2.0
6. 2.5     7. 3.0     8. 3.5
9. 4.0     10. 4.5    11. 5.0
1
46-11
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density for each density 
level (display value) in the copy mode (binary - 
Photo mode). An optional print density can be set 
for each density level (display value).
Item
Picture quality
Density
Item
Set 
range
Default
0
TRAY SELECT Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10 4.5
Exposure level 4.5
11 5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
AR-M351U/M451U, AR-M355U/M455U  SIMULATION  9 - 39
Operation/Procedure
1) Select the adjustment item of FAX EXP. LEVEL with 10-key.
2) Press [START] key. 
3) Enter the print density level with 10-key.
4) Press [P] key or [START] key. 
The adjustment value is set. 
When [START] key is pressed, printing is perfumed and the
adjustment value is set simultaneously.
Check the density of printed image.
NOTE: When the FAX print image density is adjusted with this
simulation, the print image densities of all the FAX modes
are changed to the image density level set with this simula-
tion.
That is, the print image density of each FAX mode set with
SIM 46-13, 14, 15 is changed to the print image density
level adjusted with this simulation.
To select paper (paper feed tray), perform the following proce-
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
46-12
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density in the FAX mode 
(all modes). 
Item
Picture quality
Item
Set 
range
Default
0 TRAY SELECT
Paper feed tray selection
1 COPY START
Copy START (Default)
2 FAX EXP. LEVEL FAX mode print density
0 - 99
50
SIMULATION 46-11
Select other than 0 - 2, and 
press [START] key. 
Press [CUSTOM SETTINGS] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key. 
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT
Press [START] key, 
or press [CUSTOM SETTING] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press
[START] key. 
EXP. LEVEL SETUP (PHOTO2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. 1.0 
50
  4. 1.5 
50
  5. 2.0 
50
6. 2.5 
50
  7. 3.0 
50
  8. 3.5 
50
9. 4.0 
50
  10. 4.5 
50
 11. 5.0 
50
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0     4. 1.5     5. 2.0
6. 2.5     7. 3.0     8. 3.5
9. 4.0     10. 4.5    11. 5.0
1
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
Select 0, and 
press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). SELECT 0-2, AND PRESS 
START.
0.TRAY SELECT 
1
 1.COPY START
2.FAX EXP.LEVEL 
50
Press [CUSTOM SETTINGS] key. 
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET), INPUT VALUE 0-99, AND
PRESS START.
2.FAX EXP.LEVEL
50
1
Press [START] key.
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). NOW PRINTING.
Select 1, and 
press [START] key.
Select other than 0 - 1, and 
press [START] key. 
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET).SELECT 1-5, AND PRESS
START.
(FEED TRAY)
 1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
 5.BPT
Page of 88
Display

Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.

RANDOM: