Sharp AR-M351N / AR-M451N (serv.man7) User Manual / Operation Manual ▷ View online
REQUIREMENTS FOR MACINTOSH
9
Q Mac OS 8.6 - 9.2.2
1
Select [Chooser] from the Apple
Menu.
Menu.
2
Click the [LaserWriter 8] icon.
O
The model name of your network-connected
machine ("SCxxxxxx") appears in the "Select a
PostScript Printer" list on the right.
The name of the machine that appears is the
name that was entered in the AppleTalk
settings when the network settings were
configured ("xxxxxx" is a sequence of
characters that varies depending on your
machine).
machine ("SCxxxxxx") appears in the "Select a
PostScript Printer" list on the right.
The name of the machine that appears is the
name that was entered in the AppleTalk
settings when the network settings were
configured ("xxxxxx" is a sequence of
characters that varies depending on your
machine).
O
If multiple AppleTalk zones are displayed,
select the zone which includes the printer.
select the zone which includes the printer.
3
Click the machine's model name
("SCxxxxxx") in the "Select a
PostScript Printer" list.
("SCxxxxxx") in the "Select a
PostScript Printer" list.
4
Click the [Create] button.
O
If the "Select a PostScript™ Printer Description
File" dialog box appears, select the PPD file of
the machine, and then click the [Select] button.
File" dialog box appears, select the PPD file of
the machine, and then click the [Select] button.
O
If the "Select a PostScript™ Printer Description
File" dialog box does not appear, follow these
steps to select the PPD file manually when you
return to the Chooser dialog box.
1) Verify that the machine is selected in the
File" dialog box does not appear, follow these
steps to select the PPD file manually when you
return to the Chooser dialog box.
1) Verify that the machine is selected in the
"Select a PostScript Printer" list, and then
click the [Setup] button and the [Select PPD]
button.
click the [Setup] button and the [Select PPD]
button.
2) Select the PPD file of the machine, and then
click the [Open] (or [Select]) button.
3) Click the [OK] button.
5
Verify that the machine is selected
in the "Select a PostScript Printer"
list, and then click the [Setup]
button and the [Configure] button.
in the "Select a PostScript Printer"
list, and then click the [Setup]
button and the [Configure] button.
6
Set the printer configuration based
on the options that have been
installed, and then click the [OK]
button.
on the options that have been
installed, and then click the [OK]
button.
7
Click the [OK] button to close the
dialog box.
dialog box.
8
Click the Close box to close the
Chooser.
Chooser.
This completes the configuration of the printer
driver.
driver.
REQUIREMENTS FOR MACINTOSH
10
Configuring the print settings
The contents of the windows that appear when configuring the paper settings and print condition settings vary by
country and region.
country and region.
Q Paper settings
Before printing, configure the paper settings in the
printer driver.
The File menu of the software application is used to
open the settings. The settings and selections vary
depending on the OS version and software
application.
printer driver.
The File menu of the software application is used to
open the settings. The settings and selections vary
depending on the OS version and software
application.
1
Select [Page Setup] from the [File]
menu of the application.
menu of the application.
The following window will appear. (The window
varies depending on the operating system
version, printer driver version, and software
application.)
varies depending on the operating system
version, printer driver version, and software
application.)
2
Adjust each setting.
Paper size, reduction/enlargement, and
orientation can be configured.
orientation can be configured.
3
Click the [OK] button.
Q Print condition settings
1
Select [Print] from the [File] menu
of the application.
of the application.
The following window will appear. (The window
varies depending on the operating system
version, printer driver version, and software
application.)
varies depending on the operating system
version, printer driver version, and software
application.)
2
Adjust the settings.
Click next to [Copies &
Pages] ([General] in Mac OS
8.6 to 9.2.2) and select the
settings that you wish to
configure from the pull-down
menu. The corresponding
setting screen will appear.
Pages] ([General] in Mac OS
8.6 to 9.2.2) and select the
settings that you wish to
configure from the pull-down
menu. The corresponding
setting screen will appear.
3
Click the [Print] button.
NOTES
O
The items that appear in this menu will vary
depending on the operating system version and
software application.
depending on the operating system version and
software application.
O
To print when auditing mode is enabled, enter
your 5-digit account number in [Account Number]
in the [Job Handling] menu.
When auditing mode is enabled, a print job may
not be printed if an account number is not entered
or an incorrect account number is entered. This
depends on the key operator program settings.
See "Cancel jobs of invalid accounts" in the "Key
operator's guide".
your 5-digit account number in [Account Number]
in the [Job Handling] menu.
When auditing mode is enabled, a print job may
not be printed if an account number is not entered
or an incorrect account number is entered. This
depends on the key operator program settings.
See "Cancel jobs of invalid accounts" in the "Key
operator's guide".
REQUIREMENTS FOR MACINTOSH
11
Uninstalling the PPD file
Q Mac OS 8.6 - 9.2.2
1
Insert the PS3 Expansion Kit AR-
PK6 Software CD-ROM into your
computer's CD-ROM drive.
PK6 Software CD-ROM into your
computer's CD-ROM drive.
2
Double-click the CD-ROM icon on
the desktop and double-click the
[MacOS] folder.
the desktop and double-click the
[MacOS] folder.
3
Double-click the [Installer] icon.
4
Select [Remove] from the Install
menu and then click the [Remove]
button.
menu and then click the [Remove]
button.
NOTE
There is no remove tool for Mac OS X. The PPD file
for Mac OS X has been copied to the following folder
in the startup disk. To delete the PPD file, move it to
the Trash.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj] folder
Delete the SHARP PPD file from this folder.
There is no remove tool for Mac OS X. The PPD file
for Mac OS X has been copied to the following folder
in the startup disk. To delete the PPD file, move it to
the Trash.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj] folder
Delete the SHARP PPD file from this folder.
12
SECTIONS OF THE OPERATION MANUALS THAT
ARE RELATED TO THE PS3 EXPANSION KIT
ARE RELATED TO THE PS3 EXPANSION KIT
The sections of each operation manual that are related to the PS3 Expansion kit (AR-PK6) are explained below. The
"OPERATION MANUAL (for printer)" is on the "Software CD-ROM (1)" in PDF format.
"OPERATION MANUAL (for printer)" is on the "Software CD-ROM (1)" in PDF format.
Q Sections of the "OPERATION MANUAL (for general information and copier
operation)" that are related to the PS3 Expansion kit:
The following custom settings are related to the kit:
O
O
PS Font list
Page 2-14, "PS Font list " in "Printer test page" in "List print"
Page 2-14, "PS Font list " in "Printer test page" in "List print"
O
Extended font list
Page 2-14, "PS Extended font list" in "Printer test page" in "List print"
Page 2-14, "PS Extended font list" in "Printer test page" in "List print"
Q Sections of the "OPERATION MANUAL (for printer)" that are related to the PS3
Expansion kit:
The following printer configuration settings are related to the kit:
O
O
PostScript Settings
Page 4-5, "PostScript settings" in "MAKING CONFIGURATION SETTING".
When "PostScript settings" is touched, "Print PS Errors" appears. The factory default setting is disabled (no
checkmark). When the checkbox is selected and a PostScript error occurs, the error will be printed.
Page 4-5, "PostScript settings" in "MAKING CONFIGURATION SETTING".
When "PostScript settings" is touched, "Print PS Errors" appears. The factory default setting is disabled (no
checkmark). When the checkbox is selected and a PostScript error occurs, the error will be printed.
The following items in CHAPTER 5, KEY OPERATOR PROGRAMS are related to the kit:
Pages 5-2, 5-4, 5-7; the following item in "Network settings":
O
Pages 5-2, 5-4, 5-7; the following item in "Network settings":
O
"Enable EtherTalk". The factory default setting for this program is enabled (a checkmark appears). This is
required for use in a Macintosh environment.
required for use in a Macintosh environment.
The following items in "Interface settings" on pages 5-2, 5-4, and 5-5 are related to the kit:
O
O
"PostScript" in the emulated printer language settings in "Parallel port emulation switching" in "Interface
settings".
settings".
O
"PostScript" in the emulated printer language settings in "USB port emulation switching" in "Interface settings".
O
"PostScript" in the emulated printer language settings in "Network port emulation switching" in "Interface
settings".
settings".
Q Sections of the KEY OPERATOR'S GUIDE that are related to the PS3 Expansion
kit:
The following program is related:
O
O
PS3 Expansion Kit
Pages 3, 6, and 13; "PS3 expansion kit " in "Product key".
To use the machine as a PostScript compatible printer, the product key (password) must be entered (this is
only required once) using the "PS3 Expansion kit" program. The product key is provided by your dealer.
Pages 3, 6, and 13; "PS3 expansion kit " in "Product key".
To use the machine as a PostScript compatible printer, the product key (password) must be entered (this is
only required once) using the "PS3 Expansion kit" program. The product key is provided by your dealer.
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man7) service manuals if exist.