Sharp AR-M35 / AR-M450 (serv.man9) Service Manual ▷ View online
AR-M350U CONSUMABLE PARTS 5-1
[5] CONSUMABLE PARTS
1.Supply system table
Note: The consumable parts are the same as those of the AR-M350/M450 and the AR-P350/P450.
A.USA
*1: For
USA
Government
Note1: Print on Master/individual carton:Toner/Developer in 2 languages (English/French), DR in 4 languages (English/French/German/Spanish).
Note2: Packed with machine: DR 50K/Developer UN/Process UN
Note3: The other maintenance parts which are not listed above are registered as service parts.
Note2: Packed with machine: DR 50K/Developer UN/Process UN
Note3: The other maintenance parts which are not listed above are registered as service parts.
B.Europe
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish).
Note2: Packed with machine: DR 50K/Developer UN/Process UN
Note3: The other maintenance parts which are not listed above are registered as service parts.
Note2: Packed with machine: DR 50K/Developer UN/Process UN
Note3: The other maintenance parts which are not listed above are registered as service parts.
NO
Name
Content
Life
Product name
Remark
1
Toner CA(Black)
Toner(Toner : Net Weight 814g)
27K
AR-450NT
(*1 AR-450NT-J)
(*1 AR-450NT-J)
*Life setup is based on A4 6%
2
Developer
Developer(Developer : Net Weight 450g)
100K
AR-450ND
3
Drum
Drum
x1
50K
AR-450DR
4
50K maintenance kit
Cleaner blade
Drum separation pawl
Screen grid
Toner reception seal
Side malt F
Side malt R
Charging plate
Drum separation pawl
Screen grid
Toner reception seal
Side malt F
Side malt R
Charging plate
x1
x4
x1
x1
x1
x1
x1
x4
x1
x1
x1
x1
x1
50K
AR-450KC1
5
100K maintenance kit
Transfer roller
Discharging plate
Paper dust removing unit
DV blade
DV side seal F
DV side seal R
Discharging plate
Paper dust removing unit
DV blade
DV side seal F
DV side seal R
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
100K
AR-450KA1
6
Upper heat roller kit
Upper heat roller
Fusing separation pawl (Upper)
Fusing separation pawl (Upper)
x1
x4
x4
200K
AR-450UH
7
Lower heat roller kit
Lower heat roller
Fusing separation pawl (Lower)
Fusing separation pawl (Lower)
x1
x2
x2
200K
AR-450LH
8
Cleaner blade
Cleaner blade
x10
50K(x10)
AR-450CB
AR-450CB=(AR-450BL)x10
9
Cleaning roller
Cleaning roller
Bearing
Bearing
x10
x20
x20
200K(x10) AR-450CR
AR-450CR=(AR-450RC)x10
10
Staple cartridge
Staple cartridge
x3
3000x3
AR-SC1
Common with cartridge for AR-FN4 &
AR-FN6
AR-FN6
11
Staple cartridge
Staple cartridge
x3
5000x3
AR-SC2
Common with cartridge for AR-FN7
NO
Name
Content
Life
Product name
Remark
1
Toner CA(Black)
Toner(Toner : Net Weight 814g)
27K
AR-450T
*Life setup is based on A4 6%
2
Developer
Developer(Developer : Net Weight 450g)
100K
AR-450DV
3
Drum
Drum
x1
50K
AR-450DM
4
50K PM kit
Cleaner blade
Drum separation pawl
Screen grid
Toner reception seal
Side malt F
Side malt R
Charging plate
Drum separation pawl
Screen grid
Toner reception seal
Side malt F
Side malt R
Charging plate
x1
x4
x1
x1
x1
x1
x1
x4
x1
x1
x1
x1
x1
50K
AR-450KC
5
100K PM kit
Transfer roller
Discharging plate
Paper dust removing unit
DV blade
DV side seal F
DV side seal R
Discharging plate
Paper dust removing unit
DV blade
DV side seal F
DV side seal R
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
100K
AR-450KA
6
200K PM kit
Upper heat roller
Lower heat roller
Fusing separation pawl (Upper )
Fusing separation pawl (Lower)
Cleaning roller
Bearing
Lower heat roller
Fusing separation pawl (Upper )
Fusing separation pawl (Lower)
Cleaning roller
Bearing
x1
x1
x4
x2
x1
x2
x1
x4
x2
x1
x2
200K
AR-450KB
7
Staple cartridge
Staple cartridge
x3
3000x3
AR-SC1
Common with cartridge for AR-FN4 &
AR-FN6
AR-FN6
8
Staple cartridge
Staple cartridge
x3
5000x3
AR-SC2
Common with cartridge for AR-FN7
" #$%&'(
AR-M350U CONSUMABLE PARTS 5-2
2.Production number identification
A. Drum cartridge
The lot number, printed on the front side flange, is composed of 10 digits,
each digit showing the following content:
each digit showing the following content:
B. Toner cartridge
The lot number is composed of 7 digits, and each digit indicates as
following.
The lot number shall is printed in the position shown below.
C. Developer
The lot number is composed of 8 digit, and each digit indicates as
following.
following.
The lot number shall be printed on the bag.
3. Environmental conditions
A. Operating conditions
B. Storage conditions
1
2
3
4
5
6
7
8
9
10
1
Number
For this model, this digit is 2.
For this model, this digit is 2.
2
Alphabet
Indicates the model conformity code. T for this model.
Indicates the model conformity code. T for this model.
3
Number
Indicates the end digit of the production year.
Indicates the end digit of the production year.
4
Number or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December.
Indicates the production month.
X stands for October, Y November, and Z December.
5/6
Number
Indicates the production day on the month.
Indicates the production day on the month.
7
Number or X, Y, Z
Indicates the month of packing.
X stands for October, Y November, and Z December.
Indicates the month of packing.
X stands for October, Y November, and Z December.
8/9
Number
Indicates the day of the month of packing.
Indicates the day of the month of packing.
10
Alphabet
Indicates the production factory. "A" for Nara Plant.
Indicates the production factory. "A" for Nara Plant.
1
2
3
4
5
6
7
1
Version number (A - sequentially revised)
2
Numeral figure
Indicates the end digit of the production year.
Indicates the end digit of the production year.
3
Alphabet
Indicates the production factory. (B for SOCC)
Indicates the production factory. (B for SOCC)
4
Destination code
5,6
Numeral figures
Indicates the production day.
Indicates the production day.
7
Numeral figure or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December.
Indicates the production month.
X stands for October, Y November, and Z December.
Lot No. Location
Lot No. Location
Aluminum bag
Heat seal
1
2
3
4
5
6
7
8
1
Alphabet
Indicates the production factory.
Indicates the production factory.
2
Figure
Indicates the production year.
Indicates the production year.
3/4
Figure
Indicates the production month.
Indicates the production month.
5/6
Figure
Indicates the production day.
Indicates the production day.
7
Hyphenation
8
Figure
Indicates the production lot.
Indicates the production lot.
Temperature
Humidity (%)
85
20
10
35
(Without dew condensation)
30
85%
35
60%
Temperature
Humidity (%)
90
20
-10
40
(Without dew condensation)
"# $%&'(
AR-M350U UNPACKING AND INSTALLATION 6-1
[6] UNPACKING AND INSTALLATION
1. Installing procedure flowchart
There are many combinations between this machine and option units. For installing option units, observe the following procedures for efficiency.
To install the devices efficiently, follow the procedure below.
Some peripheral devices may have been installed as standard devices depending on the main unit model.
Some peripheral devices may have been installed as standard devices depending on the main unit model.
Part of descriptions and illustrations may be different.
*
When installing an option, refer to the Service Manual for that option and or the AR-M350 / M450 Service Manual.
Scanner/document feeder device
Main unit
Main unit
Finishing device
Finishing device
Duplex/bypass device
Finishing device
Paper feeding device
Duplex device
Paper feeding device
Scanner/document feeder device
Start of installation
End
AR-D13 /AR-DC1
AR-D14 /AR-DC1
AR-D14 /AR-DC1
Main unit
*
AR-EF1 /AR-RK1
AR-HD3
AR-FX5/AR-MM9
AR-PK1
AR-NS2
AR-NC5J
(Not required for the AR-M350N/M450N)
AR-FX5/AR-MM9
AR-PK1
AR-NS2
AR-NC5J
(Not required for the AR-M350N/M450N)
AR-P14
(Only AR-M350U/M450U)
Extended memory
AR-D13/AR-D14/
AR-DU3/AR-DU4
AR-DU3/AR-DU4
AR-DU3
AR-DU4
AR-DU4
AR-MS1/AR-DC1
AR-FN6 /AR-DC1
AR-FN7
AR-PN1A / B / C / D
AR-FN6 /AR-DC1
AR-FN7
AR-PN1A / B / C / D
No
Yes
Duplex/bypass
device installed?
No
No
No
Finishing device
installed?
Scanner/document
feeder installed?
Yes
Yes
Yes
Controller board,
facsimile unit or other
electric devices
installed?
When installing a paper feeding device, an optional power supply unit or a duplex/bypass device, be
sure to re-attach the rear cabinet, the AC inlet cover, and the harness cover of the main unit at the
end of installation as needed.
When installing a controller board, a facsimile unit, and other electric devices, be sure to install them
one at a time.
Only off center adjustment is needed for AR-DU3.
sure to re-attach the rear cabinet, the AC inlet cover, and the harness cover of the main unit at the
end of installation as needed.
When installing a controller board, a facsimile unit, and other electric devices, be sure to install them
one at a time.
Only off center adjustment is needed for AR-DU3.
Install controller board,
facsimile unit or other electric
devices.
facsimile unit or other electric
devices.
2) Paper guide position adjustment/off center adjustment
1) Installation of driver software, setting,
and operation check
and operation check
Main unit/AR-EF1/AR-NC5J/AR-HD3/
AR-FX5/AR-PK1/AR-NS2/AR-P14
AR-FX5/AR-PK1/AR-NS2/AR-P14
[Electrical setting/adjustment]
Main unit, paper feeding
device, and power supply
unit.
device, and power supply
unit.
Install duplex/pypass device.
Install finishing device.
Install scanner/document feeder.
" #$%&'
AR-M350U UNPACKING AND INSTALLATION 6-2
2. AR-P14 installing procedure
<Before installation>
*
This installation procedure is provided for use with the AR-M350U/
M450U series.
*
To connect this machine to a network, a Print Server Card (NIC) AR-
NC5J must be installed to the multi-function controller board in
advance.
*
To enable the printer expansion function, the product key must be
acquired.
acquired.
The application number, machine serial number, and product key
number are important information.
number are important information.
Keep the above information for future reference.
1) Mount the printer expantion kit ROMs to the control PWB.
<1>Turn off the main switch of the main unit of the printer
<1>Turn off the main switch of the main unit of the printer
Turn the main switch located on the front side of the main unit to the
"OFF" position.
If the machine is equipped with a facsimile unit, also turn off the FAX
If the machine is equipped with a facsimile unit, also turn off the FAX
power switch.
Then remove the power plug from the outlet.
.
.
<2>Remove the cables connected to the control PWB unit.
Remove all the cables connected to the control PWB unit of the main unit
of the printer.
of the printer.
<3>Remove the control PWB unit.
Remove the five screws that fix the control PWB unit to the main unit of
Remove the five screws that fix the control PWB unit to the main unit of
the printer.
Then, hold the two grips and pull out the control PWB unit to remove it
from the main unit.
from the main unit.
<4>Mount the printer expansion kit ROMs(2 pcs.)to the control PWB.
Remove the ROMs(main and boot ROMs)from the control PWB and
replace them with the two ROMs(main and boot ROMs)of the printer
expansion kit.
expansion kit.
The main and boot ROMs are indicated with "MAIN" and "BOOT" on the
labels on the ROMs respectively.
When mounting the printer expansion kit ROMs, insert them to the same
When mounting the printer expansion kit ROMs, insert them to the same
positions in the same direction as those before replacement and ensure
that the inserted printer expansion kit ROMs are locked with the fittings
of the sockets.
of the sockets.
<5>Re-attach the control PWB.
Attach the control PWB to the main unit of the printer and fix it using five
Attach the control PWB to the main unit of the printer and fix it using five
screws.
( " #$%&'
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man9) service manuals if exist.