DOWNLOAD Sharp AR-M35 / AR-M450 (serv.man77) Service Manual ↓ Size: 279.85 KB | Pages: 7 in PDF or view online for FREE

ARE370

Sharp Electronics (UK) Ltd., Technical Services Group

ARE370

Sharp Electronics (UK) Ltd., Technical Services Group

ARE370

Sharp Electronics (UK) Ltd., Technical Services Group

[Details on upgraded user interface]

1. Line Thickness  

This function is used to adjust the line thickness of the vector graphics for printing.
Note) Normally, there is no need to change the line thickness because it is defined by the
printer core.
However, this function would be useful for CAD or other particular purposes where
adjusting the line thickness is required.
The list below shows the relationship between the setting value and the enlargement ratio
of line thickness.

For example, when the Line Thickness is set to “4”, the thickness of the printed line will be
0.95 times as thick as the standard thickness defined by the printer core. When the
setting is 9, the result will be 1.5 times as thick as the standard thickness, and so forth. It
should be noted that each line will be printed as “1 dot line” when it is set to 0.

0

1

2

3

4

5

6

7

8

9

All 1dot

0.5

0.75

0.9

0.95

1

1.05

1.10

1.25

1.5

ARE370

Sharp Electronics (UK) Ltd., Technical Services Group

*Operation via MFP operation panel
(1) Press the [PRINTER] key on the operation panel to access the printer mode screen.
(2) Press [CONDITION SETTINGS] on the printer mode screen to access the printer
operation condition settings screen.
(3) Press [DEFAULT SETTINGS] on the condition settings screen to access the default
settings screen.
(4) Press [LINE THICKNESS] on the second page of the default settings screen to access
the line thickness setting screen.
(5) Press the [UP]/[DOWN] key to select the setting you want, and then press [OK].

*Operation via printer engine
(1) Press [Menu], select [SET CONDITION SETTINGS], and then press [OK].
(2) Press [DEFAULT SETTINGS], and then [OK].
(3) Select [LINE THICKNESS] by pressing the [UP]/[DOWN] key, and then press [OK].
(4) Press the [UP]/[DOWN] key to select the setting you want, and then press [OK].

2. Extra Print Mode

*This function is used to improve the printing efficiency for continuously sent jobs in the
same format when printing out documents from a user application.
Note) When outputting normal office documents, the print job contains multiple pages,
therefore there is no need to set this function.
With the printout system on current Tiger series, the engine does not start processing the
next print job until it completely outputs the pages for the current print job. In a printing
environment where most of the print jobs contain a single page, this system decreases
the printing efficiency because it can cause an increased number of pauses between print
jobs.

*This function is used to reduce the waiting time between print jobs to increase printing
efficiency by recognizing some jobs as a series of print jobs.

*The print job name to which this mode is applied is changed to [CONTINUOUS PRINT]
to be displayed on the status screen.

*Operation specifications
Factory Default setting: OFF (MFP: The check box is not checked/ Printer: OFF)

*Operation via MFP operation panel
(1) Press the [PRINTER] key on the operation panel to access the printer mode screen.
(2) Press [CONDITION SETTINGS] on the printer mode screen to access the condition
settings screen for the printer.
(3) Press [DEFAULT SETTINGS] on the condition settings screen to access the default
settings screen.

(4) Check the [EXTRA PRINT MODE] check box on the second page of the default
settings screen.

*Operation via printer engine
(1) Press [Menu], select [SET CONDITION SETTINGS], and then press [OK].
(2) Press [DEFAULT SETTINGS], and then [OK].
(3) Select [EXTRA PRINT MODE] by pressing the [UP]/[DOWN] key, and then press [OK].
(4) Press the [UP]/[DOWN] key to select ON, and then press [OK].

*The following conditions must be met to start the extra print mode.
(1) There must be a 3 sec. + pause between jobs.
(2) In duplex mode, the document must end with an odd numbered page.

*Limitations
(1) Under any of the following conditions the EXTRA PRINT MODE does not work.
The EXTRA PRINT MODE does not work with the auditing mode on.
The EXTRA PRINT MODE does not work when 2+ copies are set via the printer driver.