DOWNLOAD Sharp AR-M35 / AR-M450 (serv.man75) Service Manual ↓ Size: 563.54 KB | Pages: 6 in PDF or view online for FREE

Model
AR-M35 AR-M450 (serv.man75)
Pages
6
Size
563.54 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ROM upgrade
File
ar-m35-ar-m450-sm75.pdf
Date

Sharp AR-M35 / AR-M450 (serv.man75) Service Manual / Technical Bulletin ▷ View online

ARE376
Sharp Electronics (UK) Ltd., Technical Services Group
Current parts
New parts
Ref
.
No.
Model
Name
Versio
n
P/G
No.
Parts code
Parts code
Price
rank
Parts name
Effectiv
e
time
!"#$%&
'()"*
$&
)+,-,#.
Note
AR-EF1
ALL
34 - 5
PSHEP4915FCZ
Z
PSHEP4915FCZ
1
AD
PS rear
mylar
2002/4
Running
change
3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current
type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new
type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
Specified ones for maintaining the safety and performance of the set.
2. The function was added so that the image loss area was created in network scanner
mode by enhancing the Soft SW40-6 for checking/changing the settings for simulation
66-1 software.  (Except AR-P350 / P450,.)
When an image was sent by e-mail, a shadow of the rear edge of the original was
trransfered to the sending image. To correct this situation, the function was added so
that the image loss area was created on the rear edge of the originals before scanning.
This function is set using Simulation 66-1 (FAX software SW setup) as shown below.
(No measures in the default setting)
Simulation 66-1 Software
SW40-6
Set ”0”
(Default)
Set ”1”
Image Loss area
on the rear edge of original
None (current)
Available
(the shadow area is eliminated.)
ARE376
Sharp Electronics (UK) Ltd., Technical Services Group
3. We corrected the adjustment failure of SPF-SIDE 2 (Original Off-Center Adjustment) in
Simulation 50-12-5. (Except AR-P350/P450,.)
In SPF-SIDE 2 adjustment (Original Off-Center Adjustment) in Simulation 50-12-5,
even after the value was changed, approx. 5mm was out of center position if the copy-
adjusted center position on the back page of the original is compared to the center
position on the back page of the original when normally copied. This was corrected
when the Main ROM is upgraded.
The target version of this upgrade is VmA.08 manufactured in March and April 2002.
Please note that any earlier versions for production was not affected.
3.Action:
From the first lot in May 2002.
ARE376
Sharp Electronics (UK) Ltd., Technical Services Group
ARE376
Sharp Electronics (UK) Ltd., Technical Services Group
Page of 6
Display

Sharp AR-M35 / AR-M450 (serv.man75) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-M35 / AR-M450 (serv.man75) Service Manual ↓ Size: 563.54 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-M35 / AR-M450 (serv.man75) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-M35 / AR-M450 (serv.man75) Copying Equipment. Information contained in Sharp AR-M35 / AR-M450 (serv.man75) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.