Sharp AR-M35 / AR-M450 (serv.man7) Handy Guide ▷ View online
Firmware History
Version 2.0
Issue 01/02
36
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Tiger (P)
FIRMWARE
FIRMWARE
Last Update
Apr-02
ARP350/450
MAIN PCU Revision/Correction
Made
Production
V4.10 V2.12 Previously, the machine did not recover from auto-shut off mode. This
failure is fixed in this version. The detection of Empty/Not empty/Full is
added to the saddle stitch tray status when using S-MON/PAU.
added to the saddle stitch tray status when using S-MON/PAU.
June 01
V5.09 V3.01 AR-FN7 “High speed stacking mode” is added to Key Operator Program.
Previously, a paper jam between the ADU and the main unit could not be
cleared without opening/closing the left cover twice. This failure is fixed
in this version.
cleared without opening/closing the left cover twice. This failure is fixed
in this version.
Jul-01
V6.06 V3.04 A change is made for compatibility with AR-PF1.
Aug-01
V6.06 V3.06 The message “Copying” was indicated and the machine hung up. This
failure is corrected. The default value of Sim.46-26 (Pattern Matching
Function when the fax data is sent.) the value is changed to ‘0’ (the
pattern matching function is available).
Function when the fax data is sent.) the value is changed to ‘0’ (the
pattern matching function is available).
Sep-01
V8.02 V5.00 The rotate-sorting function setting is available in Key OP (Checkbox
On/Off). The font list printing function is added on AR-PF1. The support
for binary mode is added.
for binary mode is added.
Oct-01
V9.07 V6.04 It is possible to change the maintenance cycle setting in “MNT CYCLE
SET UP” in the dialogue. However, Please be sure to select “No” for the
“LIFE OVER SETTING” in the dialogue.
“LIFE OVER SETTING” in the dialogue.
Dec-01
Ve.08 V7.02 1) Added [LINE THICKNESS] to the Default settings of the printer
condition settings
2) Added [EXTRA PRINT MODE] to the Default settings of the printer
condition settings
3) Added [DISABLING OF BYPASS PRINTING] to key operator
programs
4) Beep setting
5) Changed the process when exceeding staple capacity for saddle
stitching
6) If the amount of paper exceeds the capacity before printing in saddle
stitch B mode, the job stops.
7) ”7: 100K” was added for a value of Sim21-1 Maintenance Cycle
setting.
2) Added [EXTRA PRINT MODE] to the Default settings of the printer
condition settings
3) Added [DISABLING OF BYPASS PRINTING] to key operator
programs
4) Beep setting
5) Changed the process when exceeding staple capacity for saddle
stitching
6) If the amount of paper exceeds the capacity before printing in saddle
stitch B mode, the job stops.
7) ”7: 100K” was added for a value of Sim21-1 Maintenance Cycle
setting.
Jun-02
Connectivity
Version 2.0
Issue 01/02
37
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Procedure for assigning manual (static) IP Address through the copier’s operation panel
AR-P350/450
1.
Press the 'MENU' key 4 times
2.
The Operator panel will display "Key Operator Programs". Press the 'OK' key.
3.
Enter the Key Operator code (default setting is '00000').
4.
Press the Down Arrow key 6 times.
5.
The Operator panel will display "SYSTEM SETTINGS". Press the 'OK' key.
6.
Press the Down Arrow key twice.
7.
The Operator panel will display "NETWORK SETTINGS". Press the 'OK' key.
8.
The Operator panel will display "IP ADDRESS SETTING". Press the 'OK' key.
9.
The Operator panel will display "ENABLE DHCP".
10.
Press the Down Arrow key to toggle from "YES*" to "NO". Press the 'OK' key.
11.
The Operator panel will display "IP ADDRESS". Press the 'OK' key.
12.
Enter the IP address in a similar way to entering the Key Operator code.
13.
The Operator panel will display the message "COMPLETE THE SETTING BY POWER
OFF/ON". Wait for a few seconds until the display reverts to "IP ADDRESS".
OFF/ON". Wait for a few seconds until the display reverts to "IP ADDRESS".
14.
Press the Down Arrow key.
15.
The Operator panel will display "IP SUBNET MASK". Press the 'OK' key.
16.
Enter the Subnet mask in a similar way as the IP address.
17.
The Operator panel will display the message "COMPLETE THE SETTING BY POWER
OFF/ON". Wait for a few seconds until the display reverts to "IP SUBNET MASK".
OFF/ON". Wait for a few seconds until the display reverts to "IP SUBNET MASK".
18.
Power cycle the printer.
AR-M350/450
1.
Press 'CUSTOM SETTINGS' key.
2.
Press 'KEY OPERATOR PROGRAMS' key.
3.
Enter Key Operator Code (default setting is '00000').
4.
Press the 'PRINT SETTINGS' key
5.
Press the 'NETWORK SETTINGS' key
6.
Press the 'IP ADDRESS SETTING' key.
7.
Enter the IP address and the sub-net mask, then uncheck the 'DHCP' box.
8.
Power cycle the copier.
Connectivity
Version 2.0
Issue 01/02
38
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Procedure for activating an ARNS2
The ARNS2 is an optional integral Network Scanner for the ARP350/450 and ARM350/450 range of products.
Upon purchasing this option, you will receive an operation manual and a “Sharpdesk” CDROM. The front of the
operation manual details a unique code which when registered, on a Sharp Internet site, along with the Copier
Serial number, provides an activation key which unlocks the Network Scanner functions within the Copier. This
bulletin explains this procedure in detail.
Procedure:
1.
Upon purchasing this option, you will receive an operation manual and a “Sharpdesk” CDROM. The front of the
operation manual details a unique code which when registered, on a Sharp Internet site, along with the Copier
Serial number, provides an activation key which unlocks the Network Scanner functions within the Copier. This
bulletin explains this procedure in detail.
Procedure:
1.
Make a note of the Copier serial number upon which the ARNS1 Scanner is to be activated.
2.
Make a note of the Application number from the front of the ARNS1 operation manual.
3.
Access the following URL,
http://tech-ds.sharp.co.jp/key
with the user name and password indicated.
(Notice that the URL does not start http://www.)
User Name:
KeyUser
Password:
key000323
4.
After logging on to the site, click on the British Flag.
5.
Register the ARNS1 against the Sharp Copier Serial number by completing the web form
6.
After clicking on the submit button, an email will be sent to the address of the dealer representative,
containing the product activation key.
containing the product activation key.
7.
Upon receiving the activation key, enter custom settings, Key operator, Product key entry then Network
scanner expansion on the copier and input the activation key.
scanner expansion on the copier and input the activation key.
Notes
Version 2.0
Issue 01/02
39
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man7) service manuals if exist.