DOWNLOAD Sharp AR-M35 / AR-M450 (serv.man12) Service Manual ↓ Size: 7.51 MB | Pages: 112 in PDF or view online for FREE

Model
AR-M35 AR-M450 (serv.man12)
Pages
112
Size
7.51 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual Section 2 - Disassembly, Machine Operation, Adjustments, Simulations, Trouble Codes
File
ar-m35-ar-m450-sm12.pdf
Date

Sharp AR-M35 / AR-M450 (serv.man12) Service Manual ▷ View online

AR-M350 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-9
b. Stopper solenoid
1) Remove the upper transport unit cover. 
2) Remove the stopper solenoid.
c. Sensors
1) Remove the upper transport unit cover. 
2) Remove the sensors.
d. (D) SPF control PWB
1) Remove the SPF PWB, and remove the (D) SPF control PWB.
e. Original length sensor
1) Remove the OC cover.
2)Remove the original length sensor cover, and remove the sensor.
f. Original width detection volume
1) Remove the OC cover. 
2) Remove the original length sensor cover. 
3) Remove the volume cover and remove the volume.
1)
1)
2)
1)
2)
3)
4)
3)
4)
3)
4)
1)
2)
3)
3)
3)
4)
5)
4)
4)
1)
1)
2)
3)
4)
3)
1)
1)
2)
3)
3)
4)
4)
1)
1)
2)
3)
4)
 .    ! "#$%&'
AR-M350 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-10
Original width detection volume installation
<1>Extend the original guide to the maximum position. 
<2>Adjust so that the mark on the width detection pinion gear is fitted
with the mark on the volume mounting plate. 
<3>Fix the mounting plate with the screw. 
*
When the rotational volume sensor is replaced, the sensor value
must be adjusted to the paper size (mark on the tray). 
(Refer to the SIM 53-6 or 53-7.)
g. Original paper feed unit
1) Remove the OC cover. 
2) Remove the SPF lower cover.
3) Remove the original paper feed unit.
h. Take-up roller, paper feed roller
1) Remove the upper transport unit cover. 
2) Remove the paper feed roller cover.
3) Remove the hook of each roller, and remove each roller.
i. CIS unit
1) Remove the upper transport unit cover. 
2) Remove the CIS unit.
*
When the CIS unit is replaced, the CIS shading adjustment must be
performed. (Refer to the descriptions of ADJUSTMENTS.)
1)
2)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
3)
1)
2)
3)
4)
1)
1)
2)
     ! "#$%&'
AR-M350 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-11
3) Remove the cover, and remove the CIS control PWB.
*
For easy installation of the cover, slide the earth line to the connector
side when attaching. 
Note: The CIS unit is factory-adjusted before shipping. 
Since these adjustments cannot be performed in the 
market, never touch the following screws of the CIS unit.
j. Open sensor
1) Remove the open sensor.
k. Paper exit sensor
1) Remove the paper exit sensor.
l. Paper exit roller
1) Remove the original paper feed unit. 
2) Remove the paper exit roller gear.
3) Remove the paper exit frame, and remove the paper exit roller.
1)
2)
2)
2)
2)
3)
1)
1)
1)
a
a
a
1)
2)
1)
2)
1)
2)
3)
4)
5)
6)
1)
2)
3)
3)
3)
4)
5)
7)
     ! "#$%&'
AR-M350 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-12
m. SPF motor
1) Remove the original paper feed unit. 
2) Remove the SPF drive unit.
3) Remove the SPF motor.
n. SPF resist roller, SPF resist roller clutch
1) Remove the SPF resist roller unit.
2) Remove the SPF resist roller and the SPF resist roller clutch.
o. SPF paper feed unit, original paper feed solenoid, 
SPF original paper feed clutch 
1) Remove the SPF paper feed unit. 
2) Remove the SPF paper guide.
3) Remove the SPF pickup unit.
4) Remove the original paper feed solenoid and the SPF original paper
feed clutch.
1)
1)
2)
2)
3)
4)
1)
1)
1)
2)
3)
3)
2)
3)
4)
1)
1)
2)
3)
4)
5)
1)
6)
1)
1)
2)
1)
1)
1)
2)
1)
2)
3)
4)
 (    ! "#$%&'
Page of 112
Display

Click on the first or last page to see other AR-M35 / AR-M450 (serv.man12) service manuals if exist.