Sharp AR-M316 (serv.man69) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
3. Changes
No Item
Description
1
Printer Port Monitor MIB has been added to support Vista.
2
When PDF direct print is performed after the PCL job, the PDF job is printed with the data garbled. This
problem has been fixed.
problem has been fixed.
3
When connecting with a specific server, the same data may be printed repeatedly every 90 seconds. This
problem has been fixed.
problem has been fixed.
4
When printing a specific data, F9-88 error may occur during the print job. This problem has been fixed.
5
When PDF data including characters created in a special font is printed in 2-up from the PS driver, it is
printed with the characters broken. This problem has been fixed.
printed with the characters broken. This problem has been fixed.
6
When downloading and printing a form including a specific data from a PC, printer error occurs. This
problem has been fixed.
problem has been fixed.
7
AR Minchotai U font is printed with square and thinner than normal. This problem has been fixed.
8
A specific document cannot be printed from the PS driver of Mac. This problem has been fixed.
9
When printing a specific PDF data from Acrobat7 of Mac, the machine is rebooted.
10
Direct print of the LZW-compressed TIFF data in large paper size (A1) is not possible.
11
The downloaded PCL font cannot be printed correctly. This problem has been fixed.
12
When direct print of the TIFF file is performed in succession with the special print mode (overseas: Extra
Print) on, the 2nd file may not be printed. This problem has been fixed.
Print) on, the 2nd file may not be printed. This problem has been fixed.
13
MSS (Maximum Segment Size) is not supported, and communication error occurs in a specific network
environment. This problem has been fixed.
environment. This problem has been fixed.
14
Special network environment where communication is rejected if the TCP acknowledge number begins
from zero is supported.
from zero is supported.
15
In an environment mixing LPR and RAW (Port9100) of the communication protocol, if printing is
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
16
Printer
relation
Although printing is performed in boldface, normal characters are printed partially. This problem has been
fixed.
fixed.
Sharp Electronics (UK) Ltd., Document Systems Support
3. Changes
No Item
Description
1
Printer Port Monitor MIB has been added to support Vista.
2
When PDF direct print is performed after the PCL job, the PDF job is printed with the data garbled. This
problem has been fixed.
problem has been fixed.
3
When connecting with a specific server, the same data may be printed repeatedly every 90 seconds. This
problem has been fixed.
problem has been fixed.
4
When printing a specific data, F9-88 error may occur during the print job. This problem has been fixed.
5
When PDF data including characters created in a special font is printed in 2-up from the PS driver, it is
printed with the characters broken. This problem has been fixed.
printed with the characters broken. This problem has been fixed.
6
When downloading and printing a form including a specific data from a PC, printer error occurs. This
problem has been fixed.
problem has been fixed.
7
AR Minchotai U font is printed with square and thinner than normal. This problem has been fixed.
8
A specific document cannot be printed from the PS driver of Mac. This problem has been fixed.
9
When printing a specific PDF data from Acrobat7 of Mac, the machine is rebooted.
10
Direct print of the LZW-compressed TIFF data in large paper size (A1) is not possible.
11
The downloaded PCL font cannot be printed correctly. This problem has been fixed.
12
When direct print of the TIFF file is performed in succession with the special print mode (overseas: Extra
Print) on, the 2nd file may not be printed. This problem has been fixed.
Print) on, the 2nd file may not be printed. This problem has been fixed.
13
MSS (Maximum Segment Size) is not supported, and communication error occurs in a specific network
environment. This problem has been fixed.
environment. This problem has been fixed.
14
Special network environment where communication is rejected if the TCP acknowledge number begins
from zero is supported.
from zero is supported.
15
In an environment mixing LPR and RAW (Port9100) of the communication protocol, if printing is
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
16
Printer
relation
Although printing is performed in boldface, normal characters are printed partially. This problem has been
fixed.
fixed.
Sharp Electronics (UK) Ltd., Document Systems Support
3. Changes
No Item
Description
1
Printer Port Monitor MIB has been added to support Vista.
2
When PDF direct print is performed after the PCL job, the PDF job is printed with the data garbled. This
problem has been fixed.
problem has been fixed.
3
When connecting with a specific server, the same data may be printed repeatedly every 90 seconds. This
problem has been fixed.
problem has been fixed.
4
When printing a specific data, F9-88 error may occur during the print job. This problem has been fixed.
5
When PDF data including characters created in a special font is printed in 2-up from the PS driver, it is
printed with the characters broken. This problem has been fixed.
printed with the characters broken. This problem has been fixed.
6
When downloading and printing a form including a specific data from a PC, printer error occurs. This
problem has been fixed.
problem has been fixed.
7
AR Minchotai U font is printed with square and thinner than normal. This problem has been fixed.
8
A specific document cannot be printed from the PS driver of Mac. This problem has been fixed.
9
When printing a specific PDF data from Acrobat7 of Mac, the machine is rebooted.
10
Direct print of the LZW-compressed TIFF data in large paper size (A1) is not possible.
11
The downloaded PCL font cannot be printed correctly. This problem has been fixed.
12
When direct print of the TIFF file is performed in succession with the special print mode (overseas: Extra
Print) on, the 2nd file may not be printed. This problem has been fixed.
Print) on, the 2nd file may not be printed. This problem has been fixed.
13
MSS (Maximum Segment Size) is not supported, and communication error occurs in a specific network
environment. This problem has been fixed.
environment. This problem has been fixed.
14
Special network environment where communication is rejected if the TCP acknowledge number begins
from zero is supported.
from zero is supported.
15
In an environment mixing LPR and RAW (Port9100) of the communication protocol, if printing is
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
16
Printer
relation
Although printing is performed in boldface, normal characters are printed partially. This problem has been
fixed.
fixed.
Sharp Electronics (UK) Ltd., Document Systems Support
3. Changes
No Item
Description
1
Printer Port Monitor MIB has been added to support Vista.
2
When PDF direct print is performed after the PCL job, the PDF job is printed with the data garbled. This
problem has been fixed.
problem has been fixed.
3
When connecting with a specific server, the same data may be printed repeatedly every 90 seconds. This
problem has been fixed.
problem has been fixed.
4
When printing a specific data, F9-88 error may occur during the print job. This problem has been fixed.
5
When PDF data including characters created in a special font is printed in 2-up from the PS driver, it is
printed with the characters broken. This problem has been fixed.
printed with the characters broken. This problem has been fixed.
6
When downloading and printing a form including a specific data from a PC, printer error occurs. This
problem has been fixed.
problem has been fixed.
7
AR Minchotai U font is printed with square and thinner than normal. This problem has been fixed.
8
A specific document cannot be printed from the PS driver of Mac. This problem has been fixed.
9
When printing a specific PDF data from Acrobat7 of Mac, the machine is rebooted.
10
Direct print of the LZW-compressed TIFF data in large paper size (A1) is not possible.
11
The downloaded PCL font cannot be printed correctly. This problem has been fixed.
12
When direct print of the TIFF file is performed in succession with the special print mode (overseas: Extra
Print) on, the 2nd file may not be printed. This problem has been fixed.
Print) on, the 2nd file may not be printed. This problem has been fixed.
13
MSS (Maximum Segment Size) is not supported, and communication error occurs in a specific network
environment. This problem has been fixed.
environment. This problem has been fixed.
14
Special network environment where communication is rejected if the TCP acknowledge number begins
from zero is supported.
from zero is supported.
15
In an environment mixing LPR and RAW (Port9100) of the communication protocol, if printing is
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
performed from multiple PCs in succession, F9-88 error occurs randomly. This problem has been fixed.
16
Printer
relation
Although printing is performed in boldface, normal characters are printed partially. This problem has been
fixed.
fixed.
Display