Sharp AR-M316 (serv.man15) User Manual / Operation Manual ▷ View online
5
INSTALLING THE SOFTWARE
CUSTOM INSTALLATION
The procedure for a custom installation of the software is explained below. Use the custom installation
procedure when the machine is connected by a parallel cable, when the machine is used as a shared
printer on a network, or when installing the PC-Fax driver.
procedure when the machine is connected by a parallel cable, when the machine is used as a shared
printer on a network, or when installing the PC-Fax driver.
Installation in Windows XP (USB/Parallel cable)
1
The USB or parallel cable must not be
connected to the machine. Make sure
that the cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
connected to the machine. Make sure
that the cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
computer's CD-ROM drive.
3
Click the "start" button, click "My
Computer" (
Computer" (
), and then double-click
the [CD-ROM] icon (
).
4
Double-click the "Setup" icon (
).
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
6
Read the message in the "Welcome"
window and then click the "Next" button.
window and then click the "Next" button.
7
Click the "Custom" button.
8
Click the "Printer Driver" button.
Before installing the software, be sure to
click the [Display Readme] button and
view the detailed information on the
software.
click the [Display Readme] button and
view the detailed information on the
software.
T
9
Click the "Next" button.
The cable will be connected in step
15.
15.
You can show the "SOFTWARE
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
Note
Note
!!install_ar230270.book 5 ページ 2006年12月25日 月曜日 午後2時38分
6
INSTALLING THE SOFTWARE
10
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next" button.
connected, select "Connected to this
computer" and click the "Next" button.
11
A confirmation window appears. Check
the contents and then click the "Next"
button.
the contents and then click the "Next"
button.
12
Click the "Next" button.
Begin installation of the printer driver.
13
When "The installation of the SHARP
software is complete" appears, click
the "OK" button.
software is complete" appears, click
the "OK" button.
14
Click the "Close" button.
A message will appear instructing you to
connect the machine to your computer.
Click the "OK" button.
connect the machine to your computer.
Click the "OK" button.
15
Connect the interface cable to the
machine and your computer (page 13).
machine and your computer (page 13).
•
If you are using a USB cable, make
sure the machine's power is turned on
and then connect the cable.
sure the machine's power is turned on
and then connect the cable.
•
If you are using a parallel cable, turn
off the power of the machine and your
computer, connect the cable, turn on the
power of the machine, and then turn on
your computer.
off the power of the machine and your
computer, connect the cable, turn on the
power of the machine, and then turn on
your computer.
Windows will detect the machine and the
Plug and Play screen will appear.
Plug and Play screen will appear.
16
Begin installation of the printer driver.
"SHARP AR-XXXX" will appear in the
"Found New Hardware Wizard" dialog box.
Select "Install the software automatically
(Recommended)" and click the "Next"
button. Follow the on-screen instructions.
"Found New Hardware Wizard" dialog box.
Select "Install the software automatically
(Recommended)" and click the "Next"
button. Follow the on-screen instructions.
This completes the installation of the
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 14) to check the
printer driver settings.
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 14) to check the
printer driver settings.
If the following screen appears while the
files are being copied (the message may
appear more than once), click the
"Continue Anyway" button.
files are being copied (the message may
appear more than once), click the
"Continue Anyway" button.
Caution
After the installation, a message
prompting you to restart your computer
may appear. In this case, click the
"Yes" button to restart your computer.
prompting you to restart your computer
may appear. In this case, click the
"Yes" button to restart your computer.
If a warning window appears
regarding the "Windows logo test", be
sure to click the "Continue Anyway"
button.
regarding the "Windows logo test", be
sure to click the "Continue Anyway"
button.
Note
Caution
!!install_ar230270.book 6 ページ 2006年12月25日 月曜日 午後2時38分
7
INSTALLING THE SOFTWARE
Installation in Windows 98/Me/2000 (USB cable)
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
computer's CD-ROM drive.
3
Double-click "My Computer" (
), and
then double-click the [CD-ROM] icon
(
(
).
4
Double-click the "Setup" icon (
).
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
6
Read the message in the "Welcome"
window and then click the "Next"
button.
window and then click the "Next"
button.
7
Click the "Custom" button.
8
Click the "Printer Driver" button.
Before installing the software, be sure to
click the [Display Readme] button and
view the detailed information on the
software.
9
Click the "Next" button.
The cable will be connected in step 16.
You can show the "SOFTWARE
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
Note
Note
!!install_ar230270.book 7 ページ 2006年12月25日 月曜日 午後2時38分
8
INSTALLING THE SOFTWARE
10
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next" button.
connected, select "Connected to this
computer" and click the "Next" button.
11
When the interface selection screen appears,
select "USB" and click the "Next" button.
select "USB" and click the "Next" button.
12
A confirmation window appears. Check the
contents and then click the "Next" button.
contents and then click the "Next" button.
13
Click the "Next" button.
In Windows 98/Me, click the "Yes" button.
Begin installation of the printer driver.
Begin installation of the printer driver.
14
When "The installation of the SHARP
software is complete" appears, click
the "OK" button.
software is complete" appears, click
the "OK" button.
15
Click the "Close" button.
A message will appear instructing you to
connect the machine to your computer.
Click the "OK" button.
connect the machine to your computer.
Click the "OK" button.
16
Make sure that the power of the
machine is turned on, and then
connect the USB cable. (page 13)
Windows will detect the machine and the
Plug and Play screen will appear.
machine is turned on, and then
connect the USB cable. (page 13)
Windows will detect the machine and the
Plug and Play screen will appear.
17
Follow the instructions in the Plug and
Play screen that appears in your
version of Windows to begin the
installation.
Play screen that appears in your
version of Windows to begin the
installation.
This completes the installation of the
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 14) to check the
printer driver settings.
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 14) to check the
printer driver settings.
In Windows 2000, if the following
screen appears while the files are
being copied (the message may
appear more than once), click the
"Yes" button.
screen appears while the files are
being copied (the message may
appear more than once), click the
"Yes" button.
Caution
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
Note
!!install_ar230270.book 8 ページ 2006年12月25日 月曜日 午後2時38分
Click on the first or last page to see other AR-M316 (serv.man15) service manuals if exist.