Sharp AR-M300 Service Manual ▷ View online
Parts marked with “
“ are important for maintaining the safety of the machine.
To maintain the safety and performance of the machine, use the replacement parts specified.
SHARP CORPORATION
LASER PRINTER
<For Europe>
<For Europe>
<For Europe>
<For Europe>
MODEL
AR-M300U/M300N
CODE : 00ZM300NEUA1E
[1] INTRODUCTION
This model is a modified version of the AR-M350U/M350N, providing a different printing speed.
This Service Manual, therefore, describes only the different points from the AR-M350U/M350N and supplementary items.
For items which are not described in this Service Manual, refer to the following Service Manuals and Parts Guides.
For items which are not described in this Service Manual, refer to the following Service Manuals and Parts Guides.
[2] LIST OF DIFFERENCES FROM AR-M350U/N
A.Product composition
•AR-M350/M450
Service Manual : 00ZARM350/A1E
Parts Guide : 00ZARM450/P1E
Circuit Diagram : 00ZARM350/C1/
•AR-P350/P450
Service Manual : 00ZARP350/A2E
Parts Guide : 00ZAR350LPP1/
Circuit Diagram : 00ZARP350/C1/
•AR-M350U/N•AR-M450U/N
Service Manual : 00ZARM350UA1E
•AR-NC5J
Service Manual : 00ZARNC5J/A1E
AR-M350U
AR-M300U
AR-M350N
AR-M300N
Remark
Base
specifications
specifications
Print speed
35PPM
31PPM
35PPM
31PPM
Engine speed
Network printer
function
function
Option
(AR-NC5J and AR-P14 are required.)
Standard
Hardware
Network board
Option
(AR-P14 is required.)
Standard
AR-NC5J
LSU
35PPM exclusive use 31PPM exclusive use 35PPM exclusive use 31PPM exclusive use
PCU
35PPM exclusive use 31PPM exclusive use 35PPM exclusive use 31PPM exclusive use
Controller PWB
STD controller
MFP controller
Consumable
parts
parts
OPC drum
Common use
Developer
Common use
Toner cartridge
Common use
CAUTION
Cautions on laser
Wave length
785 nm
+10 nm
−
15 nm
Pulse times
North America:
35 cpm model: (4.1 µs ± 4.1 ns)/7 mm
45 cpm model: (5.7 µs ± 5.7 ns)/7 mm
Europe:
35 cpm model: (3.8 µs ± 3.8 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
Output power
0.2 mW - 0.4 mW
At the production line, the output power of the scanner unit
is adjusted to 0.4 MILLIWATT PLUS 8 % and is maintained
constant by the operation of the Automatic Power Control (APC).
is adjusted to 0.4 MILLIWATT PLUS 8 % and is maintained
constant by the operation of the Automatic Power Control (APC).
Caution
This product contains a low power laser device. To ensure
safety do not remove any cover or attempt to gain access
to the inside of the product. Refer all servicing to qualified
personnel.
This product contains a low power laser device. To ensure
safety do not remove any cover or attempt to gain access
to the inside of the product. Refer all servicing to qualified
personnel.
CAUTION
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
AVOID EXPOSURE TO BEAM.
Laserstrahl
UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER
UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES.
UNNGÅ EKSPONERING FOR STRÅLEN.
UNNGÅ EKSPONERING FOR STRÅLEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNT
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
CLASS 1
LASER PRODUCT
LASER KLASSE 1
For Europe:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
WHEN OPEN INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
VORSICHT
UNSICHTBARE
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM
STRAHL AUSSETZEN.
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM
STRAHL AUSSETZEN.
ADVARSEL
USYNLIG LASERSTRÅLNING
VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER
UDE AF FUNKTION. UNDGÅ
UDSAETTELSE FOR
STRÅLNING.
VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER
UDE AF FUNKTION. UNDGÅ
UDSAETTELSE FOR
STRÅLNING.
VAROITUS!
LAITTEEN KÄYTTÄMINEN
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA
MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA
MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ
ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
For North America:
SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the
CDRH standards. This means that the equipment does not produce hazardous laser radiation. For
your safety, observe the precautions below.
CDRH standards. This means that the equipment does not produce hazardous laser radiation. For
your safety, observe the precautions below.
●
Do not remove the cabinet, operation panel or any other covers.
●
The equipment's exterior covers contain several safety interlock switches. Do not bypass any
safety interlock by inserting wedges or other items into switch slots.
safety interlock by inserting wedges or other items into switch slots.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
!
AR-M300N CONFIGURATION 3-1
[3] CONFIGURATION
1.System Configurations
2. Standard
Category
Model Name
Other options required for the installation/mounting.
(Options must be ordered separately.)
Remarks
MFP model (35ppm)
AR-M350
• B/W Scanner module/DSPF (AR-EF1)
• Scanner Rack(AR-RK1)
• Scanner Rack(AR-RK1)
• Stand/MPD&2000 sheet paper drawer (AR-D13) or
Three paper drawer stand (AR-D14) with
Power supply unit (AR-DC1) or
Power supply unit (AR-DC1) or
Stand/MPD & 2000 sheet paper drawer include the Power supply
unit (AR-D20) or
Stand/3 x 500 sheet paper drawer include the Power supply unit
Stand/3 x 500 sheet paper drawer include the Power supply unit
(AR-D15)
MFP model (45ppm)
AR-M450
MFP model (31ppm) (Without network printer function) AR-M300U
MFP model (35ppm) (Without network printer function) AR-M350U
MFP model (45ppm) (Without network printer function) AR-M450U
MFP model (31ppm) (With NIC card (standard))
AR-M300N
MFP model (35ppm) (With NIC card (standard))
AR-M350N
MFP model (45ppm) (With NIC card (standard))
AR-M450N
B/W scanner module/DSPF(AR-EF1)
Upper exit tray
extension
(AR-TE4)
Finisher
(AR-FN6)
Mail-bin stacker
(AR-MS1)
Stand/MPD & 2000 sheet paper drawer
(AR-D13)
(AR-D13)
Stand/3 x 500 sheet paper drawer
(AR-D14)
(AR-D14)
Stand/3 x 500 sheet paper drawer
with the power supply unit (AR-D15)
with the power supply unit (AR-D15)
Stand/MPD & 2000 sheet paper drawer
with the power supply unit (AR-D20)
with the power supply unit (AR-D20)
Saddle stitch
finisher
(AR-FN7)
finisher
(AR-FN7)
Duplex module
(AR-DU3)
Duplex
module/bypass
tray(AR-DU4)
module/bypass
tray(AR-DU4)
Exit tray
(AR-TE3 or AR-DU4 Standard)
(AR-TE3 or AR-DU4 Standard)
Power supply unit
(AR-DC1)
(AR-DC1)
!"#$%%&
AR-M300N CONFIGURATION 3-2
3. List of combination of peripheral devices
A. AR-M300U
As shown in the table below, some other peripheral devices ( B ) may be needed for installation of a peripheral device ( A ) and some peripheral devices
cannot be installed together.
cannot be installed together.
Related for scanner feature
Related for paper feed unit
B/W scanner module/DSPF
AR-EF1
AR-RK1
AR-D14
AR-D13
AR-D15
AR-D20
AR-DU4
AR-DU3
AR-FN7
AR-FN6
AR-MS1
AR-TE3
AR-TE4
AR-PN1
AR-PK1
AR-NS2
AR-FX5
AR-MM9
AR-DC1
AR-HD3
AR-M11
AR-NC5J
AR-P14
Scanner rack
Scanner r
a
c
k
Stand/3 x 500 sheet
paper drawer
paper drawer
Stand/MPD & 2000 sheet
paper drawer
paper drawer
Stand/3 x 500 sheet paper drawer
include Power suuply unit
include Power suuply unit
Stand/MPD & 2000 sheet paper drawer
include Power suuply unit
include Power suuply unit
Stand/3 x 500 sheet paper drawer
include Power suuply unit
Stand/MPD & 2000 sheet paper drawer
include Power suuply unit
Saddle stitch finisher
Finisher
Mail-bin stacker
Exit tray
Punch unit
PS3 expansion kit
Facsimile expansion kit
Pr
Network printer kit
int server card
Hard disk drive
Power supply unit
Duplex module/bypass tray
Duplex module
Stand/3 x 500 sheet paper dr
a
w
er
Stand/MPD & 2000 sheet
Duple
x module/b
ypass tr
a
y
Duple
x module
Upper exit tray extension
Multi-function controller
board
board
Fax memory (8 MB)
B/W scanner module/DSPF
Saddle stitch finisher
Finisher
Mail-bin stac
k
e
r
Exit tr
a
y
Punch unit
PS3 e
xpansion kit
F
acsimile e
xpansion kit
Pr
int ser
v
er card
Hard disk dr
Network printer kit
iv
e
P
o
w
er supply unit
Upper e
xit tr
a
y
e
xtension
Multi-function controller board
F
ax memor
y (8 MB)
Network scanner
expansion kit
expansion kit
Netw
or
k scanner e
xpansion kit
*
1
*
2
*
2
*
3
*
3
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
2
*
1
*
1
*
1
Output units
Related for extension of
functions and others
functions and others
= Must be installed together.
= Any of the units must be installed together.
= Must be installed for installation of the stand/3 x 500 sheet paper drawer or
the stand/MPD & 2000 sheet paper drawer.
the stand/MPD & 2000 sheet paper drawer.
= Cannot be installed together.
= Standard
= AR-DU4 Standard
= Attachment of the AR-P14 provides the similar functions.
= Standard
= AR-DU4 Standard
= Attachment of the AR-P14 provides the similar functions.
A
B
*4
*5
*6
*3
*4
*5
*4
*5
= Not Available
*6
' !"#$%%&