Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
4
Be sure to connect the power cord only to a power outlet that meets the specified voltage and
current requirements. Also make certain the outlet is properly grounded.
current requirements. Also make certain the outlet is properly grounded.
Be sure to allow the required space around the
machine for servicing and proper ventilation.
machine for servicing and proper ventilation.
CAUTIONS ON HANDLING THE MACHINE
Observe the following precautions when handling the machine to maintain top performance.
Do not drop the machine, subject it to shock or strike it against any object.
Store spare toner cartridges in a cool dry place without removing from the package before use.
Store spare toner cartridges in a cool dry place without removing from the package before use.
• If they are exposed to direct sunlight or excessive heat, poor copies may result.
Do not touch the photoconductive drum (green portion).
• Scratches or smudges on the drum will cause dirty copies.
LASER INFORMATION
Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
connected to the same outlet, the light may flicker.
Note
30cm (12")
30cm
(12")
30cm
(12")
A small amount of ozone is produced within the machine during operation.
The emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m
The emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m
3
) calculated as an 8 hr. time-
weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the
machine in a ventilated area.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the
machine in a ventilated area.
Wave length
785 nm
+10 nm
-15 nm
-15 nm
Pulse times
North America:
25 cpm model: (6.213 µs)/7 mm
31 cpm model: (7.385 µs)/7 mm
31 cpm model: (7.385 µs)/7 mm
Europe:
25 cpm model: (6.213 µs)/7 mm
31 cpm model: (7.385 µs)/7 mm
31 cpm model: (7.385 µs)/7 mm
Output power
Max. 0.9 mW
ar_m318_uk_cpy.book 4 ページ ２００７年１月１５日 月曜日 午前１１時３６分
5
ENVIRONMENTAL INFORMATION
USING THE MANUAL
This machine has been designed to provide convenient copying features in a minimum amount of office space and
with maximum operational ease. To get full use of all machine features, be sure to familiarise yourself with this
manual and the machine. For quick reference during machine use, keep this manual in a handy location.
with maximum operational ease. To get full use of all machine features, be sure to familiarise yourself with this
manual and the machine. For quick reference during machine use, keep this manual in a handy location.
ABOUT THE OPERATION MANUALS
The operation manuals for the machine are as follows:
Operation Manual for copier (this manual)
This manual contains explanations of the product and procedures for using the machine as a copier.
Online manual (for printer)
This manual is on the CD-ROM, and explains the procedures for using the machine as a printer, network printer, and
network scanner.
network scanner.
Software setup guide (for printer)
This manual contains instructions for installing the software that allows the machine to be used with your computer
and procedures for establishing initial printer settings.
and procedures for establishing initial printer settings.
Operation manual (for network scanner) (When the network scanner is
installed.)
installed.)
This manual contains explanations of the product and procedures for using the machine as a network scanner.
Key operator's guide
This explains key operator programs for machine management and copier related functions.
Key operator programs for the fax functions are explained in the operation manual for facsimile.
Key operator programs for the fax functions are explained in the operation manual for facsimile.
Products that have earned the ENERGY STAR
®
are designed to protect the environment
through superior energy efficiency.
ar_m318_uk_cpy.book 5 ページ ２００７年１月１５日 月曜日 午前１１時３６分
6
THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE
INDICATIONS
INDICATIONS
An "R" appearing at the end of an original or paper size (A4R, A5R, 5-1/2" x 8-1/2"R, 8-1/2" x 11"R, etc.) indicates that
the original or paper is oriented horizontally as shown below.
the original or paper is oriented horizontally as shown below.
Sizes that can be placed only in the horizontal (landscape) orientation (B4, A3, 8-1/2" x 14", 11" x 17"), do not
contain the "R" in their size indication.
contain the "R" in their size indication.
CONVENTIONS USED IN THIS MANUAL
Explanation of words and illustration
• This operation manual refers to the Reversing Single Pass Feeder as the "RSPF".
• The illustrations in this manual show the AR-M256/AR-M316 with the optional
• The illustrations in this manual show the AR-M256/AR-M316 with the optional
reversing single pass feeder (AR-RP7) and the optional job separator tray kit
(AR-TR3) installed.
The appearance of your machine may be different depending on the model and
options installed, however, the basic operations are the same.
(AR-TR3) installed.
The appearance of your machine may be different depending on the model and
options installed, however, the basic operations are the same.
• For peripheral devices that can be installed, see "PERIPHERAL DEVICES"
(p.77).
• The peripheral devices are generally optional, however, some models include
certain peripheral devices as standard equipment.
• Some functions cannot be used on certain models.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
For example:
Page 15................................A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Page 81................................25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400%
For example:
Page 15................................A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Page 81................................25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400%
(25%, 50%, 64%, 77%, 100%, 121%, 129%, 200%, 400%)
Although AB series size indications are shown on the operation panel of this manual, inch series indications are
displayed on the inch series machines.
displayed on the inch series machines.
Warns that injury may result if the contents of the warning are not properly followed.
Cautions that damage to the machine or one of its components may result if the contents of the
caution are not properly followed.
caution are not properly followed.
Notes provide useful information on the specifications, functions, performance, and operation of
the machine.
the machine.
<Horizontal (Landscape) orientation>
Warning
Caution
Note
OUTPUT
2-SIDED COPY
SPECIAL MODES
READY TO COPY.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
COPY RATIO
A4
0
A4
A3
OUTPUT
2-SIDED COPY
SPECIAL MODES
READY TO COPY.
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
COPY RATIO
8½x11
0
8½x11
8½x14
[AB series]
[Inch series]
RSPF
ar_m318_uk_cpy.book 6 ページ ２００７年１月１５日 月曜日 午前１１時３６分
7
MAIN FEATURES
High-speed laser copying
• First-copy time* is only 4.8 seconds.
• Copying speed is 25 copies/min. (AR-M256) or 31 copies/min. (AR-M316) This is ideal for business use and
• Copying speed is 25 copies/min. (AR-M256) or 31 copies/min. (AR-M316) This is ideal for business use and
provides a big boost to workplace productivity.
* First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
High-quality digital image
• In addition to automatic exposure adjustment, three original type modes are available: "TEXT mode" for text-only
originals, "TEXT/PHOTO mode" for mixed text and photo originals, and "PHOTO mode" for photos. The exposure
can be manually adjusted to 5 levels in each mode.
can be manually adjusted to 5 levels in each mode.
Enhanced copying features
• Zoom copies can be made from 25% to 400% in increments of 1%.
• Continuous copying of up to 999 copies is possible.
• Automatic two-sided copying can be performed.
• Useful special features such as erase, margin shift, 2 in 1 and 4 in 1, pamphlet copy, dual page copy and cover
• Continuous copying of up to 999 copies is possible.
• Automatic two-sided copying can be performed.
• Useful special features such as erase, margin shift, 2 in 1 and 4 in 1, pamphlet copy, dual page copy and cover
copy are available.
• Key operator programs allow the setting or modification of functions to meet your specific needs. The key operator
programs can also be used to enable audit mode, which allows the machine administrator to control use of the
machine.
machine.
Black and white LCD touch panel makes it easy to operate the machine
• Employing a backlit black and white LCD display, the touch panel provides step-by-step guidance for each function
of the machine. The touch panel even provides instructions for removing paper misfeeds and other problems that
occur.
occur.
Environment and people friendly design
• Preheat and auto power shut-off modes are provided to reduce power consumption when the machine is not in
use.
• A universal design has been implemented in the product whereby the height of the operation panel and shape of
the keys are designed to be usable by as many people as possible.
Erase copy
Margin shift copy
2in1 copy
4in1 copy
A
A
A
A
Dual page copy
Pamphlet copy
3
4
SHARP
1
2
Cover copy
Card shot
ar_m318_uk_cpy.book 7 ページ ２００７年１月１５日 月曜日 午前１１時３６分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.