DOWNLOAD Sharp AR-M155 (serv.man3) Service Manual ↓ Size: 9.09 MB | Pages: 127 in PDF or view online for FREE

Model
AR-M155 (serv.man3)
Pages
127
Size
9.09 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual
File
ar-m155-sm3.pdf
Date

Sharp AR-M155 (serv.man3) Service Manual ▷ View online

CONTENTS
Parts marked with “
” are important for maintaining the safety of the machine. Be sure to replace these parts
with the replacement parts specified to maintain the safety and performance of the machine.
SHARP CORPORATION
SERVICE MANUAL
CODE : 00ZARM155/A1E
DIGITAL MULTIFUNCTIONAL 
SYSTEM
AR-M150
AR-M155
MODEL
AR-M155X
(AR-M155)
[ 1 ]  GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[ 2 ]  SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[ 3 ]  CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[ 4 ]  EXTERNAL VIEWS AND INTERNAL STRUCTURES  . . . . . . . . . 4 - 1
[ 5 ]  UNPACKING AND INSTALLATION  . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
[ 6 ]  COPY PROCESS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[ 7 ]  OPERATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[ 8 ]  DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
[ 9 ]  ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
[10] TEST COMMAND, TROUBLE CODES. . . . . . . . . . . . . . . . . . . . 10 - 1
[11]  MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
[12]  USER PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1
[13]  ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1
[14]  CIRCUIT DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1
[15]  FIRMWARE DOWNLOAD PROCEDURES. . . . . . . . . . . . . . . . . 15 - 1
 CAUTION  
This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved
on the eye’s retina, there is the danger of spot damage to the retina.
The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of
servicing.
1)
When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a
unit, not as individual parts.
2)
Do not look into the machine with the main switch turned on after removing the developer unit, toner
cartridge, and drum cartridge.
3)
Do not look into the laser beam exposure slit of the laser optical unit with the connector connected
when removing and installing the optical system.
4)
The middle frame contains the safety interlock switch.
Do not defeat the safety interlock by inserting wedges or other items into the switch slot.
LASER WAVE – LENGTH :  770 
– 795nm
Pulse times : 1
0.24µsec
Out put power : 0.15mW 
± 0.01mW
 
CAUTION
INVISIBLE LASER RADIATION,
WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
VORSICHT
UNSICHTBARE LASERSTRAHLUNG,
WENN ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM STRAHL AUSSETZEN.
VARO !
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE ÄLÄ
KATSO SÄTEESEEN.
ADVARSEL
USYNLIG LASERSTRÅLNING VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER UDE AF
FUNKTION. UNDGÅ UDSAETTELSE FOR
STRÅLNING.
VARNING !
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN. – STRÅLEN ÄR
FARLIG.
This product is a class 1 laser product that complies with 21CFR 1040 of the CDRH standard and 
IEC825. This means that this machine does not produce hazardous laser radiation. The use of controls, 
adjustments or performance of procedures other than those specified herein may result in hazardous 
radiation exposure.
At the production line, the output power
of the scanner unit is adjusted to 0.57
MILLI-WATT PLUS 20 PCTS and is
maintained constant by the operation of
the Automatic Power Control (APC).
Even if the APC circuit fails in operation
for some reason, the maximum output
power will only be 15 MILLI-WATT 0.1
MICRO-SEC. Giving and accessible
emission level of 42 MICRO-WATT
which is still-less than the limit of
CLASS-1 laser product.
The foregoing is applicable only to the 220V
model, 230V model and 240V model.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA
KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT
SÄTT ÄN I DENNA BRUKSANVISNING
SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS
FÖR OSYNLIG LASERSTRÅLNING, SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
Caution
This product contains a low power laser
device. To ensure continued safety do not
remove any cover or attempt to gain access
to the inside of the product. Refer all
servicing to qualified personnel.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CONTENTS
[1] GENERAL
1. Major functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
2. Note for servicing and handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[2] SPECIFICATIONS
1. Basic Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
2. Operation specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
3. Copy performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2
4. SPLC printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-3
5. Scan function  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-3
[3] CONSUMABLE PARTS
1. Supply list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
2. Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
3. Production control number (lot No.) identification . . . . . . . . . . . . . . . .  3-1
4. Toner cartridge replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
2. Internal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
3. Operation panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2
4. Motors and solenoids  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3
5. Sensors and switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
6. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5
7. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6
[5] UNPACKING AND INSTALLATION
1. Copier installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
2. Cautions on handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
3. Checking packed components and accessories . . . . . . . . . . . . . . . . .  5-1
4. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2
5. Removing protective packing materials  . . . . . . . . . . . . . . . . . . . . . . .  5-2
6. Developer unit installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2
7. Toner cartridge installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-3
8. Loading the paper tray  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-4
9. Power to copier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-4
10. Software for AR-M150/M155/M155X  . . . . . . . . . . . . . . . . . . . . . . . . .  5-4
A. Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-5
B. Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-5
C. Setting up button manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-10
D. Connecting the machine to your computer . . . . . . . . . . . . . . . . .  5-11
11. Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-12
A. USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-12
B. Parallel interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-12
12. Moving  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-12
[6] COPY PROCESS
1. Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1
2. Outline of print process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-2
3. Actual print process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-2
[7] OPERATIONAL DESCRIPTIONS
1. Outline of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1
2. Scanner section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-2
A. Scanner unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-2
B. Optical system  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-2
C. Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-2
3. Laser unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
A. Basic structure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
B. Laser beam path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
C. Composition  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
4. Fuser section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
A. General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-4
5. Paper feed section and paper transport section . . . . . . . . . . . . . . . . .  7-4
A. Paper transport path and general operations . . . . . . . . . . . . . . . .  7-4
6. D-D (Duplex to Duplex) mode paper/document transport 
(Duplex model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7
A. Initial state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7
B. Front copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7
C. Back copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7
7. Shifter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-8
[8] DISASSEMBLY AND ASSEMBLY
1. High voltage section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
A. List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
B. Drum replacement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
C. Disassembly procedure (Transfer charger unit) . . . . . . . . . . . . . .  8-3
D. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-3
E. Charger wire cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-3
F. Charger wire replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4
2. Operation panel section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4
A. List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4
B. Disassembly procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5
3. Optical section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5
A. List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5
B. Disassembly procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-6
4. Fusing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-7
A. List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-7
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-7
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9
5. Tray paper feed/transport section . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-14
6. Manual paper feed section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-15
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-15
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-15
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-16
D. Pressure plate holder attachment . . . . . . . . . . . . . . . . . . . . . . . .  8-16
7. Rear frame section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-17
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-17
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-17
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-17
8. Power section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
9. Duplex motor section (Duplex model only)  . . . . . . . . . . . . . . . . . . . .  8-18
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
10. Reverse roller section (Duplex model only). . . . . . . . . . . . . . . . . . . .  8-18
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-18
[9] ADJUSTMENTS
1. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
A. Copy magnification ratio adjustment . . . . . . . . . . . . . . . . . . . . . . .  9-1
B. Image position adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-2
2. Copy density adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-3
A. Copy density adjustment timing  . . . . . . . . . . . . . . . . . . . . . . . . . .  9-3
B. Note for copy density adjustment  . . . . . . . . . . . . . . . . . . . . . . . . .  9-3
C. Necessary tool for copy density adjustment  . . . . . . . . . . . . . . . . .  9-4
D. Features of copy density adjustment. . . . . . . . . . . . . . . . . . . . . . .  9-4
E. Copy density adjustment procedure  . . . . . . . . . . . . . . . . . . . . . . .  9-4
3. High voltage adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5
A. Main charger (Grid bias) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5
B. DV bias check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5
4. Duplex adjustment (With optional RSPF installed)  . . . . . . . . . . . . . . .  9-5
A. Adjusting the paper reverse position in memory for 
duplex copying  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5
B. Adjusting trailing edge void in duplex copy mode . . . . . . . . . . . . .  9-6
5. SPF (RSPF) scan position automatic adjustment 
(With optional SPF/RSPF installed). . . . . . . . . . . . . . . . . . . . . . . . . . .  9-7
6. RSPF (SPF) mode sub scanning direction magnification 
ratio adjustment (With optional SPF/RSPF installed)  . . . . . . . . . . . . .  9-7
7. Automatic black level correction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-8
[10] TEST COMMAND, TROUBLE CODES
1. Entering the test command mode . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
2. Key rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
3. List of test commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
4. Descriptions of various test commands . . . . . . . . . . . . . . . . . . . . . . .  10-3
5. Trouble codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-39
A. Trouble codes list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-39
B. Details of trouble codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-39
[11] MAINTENANCE
1. Maintenance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-1
2. Maintenance display system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-1
3. Remaining toner indication  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-1
[12] USER PROGRAM
1. User programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-1
A. Copy mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-1
B. Print mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
2. Selecting a setting for a user program. . . . . . . . . . . . . . . . . . . . . . . .  12-3
[13] ELECTRICAL SECTION
1. Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-1
A. Overall block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-1
2. Circuit descriptions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-2
A. Main PWB (MCU)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-2
B. DC power circuit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-11
[14] CIRCUIT DIAGRAM
1. MCU PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14-1
2. OPERATION PWB  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14-26
3. POWER SUPPLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14-29
4. ACTUAL WIRING DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14-33
[15] FIRMWARE DOWNLOAD PROCEDURES
1. Initial setting (Serial number setting procedures)  . . . . . . . . . . . . . . .  15-1
2. Download procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15-1
3. Version acquisition procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15-3
4. EEPROM data acquisition procedure  . . . . . . . . . . . . . . . . . . . . . . . .  15-4
5. Installing procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15-5
Page of 127
Display

Sharp AR-M155 (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sharp AR-M155 (serv.man3) Service Manual ↓ Size: 9.09 MB | Pages: 127 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AR-M155 (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-M155 (serv.man3) Copying Equipment. Information contained in Sharp AR-M155 (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.