Sharp AR-M150 (serv.man6) User Manual / Operation Manual ▷ View online
PREPARATIONS
11
1
[ZOOM] key
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[ZOOM] key and select the desired
preset ratio. To select a ratio that is not
preset, press the [ZOOM] key, select the
preset ratio that is closest to the desired
ratio, and then press the [
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[ZOOM] key and select the desired
preset ratio. To select a ratio that is not
preset, press the [ZOOM] key, select the
preset ratio that is closest to the desired
ratio, and then press the [
] key (
)
or
[
] key (
) to increase or
decrease the ratio in increments of 1%.
[START] key (
[START] key (
) / Ready indicator
The ready indicator lights up when
copying or scanning is possible.
To begin copying, press the [START]
key (
copying or scanning is possible.
To begin copying, press the [START]
key (
).
The [START] key (
) is also pressed
to return to normal operation from auto
power shut-off mode.
[CLEAR ALL] key (
power shut-off mode.
[CLEAR ALL] key (
)
This returns all functions to the default
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
Shows the current copy ratio.
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
A checkmark "
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
A checkmark "
" appears when the
exposure has been changed, or when
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
15
15
15
16
16
16
17
17
17
18
19
20
21
READY TO COPY.
100% A4 0
100% A4 0
Display
16 17
18
19
20
21
3
4
5
12
POWER ON AND OFF
The power switch is located on the left side of the machine.
Power on
Turn the power switch to the "ON" position.
The ready indicator will light up and other
indicators which show the initial settings of the
display will also light up to indicate the ready
condition. For the initial settings, see the
"Initial settings" (below).
indicators which show the initial settings of the
display will also light up to indicate the ready
condition. For the initial settings, see the
"Initial settings" (below).
You can select copy settings and press the [START] key (
) during warm-up.
Copying will start after warm-up.
Language setting
The first time the power is turned on after shipment from the factory, a message will
appear in English in the display prompting you to select the language. Select the
language with the [
appear in English in the display prompting you to select the language. Select the
language with the [
] key (
) or [
] key (
) and then press the [OK] key. The
language can also be changed in the user programs (p.65).
Initial settings
The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (
ALL] key (
) is pressed,
or when no keys are pressed for the preset "AUTO
CLEAR" time following the end of a copy job.
When the machine reverts to the initial
settings, all settings and functions selected to that point are cancelled. The "AUTO
CLEAR" can be changed in the user programs. (p.62)
CLEAR" can be changed in the user programs. (p.62)
If you use the machine in a country other than the country
where the machine was purchased, you will need to make sure
that your local power supply is compatible with your model. If
you plug the machine into an incompatible power supply,
irreparable damage to the machine will result.
where the machine was purchased, you will need to make sure
that your local power supply is compatible with your model. If
you plug the machine into an incompatible power supply,
irreparable damage to the machine will result.
Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.
Do not use extension cords or power strips.
Copy ratio:
100%, Exposure: Automatic
Copy quantity:
0, All special copier modes: Off
Caution
Caution
AR-M155
FAX
1,2,3,
1,2,3,
SP. FUNC
ZOOM
MENU
OK
The main screen of copy mode appears.
READY TO COPY.
100% A4 0
100% A4 0
When in the copy mode
PREPARATIONS
13
1
About the scan head
The scan head lamp remains on constantly when the machine is in the ready
condition (when the ready indicator is illuminated).
The machine adjusts the scan head lamp periodically to maintain copying quality. At
this time, the scan head moves automatically. This is normal and does not indicate
machine trouble.
condition (when the ready indicator is illuminated).
The machine adjusts the scan head lamp periodically to maintain copying quality. At
this time, the scan head moves automatically. This is normal and does not indicate
machine trouble.
Power off
Make sure that the machine is not in operation and then turn the power
switch to the "OFF" position.
switch to the "OFF" position.
If the power switch is turned off while the machine is
in operation, a misfeed may occur and the job that
was in progress will be cancelled.
In cases where the machine will not be used for a
long time, turn off the power switch and remove the
power cord from the outlet.
in operation, a misfeed may occur and the job that
was in progress will be cancelled.
In cases where the machine will not be used for a
long time, turn off the power switch and remove the
power cord from the outlet.
Check the following to make sure the machine is not in operation:
• The ready indicator is lit. (Initial state)
• The power save indicator is lit. (preheat mode or auto shut-off mode)
• The ready indicator is lit. (Initial state)
• The power save indicator is lit. (preheat mode or auto shut-off mode)
Power save modes
Preheat mode
This function automatically switches the machine to a low power consumption state if
the set duration of time elapses without the machine being used when the power is
on. In this mode, the power save indicator lights up. Normal operation automatically
resumes when a key on the operation panel is pressed, an original is placed, a print
job is received.
the set duration of time elapses without the machine being used when the power is
on. In this mode, the power save indicator lights up. Normal operation automatically
resumes when a key on the operation panel is pressed, an original is placed, a print
job is received.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less
power than preheat mode if the set duration of time elapses without the machine being
used when the power is on. The power save indicator lights up, the display shows a
message indicating that the machine is in auto power shut-off mode. To resume normal
operation, press the [START] key (
power than preheat mode if the set duration of time elapses without the machine being
used when the power is on. The power save indicator lights up, the display shows a
message indicating that the machine is in auto power shut-off mode. To resume normal
operation, press the [START] key (
). Normal operation also resumes automatically
when a print job is received or scanning is begun from a computer. While in auto power
shut-off mode, no keys (except the [START] key (
shut-off mode, no keys (except the [START] key (
)) can be used.
The machine has two power save modes to reduce overall power
consumption and thereby reduce the cost of operation. In addition,
these modes conserve natural resources and help reduce
environmental pollution. The two power save modes are preheat
mode and auto power shut-off mode.
consumption and thereby reduce the cost of operation. In addition,
these modes conserve natural resources and help reduce
environmental pollution. The two power save modes are preheat
mode and auto power shut-off mode.
The preheat activation time and the auto power shut-off time can be
changed with "PREHEAT MODE" and "AUTO SHUT-OFF TIME" in the
user programs. It is suggested that you set times that are appropriate
for your usage of the machine. (p.62, p.63)
changed with "PREHEAT MODE" and "AUTO SHUT-OFF TIME" in the
user programs. It is suggested that you set times that are appropriate
for your usage of the machine. (p.62, p.63)
Note
14
2
Chapter 2
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not installed or is improperly installed.
tray, or when the selected paper tray is not installed or is improperly installed.
PAPER
For best results, use only SHARP recommended paper.
*
1
The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
the paper.
*
2
Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*
3
When loading paper larger than A4 (8-1/2" x 11") size, do not use paper of weight
greater than 105
greater than 105
g/m
2
(28 lbs.).
Paper tray
type
Paper type
Size
Weight
Capacity
Paper tray
Standard paper
Recycled paper
Recycled paper
A5
B5
A4
8-1/2" x 11"
8-1/2" x 13"
8-1/2" x 14"
B5
A4
8-1/2" x 11"
8-1/2" x 13"
8-1/2" x 14"
56
g/m
2
to
80
g/m
2
(15 lbs. to 21 lbs.)
250 sheets *
1
(The paper
should not
exceed the
line on the
tray)
should not
exceed the
line on the
tray)
Bypass tray Standard paper
Recycled paper
A6 to A4
(3-1/2" x 5-1/2" to
8-1/2" x 14")
(3-1/2" x 5-1/2" to
8-1/2" x 14")
56
g/m
2
to
80
g/m
2
(15 lbs. to 21 lbs.)
50 sheets *
1
Thick paper
52
g/m
2
to
128
g/m
2
(14 lbs. to 34.5
lbs.)*
lbs.)*
3
Load one
sheet at a
time in the
bypass tray.
sheet at a
time in the
bypass tray.
Transparency
film/Labels
film/Labels
Envelopes *
2
International DL
International C5
Monarch
Commercial 9
Commercial 10
International C5
Monarch
Commercial 9
Commercial 10
LOADING PAPER
Click on the first or last page to see other AR-M150 (serv.man6) service manuals if exist.