Sharp AR-LC9 Service Manual ▷ View online
AR-LC9 DISASSEMBLY, ASSEMBLY, MAINTENANCE 6 - 2
3. Each unit removal
A. Paper feed unit
1) Pull out the tray.
2) Open the upper cover, and remove three screws.
3) Remove the upper cabinet.
4) Disconnect the connectors (2 positions).
5) Remove the screw, and remove the paper feed unit.
B. Paper feed tray
1) Pull out the tray.
2) Remove the screws from the left and right rail sections.
3) Remove the tray unit from the rail.
C. Drive unit
1) Remove the screw, and remove the rear cover.
2) Remove the connectors (2 positions).
AR-LC9 DISASSEMBLY, ASSEMBLY, MAINTENANCE 6 - 3
3) Remove the screw, and remove the drive unit.
4. Major parts removal
A. Motor (Main)
1) Remove the screw, and remove the rear cover.
2) Disconnect the connector.
3) Remove the screw, and remove the motor.
B. Lift motor
1) Remove the drive unit.
2) Remove the E-ring, and remove the parts.
3) Remove the screw, and remove the cover.
4) Remove the screw, and remove the lift motor.
5) Remove the ring, and remove the pulley.
C. Clutch
1) Remove the paper feed unit. (Refer to "3. Each unit removal.")
2) Remove the screw, and remove the cover.
3) Remove the E-ring, and remove the parts.
AR-LC9 DISASSEMBLY, ASSEMBLY, MAINTENANCE 6 - 4
4) Disconnect the connector, and remove the screw.
5) Remove the frame.
6) Remove the connector, and the E-ring, and remove the paper
feed transport clutch.
D. Paper feed solenoid
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the screw, and remove the unit.
4) Disconnect the connector.
5) Remove the screw, and remove the solenoid.
E. Torque limiter
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the E-ring and the screw, and remove the parts.
4) Lift the shaft, and remove the torque limiter.
AR-LC9 DISASSEMBLY, ASSEMBLY, MAINTENANCE 6 - 5
F. Transport roller
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the spring, and remove the screw.
4) Remove the plate cover, and remove the lever.
5) Remove the clutch.
6) Remove the screw and the E-ring, and remove the parts.
7) Remove the transport roller.
Click on the first or last page to see other AR-LC9 service manuals if exist.