Sharp AR-FX7 Service Manual ▷ View online
AR-FX7 SPECIFICATIONS 2 - 1
[2] SPECIFICATIONS
1.
Communication system
(1) Electronic transmission system
2.
Scanning system
(1) Document size
(2) Transmission mode document load quantity scan
cycle (RSPF capacity)
3.
Image process system
(1) Half-tone reproduction density adjustment
(2) Image selection
(3) Print resolution
4.
Print system
(1) Recording size
(2) Recording paper
5.
Transmission function system
(1) Simplified dialing function
(2) F-code communication
(3) Time specification
(4) Recall mode
(5) Automatic reduction transmission
Transmission time
Less than 3 sec (Super G3/33600bps)
Approx. 6 sec (G3 ECM/14400bps)
Approx. 6 sec (G3 ECM/14400bps)
Compression system
MH, MR, MMR, JBIG
Modem speed
33600bps
→
2400bps auto fall back
Mutual
communication
communication
Super G3/G3
Employed line
Public Switched Telephone Network
(PSTN), Private Branch Exchange (PBX)
(PSTN), Private Branch Exchange (PBX)
R-key operation when
setting PBX
setting PBX
YES (Germany only)
Number of employed
lines
lines
One line
ECM
YES
Max. document
width
width
297mm (11.7")
Unscanable area
Lead edge 5mm or less, rear edge 5mm or less
left & right edges 6mm or less
left & right edges 6mm or less
Auto
detection
size
detection
size
OC
AB series
A3/B4/A4/A4R/A5
Inch series
11 x 17/8.5 x 14/8.5 x 11/8.5 x
11R/5.5 x 8.5
11R/5.5 x 8.5
RSPF
AB series
A3/B4/A4/A4R/A5/A5R
Inch series
11 x 17/8.5 x 14/8.5 x 11/
8.5 x 11R/5.5 x 8.5/5.5 x 8.5R
8.5 x 11R/5.5 x 8.5/5.5 x 8.5R
Document size
specified
specified
AB series
A3/B4/A4/A4R/B5/B5R/A5/A5R
Inch series
8.5 x 11/8.5 x 11R
Duplex document
specified
specified
YES
Long document
Max. 1000mm
(A3 width 297mm/except when ultra fine)
(A3 width 297mm/except when ultra fine)
RSPF/OC
transmission select
transmission select
NO (Selection inhibited during scanning of a
document)
document)
Continuous auto
paper feed
paper feed
YES
Document load
capacity
capacity
RSPF: 100 sheets
Document scan cycle
40 pages/min (Normal, A4R memory
transmission)
transmission)
Document scan
speed
speed
About 1.5sec/page (Normal, A4R memory
transmission)
transmission)
Job build (Large
document mode)
document mode)
YES
Slow scan mode
YES
Half-tone
Equivalent to 256 gradations (Combination
of fine/super fine/ultra fine is possible.)
of fine/super fine/ultra fine is possible.)
Exposure selection
Auto/manual in 5 steps
Standard
8dot/mm x 3.85line/mm
Fine
8dot/mm x 7.7line/mm
Super fine
8dot/mm x 15.4line/mm
Ultra fine
16dot/mm x 15.4line/mm: ITU-T conforming
600dpi (with resolution correction)
Max. record width
293mm (11.5")
Recording paper size
detection
detection
YES (All sizes except paper from multi
bypass tray.
bypass tray.
→
Recognition of the set size.
The tray has no function to detect the actual
paper size.)
paper size.)
Recording paper size
AB series
A3/B4/A4/A4R/B5/B5R/A5/
8.5 x 11/8.5 x 11R
8.5 x 11/8.5 x 11R
Inch series
11 x 17/8.5 x 14/8.5 x 11/
8.5 x 11R/5.5 x 8.5/A4/A4R
8.5 x 11R/5.5 x 8.5/A4/A4R
Recording paper
empty detection
empty detection
YES
Paper feed
All installed trays except for multi-bypass
tray.
tray.
Reception paper full
detection
detection
YES
Rapid key dialing/
Group dialing
registration per
Group dialing
registration per
500 numbers (Total volume of rapid key and
group dialing)
group dialing)
Chain dialing
YES
Redialing
The preceding number in single address
transmission is registered. (except time
specification)
Not cleared even by clear all key
transmission is registered. (except time
specification)
Not cleared even by clear all key
Mode recall
NO
Sub address
YES (Max. 20 digits)
Password
YES (Max. 20 digits)
Time specification:
Transmission/polling
Transmission/polling
Time is specified in transmission/polling.
Call time in memory
send
send
30sec / 45sec / 60 sec
Default: 45 sec
Default: 45 sec
Auto recall mode
when other party
is busy.
when other party
is busy.
Interval
1min to 15min, default 3min
Number of
times
times
1 to 10 times / No resend
Default 2 times
Default 2 times
Recall mode
when in a
communication
error
when in a
communication
error
Interval
1min to 15min / 0: Resend
immediately after disconnection of
the line
Default: 1 min
immediately after disconnection of
the line
Default: 1 min
Number of
times
times
1 to 5 times / No resend
Default: Once
Default: Once
Send page
Page with which the error occurred
Number of transmissions
counted in recall mode
simultaneously.
counted in recall mode
simultaneously.
Max. 50 items
Subsequent transmission
reservation override in recall
mode
reservation override in recall
mode
NO
YES (ON/OFF by key operator program)
AR-FX7 SPECIFICATIONS 2 - 2
(6) Memory transmission/direct transmission
(7) Broadcast function
(8) Scan specification
(9) Priority function
(10) Multiple message transmission
(11) Rotation transmission
(12) Book document transmission
(13) Finish stamp
(14) Bulletin board (remote transmission, polling
transmission functions)
6.
Reception function system
(1) Reception mode
(2) Zoom reception
(3) Memory reception function
(4) Received data skip output
(5) Transfer
(6) Specified number reception
Memory transmission
YES
Number of reservation
to be set
to be set
Max. 50 items
Process in memory full
Transmission cancel or only
scanned data transmission
scanned data transmission
Quick online transmission
YES (Enable/Disable setup by key
operator program)
operator program)
Direct transmission
YES (100 pages from RSPF, only 1
page from OC)
page from OC)
Default setup
Set by key operator program
Broadcast
transmission
transmission
Number of
destinations
destinations
200 destinations (When group
dialing is used, the number of
other parties registered to group
dialing is added.)
dialing is used, the number of
other parties registered to group
dialing is added.)
Transmission
method
method
10-key, rapid key dialing, group
key, next address key
key, next address key
Usable dial
10-key entry, rapid key dialing,
group key dialing.
However, an address including
sub address of 10-key entry
registered cannot be used.
group key dialing.
However, an address including
sub address of 10-key entry
registered cannot be used.
Group dialing
Transmitted by group dialing
registered to rapid key dialing
registered to rapid key dialing
Relay
broadcast
transmission
broadcast
transmission
Instructing
station
station
Only from the machine having
Sharp relay broadcast
instructing transmission function
Sharp relay broadcast
instructing transmission function
Relay station
Only from the machine having
Sharp relay broadcast
transmission function
Sharp relay broadcast
transmission function
Multi-stage relay
NO
Number of relay
groups
groups
10 groups
F code relay broadcast
instruction (relay broadcast
instruction function)
instruction (relay broadcast
instruction function)
YES
F code relay broadcast (relay
function)
function)
YES
Confidential transmission (Sharp
machine mode) (Other party)
machine mode) (Other party)
Only Sharp machine having
confidential function
confidential function
Confidential transmission (F code
communication) (Other party)
communication) (Other party)
F code support machine
Page division
YES (Allowed only from OC)
Applicable size: A3/B4/A4R
Applicable size: A3/B4/A4R
Page linkage
NO
Transmission reservation interrupt
YES (check by job status key)
Broadcast interrupt
YES (by direct transmission)
Multiple message transmission
NO
Paper size
A4
→
A4R, A5R
→
A5,
8.5 x 11
→
8.5 x 11R
Transmission method
By OC mode
NO
Bulletin board
(remote
transmission)
(remote
transmission)
YES
Polling protection
function
function
Check by other party’s number
YES
Check by matching of system number
(user’s own machine), ID number
(other party’s machine) (between
Sharp machines only)
(user’s own machine), ID number
(other party’s machine) (between
Sharp machines only)
YES
F code bulletin
board
board
YES
F code bulletin
board box
board box
Registered up to 10 boxes
F code bulletin
board box name
board box name
Registered up to 36 letters (18 letters are
displayed)
displayed)
Default setup
Automatic reception (Reception
state switchable)
state switchable)
Automatic
reception
reception
Automatic
reception setup
reception setup
YES
Number of calls
0 to 9 times (Factory default 2
times)
times)
Non-call reception
Allowed by setting the number of
calls to 0.
calls to 0.
Manual reception setup
YES
Setup for switching to automatic
reception
reception
0 to 9 times (Factory setup 0
time) (France only)
time) (France only)
Auto reduction setup in letter
reception
reception
NO
Auto reduction setup in A3
reception (A3 RX REDUCE)
reception (A3 RX REDUCE)
NO
Answering machine connection
NO
Reception mode time switch
NO
Reception data print condition
setup
setup
Set whether the received data
are reduced or divided to print,
by the key operator program.
are reduced or divided to print,
by the key operator program.
Auto reduction print on the
paper size
paper size
YES (ON/OFF by key operator
program)
program)
Memory delayed receiving
Only when output is disabled.
Forced memory receiving
NO
YES
Transfer destination
registration
registration
YES (Registered by key operator
program)
program)
Transfer procedure
YES (Operated by function menu)
Only designated number
receiving enabled.
receiving enabled.
NO
Reception reject setup
(ANTI JUNK FAX)
(ANTI JUNK FAX)
YES (ON/OFF by key operator
program)
program)
Registration of the
numbers to be rejected
numbers to be rejected
50 items (up to 20 digits each)
Registered by key operation program.
Registered by key operation program.
AR-FX7 SPECIFICATIONS 2 - 3
(7) Confidential function
(8) Rotation reception
(9) Division reception
(10) Duplex reception
(11) 2 in 1 reception
(12) Polling
(13) Turn around transmission
7.
Registration system
(1) Number registration
(2) Sender registration
(3) Polling (Registration of allow number)
(4) Letter input
(5) Registered data read/write
(6) Date/time adjustment
(7) Backup
8.
Telephone function system
Confidential reception (Sharp
machine mode) (Sender)
machine mode) (Sender)
Sharp machine having confidential
function only
function only
Confidential box
Registered up to 10 boxes
Confidential box name
Registered up to 36 letters (18
letters displayed)
letters displayed)
Confidential ID code
Set per confidential box
Confidential (F code
communication) (Sender)
communication) (Sender)
F code support machine
F code confidential box
Registered up to 10 boxes
F code confidential box name
Registered up to 36 letters (18
letters displayed)
letters displayed)
F code confidential box print
pass code
pass code
YES (4 digits)
Paper is outputted by rotating 90 degrees to the set direction of
paper in cassette
paper in cassette
Division size
When a long original is received, machine
outputs the data according to the condition set
through key operator program.
outputs the data according to the condition set
through key operator program.
YES
NO
Send request
YES
Resolution
Ultra Fine (Change by the soft SW)
NO
Rapid
dialing
dialing
Number of items
(Include group)
(Include group)
500 items
Number of digits
of other party’s
number
of other party’s
number
50 digits (+ Sub address 20 digits,
pass code 20 digits)
pass code 20 digits)
User tag
classification
classification
YES
International
communication
mode setup
communication
mode setup
YES
Transmission
method
method
Rapid dialing key + Start key
Group
dialing
dialing
Registered key
Rapid dialing key
10-key (Sub address not available)
10-key (Sub address not available)
Max. number of
registration per
group dialing
registration per
group dialing
200 items (The total number of
registration is 200 items.)
registration is 200 items.)
Registerable
number
number
Numbers registered to rapid dialing,
and numbers entered with 10-key
and numbers entered with 10-key
Registered name
36 letters
User tag
classification
classification
YES
Transmission
method
method
Rapid dialing key + Start key
Program
Number of items
8 items
Registerable
items
items
All items during transmission except
time specification/original/document
size/duplex/job build.
time specification/original/document
size/duplex/job build.
Registered name
36 letters
Call method
By pressing program key
Change in setup
after calling
after calling
NO (Change in setup is available for
time specification/document size/
original/duplex/job build. (Cannot set
duplex/job build if select dual page
scan when setting.))
time specification/document size/
original/duplex/job build. (Cannot set
duplex/job build if select dual page
scan when setting.))
Relay
group
group
Number of items
10 groups
Registered name
36 letters
Relay station
number
registration
number
registration
10-key only
Reception
station number
registration
station number
registration
10-key dialing
(Input the number that registered in
relay station for rapid/group/speed
dial)
(Input the number that registered in
relay station for rapid/group/speed
dial)
Sender’s name
20 items (registration/display: 22 letters)
Registered by key operator program.
Registered by key operator program.
Sender’s number
20 digits, registered with key operator program
Registration of
polling allow
number
polling allow
number
10 items, 20 digits, registered by key operator
program
program
System number
registration
registration
1 items, 4 digits, registered by key operator
program
program
Registration of
polling allow ID
number
polling allow ID
number
Up to 10 items in 4 digits. Registered by key
operator program.
operator program.
Relay ID code
registration
registration
10 items, 20 digits, registered by key operator
program
program
Key entry
YES
Letters allowed
for input
for input
3 types of keyboard available
YES (Service tool. Dial registration can be made with PC.)
Registered by key operator program.
Backup of registration in power
failure
failure
SRAM used, by built-in battery
Handset
NO
On-hook function
YES
Reserve
NO
Pause
YES (1 to 15sec: Default 2sec, set
by key operator program)
by key operator program)
Telephone transmission in
power failure
power failure
NO (However, external telephone
transmission is allowed.)
transmission is allowed.)
Sound
volume
adjustment
volume
adjustment
Ringer volume
YES (Set by key operator program
to High/Medium/Low/Silent.)
to High/Medium/Low/Silent.)
Line monitor
sound
sound
YES (Set by key operator program
to High/Medium/Low/Silent.)
to High/Medium/Low/Silent.)
Speaker sound
YES (Set by key operator program
to High/Medium/Low.)
to High/Medium/Low.)
Transmission
complete sound
complete sound
YES (Set by key operator program
to High/Medium/Low/Silent.)
to High/Medium/Low/Silent.)
AR-FX7 SPECIFICATIONS 2 - 4
9.
Memory system
10. Additional information function for
transmission
11. Additional print function when
receiving
12. Recording table system
(1) Communication record function
(2) Communication result report function
Transmission complete sound
tone setup (transmission end)
tone setup (transmission end)
YES (Set by key operator program
to PATTERN 1/2/3.)
to PATTERN 1/2/3.)
Transmission complete sound
tone setup (reception end)
tone setup (reception end)
YES (Set by key operator program
to PATTERN 1/2/3.)
to PATTERN 1/2/3.)
Transmission complete sound
time setup
time setup
YES (Set by key operator program.
2.0/2.5/3.0/3.5/4.0 sec.)
2.0/2.5/3.0/3.5/4.0 sec.)
Scan end sound
YES (Set by soft switch.)
Tone pulse switch
Cancel tone/pulse switch set by the
key operator program.
Set with the service switch.
key operator program.
Set with the service switch.
External telephone
connection
connection
YES
Remote
reception switch
reception switch
YES (Switch number is in 1 digit +
∗∗
) 5
∗∗
Telephone/
Fax
Fax
Sound
response
response
NO
Answering
voice recording
voice recording
NO
Memory capacity
Standard
2MB
Option
8MB
Memory content
(transmission
reservation)
confirmation
(transmission
reservation)
confirmation
LCD display
YES
Printout
YES
Memory use status
YES (% display)
Document data memory backup
in power failure
in power failure
YES (Flash memory)
Page counter
YES
Date printing
YES (day/month/year/the day of
week, year is in 4 digits)
week, year is in 4 digits)
Date/ display sequential
switch
switch
NO
Cover
paper item
paper item
Date
YES
Receiver’s
name
name
YES
Receiver’s
number
number
YES
Sender’s
name
name
YES
Sender’s
number
number
YES
Display of
number of
documents
transmitted
number of
documents
transmitted
YES
Transmission
message
message
YES
Print paper
size
size
A4
Transmission message
(Regular message)
(Regular message)
(U.K.)
CONFIDENTIAL/PLEASE.
DISTRIBUTE/URGENT/PLEASE
CALL BACK/IMPORTANT
CONFIDENTIAL/PLEASE.
DISTRIBUTE/URGENT/PLEASE
CALL BACK/IMPORTANT
(France)
COFIDENTIEL/
VEUILLEZ DISTRIBUER
URGENT
VEUILLEZ RAPPELER
IMPORTANT
COFIDENTIEL/
VEUILLEZ DISTRIBUER
URGENT
VEUILLEZ RAPPELER
IMPORTANT
(Germany)
VERTRAULICH
BITTE VERTEILEN
EILIG
BITTE RÜCKRUF
WICHTIG
VERTRAULICH
BITTE VERTEILEN
EILIG
BITTE RÜCKRUF
WICHTIG
Sender print
NO
User message
NO
Index print
YES (Set by key operator program)
Communication record
table size
table size
A4 (Not output when paper larger than
A5 is not set.)
A5 is not set.)
Communication record
memory capacity
memory capacity
50 items in total of transmission and
reception
reception
Communication record
table
table
Max. 50 items for each of transmission
and reception (Total of transmission and
reception is up to 50 items.) Record table
is outputted separately. If registration
exceeds 50, the oldest one is deleted.
and reception (Total of transmission and
reception is up to 50 items.) Record table
is outputted separately. If registration
exceeds 50, the oldest one is deleted.
Time-specified output
YES (1 time per day)
Output when
recording memory full
recording memory full
YES (Print/not print is set by key
operator)
operator)
Output of individual
department
department
YES (Communication time of each
department is outputted as department
management record table.)
department is outputted as department
management record table.)
Time-specified
communication table
communication table
Common with transmission record table
Confidential reception
check table
check table
YES
Commu-
nication
result
table
nication
result
table
Single sending
YES (Print out all report/Print out
error report only/No printed report.
With key operator program)
error report only/No printed report.
With key operator program)
Broadcast
communication
report
communication
report
YES (Print out all report/Print out
error report only/No printed report.
With key operator program)
error report only/No printed report.
With key operator program)
Reception
YES (Print out all report/When error
occurs/No printed report. With key
operator program)
occurs/No printed report. With key
operator program)
Confidential
reception
reception
YES (Print out notice page/Not print
out notice page. With key operator
program)
out notice page. With key operator
program)
Image memory print
YES (Print out all report/When error
occurs/No printed report. With key
operator program)
occurs/No printed report. With key
operator program)