Sharp AR-FN7 (serv.man11) Service Manual / Technical Bulletin ▷ View online
ARE358
Sharp Electronics (UK) Ltd., Technical Services Group
1.Model Name:
AR-FN7
2.Description:
A lever is pushed back due to interference between the mylar attached to the Guide
dummy puncher paper (2-39) and the lever section of the flag sensor (4-11). In order to
alleviate the problem, the mylar’s shape is modified to widen the space between the mylar
and the lever. Also, a pressure mylar is added to prevent the mylar from becoming
detached.
dummy puncher paper (2-39) and the lever section of the flag sensor (4-11). In order to
alleviate the problem, the mylar’s shape is modified to widen the space between the mylar
and the lever. Also, a pressure mylar is added to prevent the mylar from becoming
detached.
3.Action:
From December 2001 production.
Current parts
New parts
Ref.
No.
Model
name
Version P/G No.
Parts code
Parts code
Price
rank
Parts name
Effective
time
!"#$%&
'()"*$&
)+,-,#.
Note
2-
0CW4B10081000
0CW4B10081010
AL
Mylar
4
ARFN7
2-
---
0CW4110P445A1
AN Pressure mylar
2001/12
5
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
IMPROVING THE LEVER PUSHBACK CAUSED BY
INTERFERENCE OF THE MYLAR WITH THE SENSOR
TECHNICAL BULLETIN
Date:
21 March 2002
Model: ARFN7
Ref.:
Ref.:
007
Colour: White
Page:
Page:
1 of 1
Display
