DOWNLOAD Sharp AR-FN6 Service Manual ↓ Size: 4.63 MB | Pages: 25 in PDF or view online for FREE

AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-1

1

Top cover

2

Knob

3

Top tray

4

Staple compiler

5

Offset tray

6

Front cover

7

Staple unit

2

3

5

1

AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-2

Code

Name

Function

Remark

1

Main PWB

Main Control PWB

Communication with the machine, control of the machine operations

2

MM

Main Motor

Drives transport rollers

3

JFM

Jogger Front Motor

F side alignment plate drive

4

JRM

Jogger Rear Motor

R side alignment plate drive

5

PSM

Pushher Motor

Pusher drive

6

STM

Staple Motor

Staple drive

7

STUM

Staple Unit Motor

Stapler shift

8

STTM

Staple Unit Turn Motor

Stapler rotation

9

EVM

Elevator Motor

Offset tray up-down shift

10

T2OM

Tray 2 Ouput Motor

Drive of paper exit paddler to offset tray

11

FGS

Finisher Gate Solenoid

Paper entry gate selection

12

SCGS

Staple Compiler Gate Solenoid

Staple paper entry gate selection

13

SCRS

Staple Compiler Rolor Solenoid

Belt roller press/release selection

14

PPS

Paper Push Solenoid

Paper rear edge holding drive selection

15

SPS

Stopper Solenoid

Stopper drive selection

16

T2S

Tray 2 Solenoid

Paper exit paddler drive selection

AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-3

Code

Name

Function

Active condition

Remark

1

PID

Paper In Detect Sensor

Detection of paper entry into the 
interface transport section

L : Paper loaded

2

DOPD

Door Open Detect Sensor

Upper side cover open/close detection L : Door open

3

T1PF

Tray 1 Paper Full Detect Sensor

Upper side tray paper exit full detection L : Paper full

4

PPD

Paper pushl Detect Sensor

Detection of paper holding return in the 
compiler

H : Home position

5

SCID

Staple Compiler In Detect Sensor 2

Staple paper entry detection

L : Paper loaded

6

SCID2

Staple Compiler In Detect Sensor

Staple paper entry detection

L : Paper loaded

7

SCPD

Staple Compiler Paper Detect Sensor

Paper detection in the compiler

L : Paper loaded

8

JFHP

Jogger Front Home Position Sensor

Jogger F home position detection

H : Home position

9

JRHP

Jogger Rear Home Position Sensor

Jogger R home position detection

H : Home position

10

PSHP

Pushher Home Position Sensor

Pusher home position detection

H : Home position

11

STTHP1

Staple Turn Home Position Sensor 1

Staple rotation home position detection

Detected by combination 
of STTHP1 and STTHP2

12

STTHP2

Staple Turn Home Position Sensor 2

Staple rotation home position detection

13

STUHP

Staple Turn Home Position Sensor

Staple shift home position detection

H : Home position

14

POD

Paper Out Detect Sensor

Paper exit detection

L : Paper loaded

15

T2UP

Tray 2 Upper Detect Sensor

Offset tray upper limit position 
detection

H : Upper limit

16

T2DN

Tray 2 Down Detect Sensor

Offset tray lower limit position detection H : Lower limit

17

T2PD

Tray 2 Paper Detect Sensor

Offset tray paper empty detection

L : Paper loaded

18

DSW1

Door Switch 1

Right upper door open/close detection L : Door open

19

DSW2

Door Switch 2

Front door open/close detection

L : Door open

20

STHP

Stapler Home Position Sensor

Stapler home position detection 

L : Home position

21

STNC

Stapler No Cartridge Sensor

Stapler cartridge empty detection

H : Empty

22

STLS

Stapler Low Staple Sensor

Stapler staple empty detection

H : Empty

23

STSP

Stapler Self Priming Sensor

Stapler staple ready position detection L : Ready

AR-FN6 MACHINE OPERATION-1

When using the stapling function, select "Properties" on the printer driver setting screen, open the "Main" tab shown in the right illustration, and then

select "Left", "Right" or "Top " at "Binding Edge" and "1 Staple" or  "2 Staples" in the "Staple" drop down.

NOTES:

•The settings screens above will appear only if the devices have been set properly in the printer driver.

•The combination of paper selection and other functions may not be compatible. For instance, if heavy paper, envelopes, label stock, etc. are selected,

it will not be possible to select duplex, offset tray, saddle stitch, etc.

The illustration below shows the screen for a PCL printer driver in the Windows 98 environment.

If you touch the [OUTPUT] key on the copy mode basic screen, a screen for selecting the sort/group/staple sort functions and selecting an exit tray will
appear.

If this function is selected, all copies of the same original will be grouped.
2 : [STAPLE SORT] key

If this function is selected, sorted copies will be stapled and delivered to

the offset tray. (not offset stacked)
3 : [SORT] key

If this function is selected, each set of copies will be sequentially

delivered.
4 : Icon display

The icon of the selected function (sort, staple sort or group) is displayed.

5 : [OFFSET] key
If this function is selected (checked), the offset function will be enabled. If

the check mark is cleared, the offset function will be disabled. (If the

staple sort function is selected, the check mark of the offset function will
be automatically cleared.)

If the offset tray is selected, printed sheets will be delivered to the offset
tray. (If the staple sort function is selected, the offset tray will be

automatically selected.)

7 : [TOP TRAY] key
If the top tray is selected, printed sheets will be delivered to the top tray.

Press to close this screen and to return to the basic screen.

*

If a function is selected, the corresponding key will be highlighted.

OK

STAPLE 

SORT

OUTPUT

GROUP

SORT

OFFSET 
TRAY

TOP TRAY

OFFSET

1

2

3

4

5

6

7

8