Sharp AR-FN6 Service Manual ▷ View online
AR-FN6 UNPACKING AND INSTALLATION-3
8) Attach the power supply unit.
Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.
9) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the
printer and slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
<2>Connect the power supply unit harness connector to CN11 (red
connector) of the PCU PWB of the main unit of the printer.
<3>Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the power supply unit harness is arranged
At this time, ensure that the power supply unit harness is arranged
as shown in the illustration.
•Fix the harness securely to the wire saddle.
10) Arrange the harness of the finisher.
<1>Pass the harness of the finisher between the power supply unit and
<1>Pass the harness of the finisher between the power supply unit and
the frame of the stand/paper drawer and connect it to the connector
of the power supply unit.
<2>Fit the snap band attached to the finisher at the position shown in the
illustration to fix the harness.
11) Attach the rear cabinet of the stand/paper drawer.
<1>Pass the AC cord of the power supply unit as shown in the illustration
and fix the rear cabinet of the stand/paper drawer with the screws.
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper
drawer and fix it with the removed screw.
12) Connect the AC cord of the optional power supply unit to the main
unit of the printer.
<1>Connect the AC cord of the power supply unit to the inlet connector
of the main unit of the printer at the location shown in the illustration.
Optional power supply unit
Screws
Screws
Harness cover
Cut out.
Screw
Connector
CN11
Wire saddle
Harness cover
Optional power
supply harnesses
supply harnesses
Screw
Wire saddle
Snap band
Finisher harness
Power supply unit
connector
connector
Rear cabinet
Screw
AC inlet cover
AC cord
AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-1
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
A. External view
B. Internal structure
*****************************************************************TBD*****************************************************************
1
Top cover
2
Knob
3
Top tray
4
Staple compiler
5
Offset tray
6
Front cover
7
Staple unit
2
3
5
1
AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-2
C. Motor, Clutch, Solenoid, PWB
Code
Name
Function
Remark
1
Main PWB
Main Control PWB
Communication with the machine, control of the machine operations
2
MM
Main Motor
Drives transport rollers
3
JFM
Jogger Front Motor
F side alignment plate drive
4
JRM
Jogger Rear Motor
R side alignment plate drive
5
PSM
Pushher Motor
Pusher drive
6
STM
Staple Motor
Staple drive
7
STUM
Staple Unit Motor
Stapler shift
8
STTM
Staple Unit Turn Motor
Stapler rotation
9
EVM
Elevator Motor
Offset tray up-down shift
10
T2OM
Tray 2 Ouput Motor
Drive of paper exit paddler to offset tray
11
FGS
Finisher Gate Solenoid
Paper entry gate selection
12
SCGS
Staple Compiler Gate Solenoid
Staple paper entry gate selection
13
SCRS
Staple Compiler Rolor Solenoid
Belt roller press/release selection
14
PPS
Paper Push Solenoid
Paper rear edge holding drive selection
15
SPS
Stopper Solenoid
Stopper drive selection
16
T2S
Tray 2 Solenoid
Paper exit paddler drive selection
1.Main PWB
2.MM
3.JFM
4.JRM
5.PSM
6.STM
7.STUM
8.STTM
9.EVM
10.T2OM
11.FGS
12.SCGS
13.SCRS
14.PPS
15.SPS
16.T2S
AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-3
D.Sensor
Code
Name
Function
Active condition
Remark
1
PID
Paper In Detect Sensor
Detection of paper entry into the
interface transport section
interface transport section
L : Paper loaded
2
DOPD
Door Open Detect Sensor
Upper side cover open/close detection L : Door open
3
T1PF
Tray 1 Paper Full Detect Sensor
Upper side tray paper exit full detection L : Paper full
4
PPD
Paper pushl Detect Sensor
Detection of paper holding return in the
compiler
compiler
H : Home position
5
SCID
Staple Compiler In Detect Sensor 2
Staple paper entry detection
L : Paper loaded
6
SCID2
Staple Compiler In Detect Sensor
Staple paper entry detection
L : Paper loaded
7
SCPD
Staple Compiler Paper Detect Sensor
Paper detection in the compiler
L : Paper loaded
8
JFHP
Jogger Front Home Position Sensor
Jogger F home position detection
H : Home position
9
JRHP
Jogger Rear Home Position Sensor
Jogger R home position detection
H : Home position
10
PSHP
Pushher Home Position Sensor
Pusher home position detection
H : Home position
11
STTHP1
Staple Turn Home Position Sensor 1
Staple rotation home position detection
Detected by combination
of STTHP1 and STTHP2
of STTHP1 and STTHP2
12
STTHP2
Staple Turn Home Position Sensor 2
Staple rotation home position detection
13
STUHP
Staple Turn Home Position Sensor
Staple shift home position detection
H : Home position
14
POD
Paper Out Detect Sensor
Paper exit detection
L : Paper loaded
15
T2UP
Tray 2 Upper Detect Sensor
Offset tray upper limit position
detection
detection
H : Upper limit
16
T2DN
Tray 2 Down Detect Sensor
Offset tray lower limit position detection H : Lower limit
17
T2PD
Tray 2 Paper Detect Sensor
Offset tray paper empty detection
L : Paper loaded
18
DSW1
Door Switch 1
Right upper door open/close detection L : Door open
19
DSW2
Door Switch 2
Front door open/close detection
L : Door open
20
STHP
Stapler Home Position Sensor
Stapler home position detection
L : Home position
21
STNC
Stapler No Cartridge Sensor
Stapler cartridge empty detection
H : Empty
22
STLS
Stapler Low Staple Sensor
Stapler staple empty detection
H : Empty
23
STSP
Stapler Self Priming Sensor
Stapler staple ready position detection L : Ready
1.PID
2.DOPD
3.T1PF
9.JRHP
18.DSW1
7.SCPD
15.T2UP
14.POD
16.T2DN
23.STSP
22.STLS
21.STNC
20.STHP
19.DSW2
11.STTHP1
12.STTHP2
4.PPD
8.JFHP
13.STUHP
5.SCID
6.SCID2
10.PSHP
17.T2PD
Click on the first or last page to see other AR-FN6 service manuals if exist.