DOWNLOAD Sharp AR-FN6 Service Manual ↓ Size: 4.63 MB | Pages: 25 in PDF or view online for FREE

Model
AR-FN6
Pages
25
Size
4.63 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual
File
ar-fn6.pdf
Date

Sharp AR-FN6 Service Manual ▷ View online

AR-FN6 UNPACKING AND INSTALLATION-2
<5>Attach the mounting plates to the positions shown in the illustration 
and fix them with screws A.
4) Insert the staple cartridge.
<1>Pull out the staple unit.
<2>Insert the staple cartridge.
<3>Slide the release lever to the left and return the staple unit.
5) Attach the trays and the paper holder.
Attach tray 1, tray 2, and the paper holder to the positions shown in
the illustration.
6) Remove the AC inlet cover and then remove the rear cabinet of the
stand/paper drawer.
<1>Remove the screw that fixes the AC inlet cover and then remove the 
AC inlet cover.
<2>Remove the AC cord of the power supply unit from the inlet 
connector of the main unit of the printer.
Remove the four screws that fix the rear cabinet and then remove the 
rear cabinet.
If a multi purpose drawer has been installed, steps 7) to 9) are needed.
If a stand/MPD & 2000 sheet paper drawer or stand/3 x 500 sheet paper
drawer has been installed, proceed to step 10).
7) Process the AC inlet cover attached to the rear cabinet of the stand/
paper drawer.
Remove the screw that fixes the AC inlet cover and then remove the
AC inlet cover.
Process the AC inlet cover as shown in the illustration.
Mounting plates
Screws A
(Rear side)
Tray 1
Paper holder
Tray 2
Screw
AC inlet cover
Rear cabinet
AC inlet cover
Cut out.
AR-FN6 UNPACKING AND INSTALLATION-3
8) Attach the power supply unit.
Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.
9) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the 
printer and slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
<2>Connect the power supply unit harness connector to CN11 (red 
connector) of the PCU PWB of the main unit of the printer.
<3>Reattach the harness cover to its original position and fix it with the 
removed screw.
At this time, ensure that the power supply unit harness is arranged 
as shown in the illustration.
•Fix the harness securely to the wire saddle.
10) Arrange the harness of the finisher.
<1>Pass the harness of the finisher between the power supply unit and 
the frame of the stand/paper drawer and connect it to the connector 
of the power supply unit.
<2>Fit the snap band attached to the finisher at the position shown in the 
illustration to fix the harness.
11) Attach the rear cabinet of the stand/paper drawer.
<1>Pass the AC cord of the power supply unit as shown in the illustration 
and fix the rear cabinet of the stand/paper drawer with the screws.
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper 
drawer and fix it with the removed screw.
12) Connect the AC cord of the optional power supply unit to the main
unit of the printer.
<1>Connect the AC cord of the power supply unit to the inlet connector 
of the main unit of the printer at the location shown in the illustration.
Optional power supply unit
Screws
Screws
Harness cover
Cut out.
Screw
Connector
CN11
Wire saddle
Harness cover
Optional power
supply harnesses
Screw
Wire saddle
Snap band
Finisher harness
Power supply unit
connector
Rear cabinet
Screw
AC inlet cover
AC cord
AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-1
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
A. External view
B. Internal structure
*****************************************************************TBD*****************************************************************
1
Top cover
2
Knob
3
Top tray
4
Staple compiler
5
Offset tray
6
Front cover
7
Staple unit
2
3
5
1
AR-FN6 EXTERNAL VIEWS AND INTERNAL STRUCTURES-2
C. Motor, Clutch, Solenoid, PWB
Code
Name
Function
Remark
1
Main PWB
Main Control PWB
Communication with the machine, control of the machine operations
2
MM
Main Motor
Drives transport rollers
3
JFM
Jogger Front Motor
F side alignment plate drive
4
JRM
Jogger Rear Motor
R side alignment plate drive
5
PSM
Pushher Motor
Pusher drive
6
STM
Staple Motor
Staple drive
7
STUM
Staple Unit Motor
Stapler shift
8
STTM
Staple Unit Turn Motor
Stapler rotation
9
EVM
Elevator Motor
Offset tray up-down shift
10
T2OM
Tray 2 Ouput Motor
Drive of paper exit paddler to offset tray
11
FGS
Finisher Gate Solenoid
Paper entry gate selection
12
SCGS
Staple Compiler Gate Solenoid
Staple paper entry gate selection
13
SCRS
Staple Compiler Rolor Solenoid
Belt roller press/release selection
14
PPS
Paper Push Solenoid
Paper rear edge holding drive selection
15
SPS
Stopper Solenoid
Stopper drive selection
16
T2S
Tray 2 Solenoid
Paper exit paddler drive selection
1.Main PWB
2.MM
3.JFM
4.JRM
5.PSM
6.STM
7.STUM
8.STTM
9.EVM
10.T2OM
11.FGS
12.SCGS
13.SCRS
14.PPS
15.SPS
16.T2S
Page of 25
Display

Click on the first or last page to see other AR-FN6 service manuals if exist.