Sharp AR-F12 (serv.man9) Service Manual ▷ View online
CHAPTER 9 UNPACKING AND INSTALLATION
9-5
27) INSTALL
28) REMOVE
29) INSTALL
II. PUNCH UNIT (AR-PN3)
When installing a hole punch unit in a finisher,
follow these installation instructions instead of
procedures 13-b) to 13-e) in the installation
instructions of the Finisher.
follow these installation instructions instead of
procedures 13-b) to 13-e) in the installation
instructions of the Finisher.
WARNING
The unpacking and set-up procedure shall be
done by a qualified service technician.
done by a qualified service technician.
1)
UNPLUG
2)
OPEN
3)
REMOVE
CHAPTER 9 UNPACKING AND INSTALLATION
9-6
4)
REMOVE
5)
REMOVE
6)
INSTALL
7)
INSTALL
8)
INSTALL
9)
CONNECT
10) INSTALL
11-a) INSTALL
Two screws
훽 are packed with the saddle
stitch finisher.
Saddle stitch finisher
CHAPTER 9 UNPACKING AND INSTALLATION
9-7
11-b) INSTALL
Non-saddle stitch finisher
The screw
The screw
훽 is packed with the non-saddle
stitch finisher.
12) REMOVE
13) INSTALL
The part
훽 and two screws 훾 are packed
with the Finisher.
14) INSTALL
The part
훽 is packed with the Finisher.
15) OPEN
16) INSTALL
17) CLOSE
18) END
Non-saddle stitch finisher
CHAPTER 9 UNPACKING AND INSTALLATION
9-8
III. INSERTER (AR-CF1)
WARNING
The unpacking and set-up procedure shall be
done by a qualified service technician.
done by a qualified service technician.
1)
UNPLUG
2)
DISCONNECT
3)
REMOVE
4)
REMOVE
5)
OPEN
6)
REMOVE
Saddle stitch finisher
Non-saddle stitch finisher
When the hole punch unit is installed
When the hole punch unit is not installed
8
9
11
16
22
6
13
8
10
9
15
18
16
BID
M4X12
M4X12
TPPAN
M4X12
M4X12
BID
M4X8
M4X8
BID
M4X8
M4X8
BID
M4X8
M4X8
BID
M4X8
M4X8
Click on the first or last page to see other AR-F12 (serv.man9) service manuals if exist.