Sharp AR-F12 (serv.man9) Service Manual ▷ View online
CHAPTER 9 UNPACKING AND INSTALLATION
9-3
13-c) INSTALL
13-d) INSTALL
13-e) INSTALL
14) REMOVE
15) REMOVE
16) INSTALL
17) INSTALL
18) INSTALL
(AR-FN12)
(AR-FN11)
(AR-FN12)
CHAPTER 9 UNPACKING AND INSTALLATION
9-4
19) REMOVE
20) INSTALL
21) INSTALL
22) REMOVE
23) REMOVE
24) INSTALL
25) INSTALL
26) INSTALL
CHAPTER 9 UNPACKING AND INSTALLATION
9-5
27) INSTALL
28) REMOVE
29) INSTALL
II. PUNCH UNIT (AR-PN3)
When installing a hole punch unit in a finisher,
follow these installation instructions instead of
procedures 13-b) to 13-e) in the installation
instructions of the Finisher.
follow these installation instructions instead of
procedures 13-b) to 13-e) in the installation
instructions of the Finisher.
WARNING
The unpacking and set-up procedure shall be
done by a qualified service technician.
done by a qualified service technician.
1)
UNPLUG
2)
OPEN
3)
REMOVE
CHAPTER 9 UNPACKING AND INSTALLATION
9-6
4)
REMOVE
5)
REMOVE
6)
INSTALL
7)
INSTALL
8)
INSTALL
9)
CONNECT
10) INSTALL
11-a) INSTALL
Two screws
훽 are packed with the saddle
stitch finisher.
Saddle stitch finisher