[If Section D in the picture below is damaged] Please note that Repair part can be used when Section D in the picture below is cracked only. If Section D comes off completely, Repair part must not be used.
D
E
(7) Remove Screw at Section E in the picture above.
(8)
Fasten Repair part by the screw that has been removed from Section E in the picture above.
Repair part
Repair part
Page ( 4 / 5 )
[If Section F in the picture below is damaged] Please note that Repair part can be used only if Section F in the picture below completely comes off. If Section F is cracked Repair part must not be used.
F
G
Gear(46T)
E type ring
(9)
Remove Screw at Section G in the picture above. Remove also E-type ring and Gear (46T) in the picture above.
(10) Remove E-type ring shown in the picture below.
E type ring
Page ( 5 / 5 )
(11)Fit Repair part. Then fasten E-type ring and Screw at Section H.
Fasten Screw at Section H along with Repair part and Earth terminal.
(12) Fit Gear (46T) and tighten E-type ring.
Gear(46T)
E type ring
E type ring
H
Repair part
Page ( 5 / 5 )
(11)Fit Repair part. Then fasten E-type ring and Screw at Section H.
Fasten Screw at Section H along with Repair part and Earth terminal.
AR-DU1 (serv.man3) ARDU1 Parts Guide (ADU Unit1) Service Manual / Parts Guide
2
188.93 KB
AR-DU1 (serv.man4) ARDU1 Parts Guide (ADU Unit2) Service Manual / Parts Guide
2
212.13 KB
AR-DU1 (serv.man5) ARDU1 Parts Guide (ADU Unit3) Service Manual / Parts Guide
2
146.16 KB
AR-DU1 (serv.man6) ARDU1 Parts Guide (ADU Unit 4) Service Manual / Parts Guide
2
200.65 KB
AR-DU1 (serv.man7) ARDU1 Parts Guide (Packing Material Accesories) Service Manual / Parts Guide
2
38.73 KB
AR-DU1 ARDU1-Specifications Service Manual / Specification
1
26.23 KB
AR-DU1 (serv.man18) Parts Guide Addition. (WHITE) Service Manual / Technical Bulletin
1
66.54 KB
AR-DU1 (serv.man17) 1.In-house Production Of The Operation Manuals (To Improve Productivity). 2.Change Carried Out In The Maker Of The Transport Clutch (To Improve Productivty). 3.Discontinuance Of The Desk Connection Screw (To Improve Productivity). (WHITE) Service Manual / Technical Bulletin
3
91.62 KB
AR-DU1 (serv.man16) 1.Change Carried Out In The Height Of The ADU Opening And Closing OPG Boss. 2.Change Carried Out In The PG Quantity Of The Paper Feeding Desk. (WHITE) Service Manual / Technical Bulletin
4
164.09 KB
AR-DU1 (serv.man15) 1.Change Carried Out In The Plastic Slider Washer In The ADU Unit. 2.Action To Alleviate Problems Of Static Electricity In The Op Control PWB Unit. (WHITE) Service Manual / Technical Bulletin
2
157.65 KB
AR-DU1 (serv.man14) Action to alleviate problems of dislocation of the disjunction arm in the ADU unit. (WHITE) Service Manual / Technical Bulletin
1
83.36 KB
AR-DU1 (serv.man13) Increase in strength of ADU frame. (WHITE) Service Manual / Technical Bulletin
2
112.17 KB
AR-DU1 (serv.man12) Change of supplier for sintered bearings. (WHITE) Service Manual / Technical Bulletin
4
188.63 KB
AR-DU1 (serv.man11) Change of parts used to repair damaged frame Service Manual / Technical Bulletin
6
1.94 MB
AR-DU1 (serv.man10) Corrections made to a jamming error caused by the ADU transfer clutch dragging or slipping Service Manual / Technical Bulletin
1
42.93 KB
AR-DU1 (serv.man9) New service part for repairing a broken ADU frame Service Manual / Technical Bulletin
2
239.02 KB
AR-DU1 (serv.man8) Re issue bulletin regarding a parts change - mainly for the mirror mount fixing plate. Service Manual / Technical Bulletin
