DOWNLOAD Sharp AR-DE9 (serv.man3) Service Manual ↓ Size: 1.95 MB | Pages: 47 in PDF or view online for FREE

Model
AR-DE9 (serv.man3)
Pages
47
Size
1.95 MB
Type
PDF
Document
Service Manual / Parts Guide
Brand
Device
Copying Equipment / ARDE9-Parts Guide
File
ar-de9-sm3.pdf
Date

Sharp AR-DE9 (serv.man3) Service Manual / Parts Guide ▷ View online

CODE: 00ZAR15OPTA1E
DIGITAL COPIER OPTIONS
AR-SP3 
(SPF)
AR-FX3 
(FAX)
AR-DE9 
(1 TRAY UNIT)
MODEL
AR-PG1 
(GDI + USB Kit)
∗ For the specifications, operational descriptions, circuit
diagrams, and Parts Guide of the AR-FX3, refer to the AR-F151
Service Manual and Parts Guide.
[ 1 ] GENERAL  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1  -  1
[ 2 ] UNPACKING  AND  INSTALLATION  .  .  .  .  .  .  .  .  .  .  .  .  .  2  -  1
[ 3 ] AR-SP3  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3  -  1
[ 4 ] AR-DE9  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  4  -  1
[ 5 ] AR-PG1  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5  -  1
 
● PARTS GUIDE
CONTENTS
Parts marked with “  ” are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
AR-SP3
AR-FX3
AR-DE9
AR-PG1
AR-SP3
[1] GENERAL
1. List of available options
Model
AR-150
AR-155
AR-F151
Option
AR-SP3
(SPF)
   
 
∗1
AR-FX3
(FAX)
   
 
∗1
AR-DE9
(1 TRAY UNIT)
     
 
∗1
AR-PG1
(GDI + USB Kit)
: Option available
: Option not available
∗1: The option setup is provided in the models for Europe.
FAX and SPF are incompatible.
2. Outline and specifications of each op-
tion
A. AR-SP3 (Single Pass Feeder)
The single pass feeder (SPF) holds up to 30 originals for automatic
feeding.
Part names
Specifications
Acceptable
originals
Weight: 14 to 23 lbs.
Size:
5-1/2
″  × 8-1/2″ to 8-1/2″  × 14″
Capacity: Up to 30 sheets 
Power supply
Drawn from the copier
Weight
Approx.6.6 lbs.(3kg)
Dimensions
19.6
″ (W) × 15″ (D) × 4.3″ (H)
(498 mm (W) 
× 380 mm (D) × 110 mm (H))
B AR-DE9 (250 - Sheet Paper Feed Unit)
The paper feed unit provides the convenience of increased paper
capacity for the copier and a greater choice of paper sizes readily avail-
able for copying.
Part names
Specifications
Copy paper size
5-1/2
″  × 8-1/2″ to 8-1/2″  × 14″
Paper weight
15 lbs. to 21 lbs.
Paper capacity
One paper tray with capacity for 250 sheets
of 21 lb. bond paper
Weight
Approx. 6.6 lbs. (3 kg)
Dimensions
19.6
″ (W) × 15.6″ (D) × 3.5″ (H)
(498 mm (W) 
× 395 mm (D) × 88 mm (H))
Power supply
Drawn from the copier
C. AR-PG1 (GDI + USB Expansion Kit)
(1) MAIN FEATURES
a. Printing from Windows 3.1x, Windows 95, Windows 98*, and
Windows NT 4.0 applications
∗ USB is supported on Windows 98 pre-installed only.
High-speed and high-quality printing can be performed from Win-
dows 3.1x, Windows 95, Windows 98, and Windows NT 4.0 ap-
plications through the SHARP GDI (Graphics Device Interface)
system.
Since print data is processed in the computer, waiting time
during printing is short.
b. High-speed printing at 8 pages/min.
First print time is approximately 9.6 seconds.
(Excluding the communication time with PC)
Print speed is 8 pages/min., when printing multiple pages.
(2) SPECIFICATIONS
Resolution
600 or 300 can be selected.
Page description
language
SHARP GDI (Parallel)
SHARP GDI, USB (USB)
Page orientation
Portrait or landscape
First print time
Approx. 9.6 seconds*
Print speed
(multiple pages)
Approx. 8 pages per minute (letter or A4)
(Parallel)
Approx. 6 pages per minute (letter or A4)
(USB) 
Interface port
Bi-directional parallel interface
(IEEE 1284 compliant) 2 m (6 feet) Max.
USB (B-type) interface (twisted pair cable)
2 m (6 feet) Max.
∗ First print time may differ depending on operating conditions,
such as power-supply voltage and room temperature.
Also the time may differ depending on data quantity to be printed
and applications.
D. AR-FX3 (Facsimile Expansion Kit)
Refer to the AR-F151 Service Manual.
Document feeder tray
Feeding roller cover
Original guides
SPF exit area
Side cover
Tray
AR-SP3
1 – 1
[2] UNPACKING AND INSTALLATION
1. AR-SP3 Instalation Manual
Turn the main switch to the “OFF” position and remove the power plug
from the outlet.
1) Remove the document cover.
Remove the document cover from the copier.
2) Remove the rear cabinet.
Remove the four screws and then remove the rear cabinet.
3) Remove the Mylar sheet from the rear cabinet.
Remove the Mylar sheet that covers the hole for the actuator of
sensor unit.
4) Remove the hinge guides L and R.
Remove the screws (two for each) and then remove the hinge
guides L and R.
5) Attach the hinge guides L and R.
Attach the hinge guides L and R by fitting the pawls (two for
each) into the frame of the copier and secure them with the two
screws (M3 
× 8) for each that have been removed in step 3.
6) Place the SPF on the copier.
AR-SP3
2  –  1
7) Connect the SPF with the copier using the relay harness.
<1> Fit the snap band to the position shown in the illustration.
<2> Attach the core to the relay harness. At this time, take care on
the core position and twist the harness two or three times.
<3> Secure the relay harness with the harness clamp.
<4> Connect the connector.
(Connect the connectors by aligning the black lines.)
8) Attach the core to the ground wire and secure it.
<1> Attach the core with two binding bands as shown in the il-
lustration by taking care that the core is in the specified posi-
tion.
<2> Secure the ground wire to the hinge guides with the binding
bands.
<3> Secure the ground terminal to the frame of the copier with a
screw (M3 
× 10) and handle the wiring so that the core is
under the hinge guides.
9) Remove the securing tape of the relay harness and connect the
harness to the sensor unit.
Remove the tape that secures the harness.
Then connect the connector of the relay harness to the supplied
sensorunit.
10) Attach the sensor unit.
While pushing up the sensor unit fully, secure it to the PWB
holder with a screw (M3 
× 8).
11) Attach the rear cabinet.
Remove the rib from the rear cabinet.
<1> Hang the four pawls shown in the illustration below on the
plate.
<2> Push down the actuator of the sensor unit.
<3> Position the cabinet to the upper screw positions.
<4> Ensure that the actuator is inserted into the square hole of the
cabinet.
Note: While pushing down the actuator of the sensor unit, attach
the rear cabinet so that the actuator is inserted into the hole
of the rear cabinet.
12) Attach the cover to the rear cabinet.
<1> Align the arrow marks as shown in the illustration.
<2> Then slide the cover to the left.
<3> Secure the cover with a screw.
M3X8
AR-SP3
2  –  2
Page of 47
Display

Sharp AR-DE9 (serv.man3) Service Manual / Parts Guide ▷ Download

  • DOWNLOAD Sharp AR-DE9 (serv.man3) Service Manual ↓ Size: 1.95 MB | Pages: 47 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Parts Guide for the Sharp AR-DE9 (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-DE9 (serv.man3) Copying Equipment. Information contained in Sharp AR-DE9 (serv.man3) Service Manual / Parts Guide (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.