PRODUCT OUTLINE
The AR-DD1 is the exclusive-use desk for a copier body, which
stores copy paper.
The AR-DD1 (1-step paper feed desk) serve as the paper feed unit
which also serves as a desk for a copier.
The AR-DE1 is composed of the paper feed/transport section, the
lift-up section, and the paper feed tray section. By installing the AR-
DE1 to a copier, the additional paper feed tray is available as shown
Installation of the paper feed module (AR-CS1) to the AR-DE1 adds
one more paper feed tray.
Desk-type paper feed unit
2. No. of steps of paper feed:
1-step (2-step with the AR-CS1 installed)
3. Paper size:
4. Paper weight:
5. Paper capacity:
Each tray 500 sheets (Paper weight 80g/m
6. Paper set:
Center reference, tray size when shipping A3
9. Paper transport speed:
306mm/s (The speed depends on the
communication command from the copier body.)
10. Paper feed speed:
11. Tray falling/rising time (AR-DE1):
Within 8 sec (at min. number of set paper)
5V and 24V supplied from the copier.
AR-DE1 25kg (excluding paper)
14. Drive form:
Drive motor (The DC brushless motor and the control PWB
are included in the desk.)
Controlled by the communication command from the copier.
16. Paper transport path:
Paper entry from the lower section of the copier.
17. Dehumidifying heater:
Provided (power consumption 14W
18. External dimensions:
600(W) x 604(D)
19. Power consumption:
24W (MAX) 4.5W (Ready condition)
 UNPACKING AND
For unpacking, refer to the figure below.
[1-step paper feed desk]
(Slot for AR-CS1)
Paper feed module
1 – 1