DOWNLOAD Sharp AR-D14 Service Manual ↓ Size: 3.6 MB | Pages: 44 in PDF or view online for FREE

AR-D13/D14/MU1/DC1 SPECIFICATIONS-1

AR-D13

Type

Stand MPD&2000 Sheet Paper Drawer
(large capacity tray + multi purpose drawer)

Transport speed

To support 35-45 sheet/minute

Transport alignment

Center alignment 

Paper size

1 Tray

A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c, Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

2 Tray

A4, 8.5"x11"

How to change the paper 
size

Guide adjustment by user / Software setting 
by user

Factory default paper 
size setting

8.5"x11"

Media 
available for 
paper feeding

1 Tray

Plain paper:60-128g/m² / 16-34lbs

Index paper:176g/m² / 47lbs

Cover paper:200-205g/m² / 54-55lbs

Envelope:75-90g/m², 20-24lbs

Transparency film:(TBD)

* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.

2 Tray

Size guide plate comes with LCC unit.
Plain 60-105g/m² / 16-28lbs

Paper 
capacity

1 Tray

Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets

2 Tray

880+1,320sheets(64g/m²) / 
800+1,200sheets(80g/m²)

Paper type

1 Tray

Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)

2 Tray

Plain, recycled, pre-printed, pre-punched, 
color, letter head
(User can set bi-type for each of the above 
paper type.)

Sizes to be 
detected

1 Tray

AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R

AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R

Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

Ignore detection selectable:

2 Tray

Size setting by the serviceman

Paper balance detection

Provided (paper empty and 6 steps)

Paper loading system

To be loaded from the upper side with front 
loading system

Tray ascent/
descent time

Ascent

Within 12 seconds

At paper empty, required time from tray insert 
to the empty detection

Descent

Own weight descent

Dehumidification heater

Not provided

Power consumption

32.2W or lower

Power source

Supplied from main unit 
(DC24V  1.3A / DC5V  0.2A)

External dimensions

585x530x404 (mm)

Occupied dimensions

Weight

Approx. 35kg

AR-D14

Type

Stand /3x500 Sheet Paper Drawer 
(2 paper trays + 1 multi purpose drawer)

Transport speed

To support 35-45 sheet/minute

Transport alignment

Center alignment

Paper size

1 Tray

A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c,Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

2 or 3 
Tray

A3, B4, A4, A4R, B5, B5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 7.25"x10.5"R

How to change the paper 
size

Unit is delivered with paper guide set at max. 
position in width. (Both of two cassettes.)

Factory default paper 
size setting

To be set to maximum paper guide width at 
factory default status (for both trays)

Media 
available for 
paper feeding

1 Tray

Plain paper:60-128g/m² / 16-34lbs

Index paper:176g/m² / 47lbs

Cover paper:200-205g/m² / 54-55lbs

Envelope:75-90g/m², 20-24lbs

Transparency film:(TBD)

Media 
available for 
paper feeding

1 Tray

* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.

2 or 3 
Tray

Plain 60-105g/m² / 16-28lbs

Paper 
capacity

1 Tray

Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets

2 or 3 
Tray

Standard
paper:500sheets X 2(64g/m²)

Paper type

1 Tray

Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)

2 or 3 
Tray

Plain, recycled, pre-printed, pre-punched, 
color, letter head
(User can set bi-type for each of the above 
paper type.)

AR-D13

AR-D13/D14/MU1/DC1 SPECIFICATIONS-2

Sizes to be 
detected

1 Tray

AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R

AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R

Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

Ignore detection selectable:

2 or 3 
Tray

Automatic detection-AB
(200V system):A3, B4, A4, A4R, B5, B5R,
8.5"x13"

Automatic detection-inch
(100V system): 11"x17", 8.5"x14", 8.5"x13", 
8.5"x11", 8.5"x11"R, 7.25"x10.5"R

Paper balance detection

Provided (paper empty and 3 steps)

Paper loading system

To be loaded from the upper side with front 

loading system

Tray ascent/
descent time

Ascent

Within 7 seconds

At paper empty, required time from tray 
insert to the empty detection

Descent

Own weight descent

Dehumidification heater

Included in the service kit.

Power consumption

32.2W or lower

Power source

Supplied from main unit
(DC24V  1.3A / DC5V  0.2A)

External dimensions

585x530x404 (mm)

Occupied dimensions

Weight

Approx. 32kg

AR-D14

AR-MU1

Type

Multi purpose drawer for add-on use

Transport speed

To support 35-55 sheets/minute

Transport alignment

Center alignment 

Paper size

A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c, Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

How to change the paper 
size

Guide adjustment by user / Software setting 
by user

Factory default paper 
size setting

To be set to maximum paper guide width at 
factory default status.

Media available for paper 
feeding

Plain paper:60-128g/m² / 16-34lbs

Index paper:176g/m² / 47lbs

Cover paper:200-205g/m² / 54-55lbs

Envelope:75-90g/m², 20-24lbs

Transparency film:(TBD)

* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.

Paper capacity

Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets

Paper type

Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)

Sizes to be detected

AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R

AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R

Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)

Ignore detection selectable:

Paper balance detection

Provided (paper empty and 3 steps)

Paper loading system

To be loaded from the upper side with front 
loading system

Tray ascent/
descent time

Ascent

Within 7 seconds

At paper empty, required time from tray insert 
to the empty detection

Descent

Own weight descent

Dehumidification heater

Included in the service kit.

Power consumption

24.5W or lower

Power source

Supplied from main unit 
(DC24V  1A / DC5V  0.1A)

External dimensions

585x530x114 (mm)

Occupied dimensions

Weight

Approx. 11kg

Input

AC 100-127V / 220-240V (Two kinds)

Output

DC 24V 

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-1

•For installation, a power supply unit (AR-DC1) is needed.

1) Turn off the main switch of the main unit of the printer.

Turn the main switch located on the front side of the printer to the

"OFF" position.
Then remove the power plug from the outlet.

2) Attach the adjusters and adjust them.

<1>Insert the left adjusters to the stand/paper drawer.

<2>Turn the five adjusters to lower them until they touch the floor.
<3>Attach the four adjuster covers.

3) Put the main unit of the printer on the stand/paper drawer.

<1>Pull out the paper tray of the main unit until it stops and then remove 

it by lifting both ends of the tray.

<2>Hold the main unit of the printer at the positions shown in the 

illustration and put the main unit on the stand/paper drawer so that 

the front side and the left side of the main unit are aligned to those of 

the stand/paper drawer.

4) Connect the main unit to the stand/paper drawer.
<1>Attach the rear mounting plates with two supplied screws.

<2>Pull out the upper paper tray of the stand/paper drawer until it stops 

and attach the front mounting plates with two supplied screws.
Then, remove the lock of the paper tray and close the tray.

<3>Reattach the paper tray of the main unit.

Left adjuster: 1 pc.

Front mounting
 plates: 2 pcs.

Rear mounting
 plates: 2 pcs.

Adjuster covers: 4 pcs.

Screws: 4 pcs.

Left paper guides: 2 pcs.

Right paper guides: 2 pcs.

 "OFF"

3

3

3

2

2

2

2

1

3

Rear mounting plate

Rear
mounting plate

Screw

Screw

Screw

Screw

Front
mounting plate

Front mounting
plate

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-2

5) Remove the rear cabinet of the stand/paper drawer and remove the

AC inlet cover.

<1>Remove the four screws that fix the rear cabinet and then remove the 

rear cabinet.

<2>Remove the screw that fixes the AC inlet cover and then remove the 

AC inlet cover.

<3>Process the AC inlet cover as shown in the illustration.

6) Attach the power supply unit.

Attach the power supply unit to the positioning portion of the multi

purpose drawer and then fix it with three supplied screws.

7) Connect the power supply unit harness to the PCU PWB of the main

unit of the printer.

<1>Remove the screw that fixes the harness cover of the main unit of the 

printer and slide the harness cover up to remove it.

Process the harness cover as shown in the illustration.

<2>Connect the optional power supply harness connector to CN11 (red 

connector) of the PCU PWB of the main unit of the printer.

<3>Reattach the harness cover to its original position and fix it with the 

removed screw.
At this time, ensure that the optional power supply harness are 

arranged as shown in the illustration.

•Fix the harness securely to the wire saddle.

8) Connect the relay harness of the stand/paper drawer to the power

supply unit.

Connect the relay harness of the stand/paper drawer to the

connector of the power supply unit.

9) Attach the rear cabinet of the stand/paper drawer.

<1>Pass the cord of the power supply unit through the hole of the rear 

cabinet and attach the rear cabinet to the stand/paper drawer.

Rear cabinet

 AC inlet cover

Cut out.

Power supply unit

Screws

Screws

Harness cover

Cut out.

Screw

Connector

CN11

Wire saddle

Harness cover

Optional power
supply harness
2/ Screw

Screw

Wire saddle

Connector of the power supply connector

Relay harness of the
stand/paper drawer

Rear cabinet