AR-D14. Service Manual — Sharp Copying Equipment Service Manual (repair manual)

Model
AR-D14
Pages
44
Size
3.6 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual
File
ar-d14.pdf
Date

View Sharp AR-D14 Service Manual online

Parts marked with “
“ are important for maintaining the safety of the set. 
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LASER PRINTER OPTIONS
PAPER FEED UNIT
OPTIONAL POWER SUPPLY UNIT
AR-D13
AR-D14
AR-MU1
MODEL
AR-DC1
CODE : 00ZARD13//A1E
[1]
PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 - 1
[2]
CONFIGURATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2 - 1
[3]
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3 - 1
[4]
UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . .  4 - 1
[5]
EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . .  5 - 1
[6]
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6 - 1
[7]
DISASSEMBLY AND ASSEMBLY, MAINTENANCE. . . . . . . . .  7 - 1
[8]
BLOCK DIAGRAM, WIRING DIAGRAM. . . . . . . . . . . . . . . . . .  8 - 1
[9]
OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9 - 1
CONTENTS
AR-MU1
AR-D13
AR-DC1
AR-D14
AR-D13/D14/MU1/DC1 PRODUCT OUTLINE, CONFIGURATION-1
[1] PRODUCT OUTLINE
This unit is installed to one of the following machines to serve as a duplex module. 
When installing the unit to one of the following machines, one of the multi-purpose tray (AR-MU1), the large capacity paper feed desk (AR-D13), and
the 3-stage paper feed desk (AR-D14) must be installed in advance.  For the AR-D13 and the AR-D14, the option power unit (AR-DC1) must be
installed together.  
[2] CONFIGURATION
1.
For the AR-D13 and the AR-D14, the option power unit (AR-DC1) must be installed together. 
2.
When the AR-MU1 and the male bin stacker (AR-MS1) or the finisher (AR-FN5) are installed, the optional power unit (AR-DC1) must be installed
together. 
3.
The AR-MU1 cannot be installed together with the saddle finisher (AR-FN)/Scanner unit (AR-EF1/EF2).
Applicable models 
AR-P350 / P450, AR-M350 / M450
DM-3500 / 3501 / 4500 / 4501, DM-3551 / 4551
AR-D14
AR-FN7
AR-MU1
AR-D13
AR-EF1/AR-EF2 
AR-FN6
AR-MS1
AR-DC1
Related to paper feed unit
AR-MU1
AR-D14
AR-D13
Scanner r
a
c
k
Multi purpose drawer
Stand/3 x 500 sheet paper drawer
Stand/MPD & 2000 sheet paper drawer
Multi pur
pose dr
a
w
er
Stand/3 x 500 sheet paper dr
a
w
er
Stand/MPD & 2000 sheet 
Duple
x module/b
ypass tr
a
y
Duple
x module
B/W scanner module/DSPF
Saddle stitch finisher
Finisher
Mail-bin stac
k
e
r
Exit tr
a
y
Punch unit
PS3 e
xpansion kit
F
acsimile e
xpansion kit
Pr
int ser
v
er card
Hard disk dr
iv
e
P
o
w
er supply unit
Upper e
xit tr
a
y
 e
xtension
Multi-function controller board
F
ax memor
y (8 MB)
Netw
or
k scanner e
xpansion kit
AR-D13/D14/MU1/DC1 SPECIFICATIONS-1
[3] SPECIFICATIONS
1. AR-D13
2. AR-D14
AR-D13
Type
Stand MPD&2000 Sheet Paper Drawer
(large capacity tray + multi purpose drawer)
Transport speed
To support 35-45 sheet/minute
Transport alignment
Center alignment 
Paper size
1 Tray
A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c, Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
2 Tray
A4, 8.5"x11"
How to change the paper 
size
Guide adjustment by user / Software setting 
by user
Factory default paper 
size setting
8.5"x11"
Media 
available for 
paper feeding
1 Tray
Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.
2 Tray
Size guide plate comes with LCC unit.
Plain 60-105g/m² / 16-28lbs
Paper 
capacity
1 Tray
Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets
2 Tray
880+1,320sheets(64g/m²) / 
800+1,200sheets(80g/m²)
Paper type
1 Tray
Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)
2 Tray
Plain, recycled, pre-printed, pre-punched, 
color, letter head
(User can set bi-type for each of the above 
paper type.)
Sizes to be 
detected
1 Tray
AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
Ignore detection selectable:
2 Tray
Size setting by the serviceman
Paper balance detection
Provided (paper empty and 6 steps)
Paper loading system
To be loaded from the upper side with front 
loading system
Tray ascent/
descent time
Ascent
Within 12 seconds
At paper empty, required time from tray insert 
to the empty detection
Descent
Own weight descent
Dehumidification heater
Not provided
Power consumption
32.2W or lower
Power source
Supplied from main unit 
(DC24V  1.3A / DC5V  0.2A)
External dimensions
585x530x404 (mm)
Occupied dimensions
Weight
Approx. 35kg
AR-D14
Type
Stand /3x500 Sheet Paper Drawer 
(2 paper trays + 1 multi purpose drawer)
Transport speed
To support 35-45 sheet/minute
Transport alignment
Center alignment
Paper size
1 Tray
A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c,Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
2 or 3 
Tray
A3, B4, A4, A4R, B5, B5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 7.25"x10.5"R
How to change the paper 
size
Unit is delivered with paper guide set at max. 
position in width. (Both of two cassettes.)
Factory default paper 
size setting
To be set to maximum paper guide width at 
factory default status (for both trays)
Media 
available for 
paper feeding
1 Tray
Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
Media 
available for 
paper feeding
1 Tray
* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.
2 or 3 
Tray
Plain 60-105g/m² / 16-28lbs
Paper 
capacity
1 Tray
Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets
2 or 3 
Tray
Standard
paper:500sheets X 2(64g/m²)
Paper type
1 Tray
Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)
2 or 3 
Tray
Plain, recycled, pre-printed, pre-punched, 
color, letter head
(User can set bi-type for each of the above 
paper type.)
AR-D13
AR-D13/D14/MU1/DC1 SPECIFICATIONS-2
3. AR-MU1
4. AR-DC1
Sizes to be 
detected
1 Tray
AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
Ignore detection selectable:
2 or 3 
Tray
Automatic detection-AB
(200V system):A3, B4, A4, A4R, B5, B5R,
8.5"x13"
Automatic detection-inch
(100V system): 11"x17", 8.5"x14", 8.5"x13", 
8.5"x11", 8.5"x11"R, 7.25"x10.5"R
Paper balance detection
Provided (paper empty and 3 steps)
Paper loading system
To be loaded from the upper side with front 
loading system
Tray ascent/
descent time
Ascent
Within 7 seconds
At paper empty, required time from tray 
insert to the empty detection
Descent
Own weight descent
Dehumidification heater
Included in the service kit.
Power consumption
32.2W or lower
Power source
Supplied from main unit
(DC24V  1.3A / DC5V  0.2A)
External dimensions
585x530x404 (mm)
Occupied dimensions
Weight
Approx. 32kg
AR-D14
AR-MU1
Type
Multi purpose drawer for add-on use
Transport speed
To support 35-55 sheets/minute
Transport alignment
Center alignment 
Paper size
A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 
8.5"x11"R, 5.5"x8.5"R
Executive, Japanese p/c, Monarch(envelope)
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
How to change the paper 
size
Guide adjustment by user / Software setting 
by user
Factory default paper 
size setting
To be set to maximum paper guide width at 
factory default status.
Media available for paper 
feeding
Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
* Media heavier than 105g/m² should be 
A4/8.5x11" or smaller.  Media heavier than 
120g/m² should be fed from shorter edge.  
* Only single paper feed is enabled for 
overlay copy or copy on back-side of printed 
paper.
Paper capacity
Standard:500sheets(80g/m²) 
Post card:40sheets 
Envelope:40sheets 
Transparency film:40sheets
Paper type
Plain, recycled, pre-printed, pre-punched, 
color, letter head, labels, heavy, 
transparency, Japanese p/c, envelope
(User can set bi-type for each of the above 
paper type.)
Sizes to be detected
AutomaticAuto-AB:
A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:
11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 
7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):
postal card, Monarch(envelope),
Com-10(envelope), DL(envelope), 
C5(envelope), ISO B5(envelope)
Ignore detection selectable:
Paper balance detection
Provided (paper empty and 3 steps)
Paper loading system
To be loaded from the upper side with front 
loading system
Tray ascent/
descent time
Ascent
Within 7 seconds
At paper empty, required time from tray insert 
to the empty detection
Descent
Own weight descent
Dehumidification heater
Included in the service kit.
Power consumption
24.5W or lower
Power source
Supplied from main unit 
(DC24V  1A / DC5V  0.1A)
External dimensions
585x530x114 (mm)
Occupied dimensions
Weight
Approx. 11kg
Input
AC 100-127V / 220-240V (Two kinds)
Output
DC 24V 
Page of 44
Display

Download Sharp AR-D14 Service Manual (Repair Manual)

Here you can view online or download Sharp AR-D14 Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp AR-D14 Copying Equipment. Information contained in Sharp AR-D14 service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).