DOWNLOAD Sharp AR-C330 (serv.man4) Service Manual ↓ Size: 671.72 KB | Pages: 13 in PDF or view online for FREE

AR-PE3/PX5  - 4 -

20) Install the wire saddle, and pass two I/F cables through it and

fix them.

21) Attach the caution label for connection units to the edge of the

controller cover. (Europe only)

1) Turn on the power of the unit.

2) Enter the simulation 26-1 mode.

3) Press "PRN: AR-PE3" button. (Communication between the

unit and the printer controller is allowed.)

4) Cancel the simulation mode.

The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder.

The alphabet following the LF mark shows the kind of lead-free solder.

When repairing a lead-free solder PWB, use lead-free solder thread.

Never use conventional lead solder thread, which may cause a breakdown or an accident.

Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use
soldering iron is recommendable.

Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is
inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceed
the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is
confirmed.

Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.

If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after
completion of soldering work.

If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.

5mm

Lead-Free

Solder composition
code (Refer to the
table at the right.)

Solder composition

Sn-Ag-Cu

Sn-Ag-Bi
Sn-Ag-Bi-Cu

Sn-Zn-Bi

Sn-In-Ag-Bi

Sn-Cu-Ni

Sn-Ag-Sb

Bi-Sn-Ag-P
Bi-Sn-Ag

a

b

z

i

n

s

p

Solder composition code

a

q

CONTENTS

Because parts marked with "!" is indispensable for the machine safety maintenance and poeration, it must
Be replaced with the parts specific to the product specification.

This document has been published to be used for
after sales service only.
The contents are subject to change without ontice.

1  

Print controller power supply unit

2  

Packing material & Accessories

3  

DCDC PWB unit

 

■

    

Index

– 1 –

DEFINITION

The definition of each Rank is as follows and also noted in the list

Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)

Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with
the parts specific to the product specification.

F

Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.

F

Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.

F

For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

1

Print controller power supply unit

1

Print controller power supply unit

NO.

PARTS CODE

PRICE

RANK

NEW

MARK

PART

RANK

DESCRIPTION

1

R D E N C 0 0 3 5 F C Z Z

BL

N

E

Option PS unit(100V)

2

X B P S D 4 0 P 0 8 K 0 0

AA

C

Screw(4

×8K)

3

X H B S E 4 0 P 0 8 0 0 0

AA

C

Screw(4

×8)

4

P S H E P 5 3 0 6 F C Z Z

AK

N

C

Protect sheet

5

L S U P P 0 1 1 8 F C Z Z

AB

C

PWB supporter(SPLSN-6)

6

L P L T M 6 4 2 8 F C Z Z

AN

N

C

EFI PS fixing plate

7

D H A I - 3 6 1 1 F C Z Z

AU

N

C

Printer PS harness

8

X H B S D 4 0 P 0 8 0 0 0

AA

C

Screw(4

×8)

9

L D A I U 0 6 9 2 F C Z Z

AE

N

C

Cable fixing base

11

L B N D J 0 0 1 3 F C Z 1

AE

C

Wire band