Sharp AR-C262M (serv.man19) User Manual / Operation Manual ▷ View online
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
7
8
Click the [Standard installation] button.
9
The printers that are connected to the
network are found. Select the machine and
click the [Next] button.
network are found. Select the machine and
click the [Next] button.
If the machine is not found, make sure that the
machine is powered on and connected to your
computer and then search again. If the machine is
still not found, use the custom installation
procedure to directly specify the IP address (page
8).
machine is powered on and connected to your
computer and then search again. If the machine is
still not found, use the custom installation
procedure to directly specify the IP address (page
8).
10
A confirmation window will appear. Read
the contents and click the [Next] button.
the contents and click the [Next] button.
11
Select the printer driver being installed as
the default printer and click the [Next]
button.
the default printer and click the [Next]
button.
12
Check the contents of the window and
click the [Next] button.
click the [Next] button.
Installation of the printer driver begins.
13
When the finish setup window appears,
click the [OK] button.
click the [OK] button.
14
Click the [Close] button.
This completes the installation.
NOTE
When you are using Windows 2000/XP/Server
2003
If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.
2003
If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.
NOTE
A message prompting you to restart your computer
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.
!whaleII_inst_ex.book 7 ページ ２００４年９月１０日 金曜日 午前８時４８分
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
8
■
■
■
■ Installing the printer driver (custom installation)
The procedure for a custom installation of the printer driver is explained here. Select [Custom installation] if you
wish to install a display font or directly specify the IP address of the machine.
wish to install a display font or directly specify the IP address of the machine.
1
Insert the "Software CD-ROM" that
accompanied the machine into your CD-
ROM drive.
accompanied the machine into your CD-
ROM drive.
2
Click the [start] button, click [My
Computer], and then double-click the CD-
ROM icon.
Computer], and then double-click the CD-
ROM icon.
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer], and then double-click the CD-
ROM icon.
[My Computer], and then double-click the CD-
ROM icon.
3
Double-click the [SETUP] icon.
4
The Licence Agreement window will
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
5
After confirming the message in the
"Welcome" window, click the [Next]
button.
"Welcome" window, click the [Next]
button.
6
Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
the [Display Readme] button.
● If you wish to install the printer status monitor or the
Scanner driver, click the [Utility Software] button in
this window and then click the [Printer Status
Monitor] or [Scanner Driver] button and follow the
on-screen instructions.
If you installed the scanner driver, read the
separate supplementary manual after completing
installation.
this window and then click the [Printer Status
Monitor] or [Scanner Driver] button and follow the
on-screen instructions.
If you installed the scanner driver, read the
separate supplementary manual after completing
installation.
● If you wish to install the printer administration
utility, click the [Administrator Tools] button in this
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
7
Click the [Next] button.
8
Click the [Custom installation] button.
9
Select the [LPR Direct Print] and click the
[Next] button.
[Next] button.
10
The printers that are connected to the
network are found. Select the machine and
click the [Next] button.
network are found. Select the machine and
click the [Next] button.
If you wish to directly specify the IP address, click
the [Specify Address] button, enter the IP address,
and click the [Search] button.
Be sure to ask your network administrator for the
correct IP address to be entered.
the [Specify Address] button, enter the IP address,
and click the [Search] button.
Be sure to ask your network administrator for the
correct IP address to be entered.
11
A confirmation window will appear. Read
the contents and click the [Next] button.
the contents and click the [Next] button.
whale_inst_ex.fm 8 ページ ２００４年９月１６日 木曜日 午後３時４５分
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
9
12
Select the printer driver being installed as
the default printer and click the [Next]
button.
the default printer and click the [Next]
button.
13
When the printer name window appears,
click the [Next] button.
click the [Next] button.
If you wish to change the printer name, enter the
desired name.
desired name.
14
When you are asked if you wish to install
the display font, select an answer and
click the [Next] button.
the display font, select an answer and
click the [Next] button.
15
Check the contents of the window and
click the [Next] button.
click the [Next] button.
Installation of the printer driver begins.
16
When the finish setup window appears,
click the [OK] button.
click the [OK] button.
17
Click the [Close] button.
This completes the installation.
NOTE
When you are using Windows 2000/XP/Server
2003
If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.
2003
If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.
NOTE
A message prompting you to restart your computer
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.
!whaleII_inst_ex.book 9 ページ ２００４年９月１０日 金曜日 午前８時４８分
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
10
■
■
■
■ Using the machine as a shared printer via a server
If the printer server in a Windows NT server environment, NetWare server environment, or other environment
is configured to share the printer (the machine), follow the steps below to install the printer driver in each client
computer.
Ask your network administrator for the server name and printer name of the machine on the network.
is configured to share the printer (the machine), follow the steps below to install the printer driver in each client
computer.
Ask your network administrator for the server name and printer name of the machine on the network.
1
Perform steps 1 through 8 of "Installing
the printer driver (Custom installation)" on
page 8.
the printer driver (Custom installation)" on
page 8.
2
Select the [Shared Printer] and click the
[Next] button.
[Next] button.
3
When you are asked to select the printer
port to be used, click the [Add Network
Port] button.
port to be used, click the [Add Network
Port] button.
4
Select the network printer that is shared
and click the [OK] button.
and click the [OK] button.
Ask your network administrator for the server
name and printer name of the machine on the
network.
name and printer name of the machine on the
network.
5
In the printer port selection window, verify
the network printer that is shared and click
the [Next] button.
the network printer that is shared and click
the [Next] button.
6
When you are asked to select the model
name, select the model that you are using
and click the [Next] button.
name, select the model that you are using
and click the [Next] button.
7
Perform step 12 through 17 of "Installing
the printer driver (custom installation)" on
page 9.
the printer driver (custom installation)" on
page 9.
This completes the installation.
NOTE
For the procedure for configuring settings in the printer server, see the operating system manual or Help. The
"printer server" explained here is a computer that is connected to the machine, and "clients" are other computers
connected to the same network as the printer server.
For the procedure for configuring settings in the printer server, see the operating system manual or Help. The
"printer server" explained here is a computer that is connected to the machine, and "clients" are other computers
connected to the same network as the printer server.
!whaleII_inst_ex.book 10 ページ ２００４年９月１０日 金曜日 午前８時４８分
Click on the first or last page to see other AR-C262M (serv.man19) service manuals if exist.