Sharp AR-C260P (serv.man38) Service Manual / Technical Bulletin ▷ View online
CCE157
Sharp Electronics (UK) Ltd., Technical Services Group
2. The Toner Cartridge packaging has been changed so that the protection material does not contact directly
with the DV roller.
3. Of the 3 metal screws fixing the DC-PLT-U plate onto the toner cartridge, the front screw has changed to
a plastic one (All Toner Cartridges).
Action:
with the DV roller.
3. Of the 3 metal screws fixing the DC-PLT-U plate onto the toner cartridge, the front screw has changed to
a plastic one (All Toner Cartridges).
Action:
From the middle of January 2004 production.
How to Identify The New Type Toner Cartridge
As indicated below, a blue/yellow circle with a black dot label has been added to the long and short lateral
faces of the exterior packaging (2 circles for each box/package).
The identification label on the Aluminium Bag and Toner Cartridge will also display the production date:-
Procedure to Remove the Secondary Blade
1. Unfasten 2 black screws to remove DC-COV. (Figure1)
Cont’d
CCE157
Sharp Electronics (UK) Ltd., Technical Services Group
2. Unfasten 2 screws (M3*8) on both sides, and then unfasten 5 screws (M3*6). (Figure 2)
3. By removing DC-PLT-U, the 2nd Blade will be unfixed and can be removed.
4. Put back the DC-PLT-U to the original location, and then fasten the screws (M3*6) in order of number
(1 to 5) – starting from the left.
(1 to 5) – starting from the left.
Note:- Fastening screw torque=0.4±0.02N m
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
5. Fasten the 2 screws (M3*8) on both sides.
Note: Fastening screw torque=0.7±0.02N m
6. Hook the 4 cover pawls of the DC-COV, and then fasten it with 2 black screws.
CCE157
Sharp Electronics (UK) Ltd., Technical Services Group
2. Unfasten 2 screws (M3*8) on both sides, and then unfasten 5 screws (M3*6). (Figure 2)
3. By removing DC-PLT-U, the 2nd Blade will be unfixed and can be removed.
4. Put back the DC-PLT-U to the original location, and then fasten the screws (M3*6) in order of number
(1 to 5) – starting from the left.
(1 to 5) – starting from the left.
Note:- Fastening screw torque=0.4±0.02N m
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
5. Fasten the 2 screws (M3*8) on both sides.
Note: Fastening screw torque=0.7±0.02N m
6. Hook the 4 cover pawls of the DC-COV, and then fasten it with 2 black screws.
CCE157
Sharp Electronics (UK) Ltd., Technical Services Group
2. Unfasten 2 screws (M3*8) on both sides, and then unfasten 5 screws (M3*6). (Figure 2)
3. By removing DC-PLT-U, the 2nd Blade will be unfixed and can be removed.
4. Put back the DC-PLT-U to the original location, and then fasten the screws (M3*6) in order of number
(1 to 5) – starting from the left.
(1 to 5) – starting from the left.
Note:- Fastening screw torque=0.4±0.02N m
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U.
5. Fasten the 2 screws (M3*8) on both sides.
Note: Fastening screw torque=0.7±0.02N m
6. Hook the 4 cover pawls of the DC-COV, and then fasten it with 2 black screws.
Display