DOWNLOAD Sharp AR-C250 (serv.man8) Service Manual ↓ Size: 102.18 KB | Pages: 5 in PDF or view online for FREE

Model
AR-C250 (serv.man8)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
102.18 KB
Type
PDF
Document
FAQ
Brand
Device
Copying Equipment / Firmware Revision Table.
File
ar-c250-sm8.pdf
Date
PREV: Sharp AR-C250 (serv.man7) FAQ

Sharp AR-C250 (serv.man8) FAQ ▷ View online

BEAR FIRMWARE REVISION 
 
 
 
July 2004 
 
 
AR-C270 
 
Pre April 2003 Production Only 
ICU 
OPE 
PCU 
PCU 
Sub
 
Revision Made 
3.00 3.01 
3.01 
3.00 
•  Start of UK production. 
•  When the magnification/copy density screen is 
indicated, the interupt function is disabled (Patent). 
  
3.02 
 
•  Support for both AR-DW1 & AR-DW1N 
      (added Sim 44-43 – DV type check). 
  
3.03 
 
•  Amend the DV Correction table to correct magenta & 
cyan toner drop in low humidity conditions. 
  
3.04 
 
•  Card counter auditor control did not match with the 
total used sheets. 
 
 
3.07 
 
•  Supports AR-C19LD9 developer with AR-DW1N only 
(cyan & magenta toner drop prevention). 
 
 
AR-C270 
 
April 2003 Production Onwards 
ICU 
OPE 
PCU 
PCU 
Sub
 
Revision Made 
3.10 
3.01 
3.04 
3.00 
•  To support 4in1 LSU Type (1 polygon, 4 beam) 
 
Note: Do not upgrade existing machines using 4 
          individual LSU’s 
3.11 
 
 
 
•  Corrects ROM writing failure when using source card 
method.
 (4 in 1 LSU model only)
. 
 
 
3.07 
 
•  Supports AR-C19LD9 developer with AR-DW1N only 
(cyan & magenta toner drop prevention). 
 
 
BEAR FIRMWARE REVISION 
 
 
 
July 2004 
 
 
AR-DU2(N) 
Main Revision 
Made 
1.00 
•  Start of AB production 
 
 
 
2.05 
•  Start of AR-DU2N – supports AR-C160/270. 
 
 
AR-LC2(N) 
Main Revision 
Made 
2.00 
•  Start of AB production 
 
 
4.03 
•  Start of AR-LC2N – supports AR-C160/270. 
 
 
AR-RF1 
Main Revision 
Made 
 
 
 
C.11 
•  Start of AB Production 
 
 
AR-FN4 
Main Revision 
Made 
6.02 
•  Start of AB production 
7.01 
•  To prevent fuse F5 blowing when using test simulations. 
 
 
8.01 
•  To improve the motor torque for delivering the paper to the exit tray. 
 
 
AR-SS2 
Main Revision 
Made 
 
6.01 
•  Start of AB Production 
 
BEAR FIRMWARE REVISION 
 
 
 
July 2004 
 
 
AR-DU2(N) 
Main Revision 
Made 
1.00 
•  Start of AB production 
 
 
 
2.05 
•  Start of AR-DU2N – supports AR-C160/270. 
 
 
AR-LC2(N) 
Main Revision 
Made 
2.00 
•  Start of AB production 
 
 
4.03 
•  Start of AR-LC2N – supports AR-C160/270. 
 
 
AR-RF1 
Main Revision 
Made 
 
 
 
C.11 
•  Start of AB Production 
 
 
AR-FN4 
Main Revision 
Made 
6.02 
•  Start of AB production 
7.01 
•  To prevent fuse F5 blowing when using test simulations. 
 
 
8.01 
•  To improve the motor torque for delivering the paper to the exit tray. 
 
 
AR-SS2 
Main Revision 
Made 
 
6.01 
•  Start of AB Production 
 
BEAR FIRMWARE REVISION 
 
 
 
July 2004 
 
 
AR-DU2(N) 
Main Revision 
Made 
1.00 
•  Start of AB production 
 
 
 
2.05 
•  Start of AR-DU2N – supports AR-C160/270. 
 
 
AR-LC2(N) 
Main Revision 
Made 
2.00 
•  Start of AB production 
 
 
4.03 
•  Start of AR-LC2N – supports AR-C160/270. 
 
 
AR-RF1 
Main Revision 
Made 
 
 
 
C.11 
•  Start of AB Production 
 
 
AR-FN4 
Main Revision 
Made 
6.02 
•  Start of AB production 
7.01 
•  To prevent fuse F5 blowing when using test simulations. 
 
 
8.01 
•  To improve the motor torque for delivering the paper to the exit tray. 
 
 
AR-SS2 
Main Revision 
Made 
 
6.01 
•  Start of AB Production 
 
Page of 5
Display

Sharp AR-C250 (serv.man8) FAQ ▷ Download

Found More:

AR-C250 (serv.man8) Service Manuals

Preview DownloadPagesSize
AR-C250 (serv.man4) ARC150 250-Service Manual Service Manual 127 36.13 MB
AR-C250 (serv.man6) ARC250-Operation Manual User Manual / Operation Manual 127 4 MB
AR-C250 (serv.man5) ARC150-250-Parts Guide Service Manual / Parts Guide 94 5.87 MB
AR-C250 (serv.man56) Parts change to the paper feeding unit Service Manual / Technical Bulletin 1 32.78 KB
AR-C250 (serv.man67) Parts change information Service Manual / Technical Bulletin 2 62.72 KB
AR-C250 (serv.man66) Part change information Service Manual / Technical Bulletin 2 65.79 KB
AR-C250 (serv.man65) Discontinuance of the colour discrimination sheets used for the drum unit Service Manual / Technical Bulletin 4 28.56 KB
AR-C250 (serv.man64) Measure to alleviate problems of streaking from the paper delivery roller Service Manual / Technical Bulletin 4 194.17 KB
AR-C250 (serv.man63) Parts change information Service Manual / Technical Bulletin 1 31.18 KB
AR-C250 (serv.man62) Points of caution to be observed during service operations Service Manual / Technical Bulletin 1 20.58 KB
AR-C250 (serv.man61) Uniform usage of parts established Service Manual / Technical Bulletin 1 29.54 KB
AR-C250 (serv.man60) Change carried out in the fusing handle Service Manual / Technical Bulletin 1 29.33 KB
AR-C250 (serv.man59) Parts change (connection drive, harness guide plate, fusing upper frame, wire band) Service Manual / Technical Bulletin 1 30.38 KB
AR-C250 (serv.man58) Change carried out to the rotation control plate of the transfer unit Service Manual / Technical Bulletin 4 172.93 KB
AR-C250 (serv.man57) Establishment of the DV bias unit as a service part Service Manual / Technical Bulletin 1 23.07 KB
AR-C250 (serv.man70) Change of shape discontinuation of handle stay. Service Manual / Technical Bulletin 2 90.18 KB
AR-C250 (serv.man55) To maximise the copy quality output using full colour mode when copying and printing Service Manual / Technical Bulletin 5 78.56 KB
AR-C250 (serv.man54) Change carried out to the thermistor (fuser section) Service Manual / Technical Bulletin 1 21.1 KB
AR-C250 (serv.man53) Parts change information Service Manual / Technical Bulletin 1 30.74 KB
AR-C250 (serv.man52) Changes made in the resistance of the ICU-main PWB Service Manual / Technical Bulletin 1 30.42 KB
AR-C250 (serv.man50) Shading glass material change Service Manual / Technical Bulletin 1 32.95 KB
AR-C250 (serv.man49) Parts change - resist roller paper guide Service Manual / Technical Bulletin 1 32.72 KB
AR-C250 (serv.man48) Parts change - upper fuser cover Service Manual / Technical Bulletin 1 32.72 KB
AR-C250 (serv.man47) Modifications made to the CCD power Service Manual / Technical Bulletin 1 30.5 KB
AR-C250 (serv.man78) Change of colour correction table ROM. Service Manual / Technical Bulletin 2 87.16 KB
AR-C250 (serv.man100) Discontinuance of the colour discrimination sheets used for the drum unit Service Manual / Technical Bulletin 4 28.56 KB
AR-C250 (serv.man87) Change in form of supplied waste toner bottle. (WHITE) Service Manual / Technical Bulletin 1 72.55 KB
AR-C250 (serv.man86) Change of coupling paper drive unit. (WHITE) Service Manual / Technical Bulletin 1 88.54 KB
AR-C250 (serv.man85) Change from square tube to U-shaped plate in chassis unit. (WHITE) Service Manual / Technical Bulletin 2 88.93 KB
AR-C250 (serv.man84) Change to conform with IEC standard for lighting surge noise. (WHITE) Service Manual / Technical Bulletin 2 99.39 KB
AR-C250 (serv.man83) Change of materials for application roller gear. (WHITE) Service Manual / Technical Bulletin 1 83.65 KB
AR-C250 (serv.man82) Change of spring load for transfer separator PAWL unit. Service Manual / Technical Bulletin 1 80.27 KB
AR-C250 (serv.man81) Change of shape and discontinued parts for cushion used in toner duct. Service Manual / Technical Bulletin 2 116.51 KB
AR-C250 (serv.man80) Change of fixing screw for upper and lower frames of fusing unit. Service Manual / Technical Bulletin 1 87.89 KB
AR-C250 (serv.man79) Change of supplier for parts used in scanner unit and increase of noise margins. Service Manual / Technical Bulletin 1 74.07 KB
AR-C250 (serv.man68) Parts information. Service Manual / Technical Bulletin 2 95.04 KB
AR-C250 (serv.man77) Change of bushing materials. Service Manual / Technical Bulletin 1 72.6 KB
AR-C250 (serv.man76) Change of fusing delivery guide material. Service Manual / Technical Bulletin 1 73.34 KB
AR-C250 (serv.man75) Change of the ICU-LSU harness. Service Manual / Technical Bulletin 2 86.79 KB
AR-C250 (serv.man74) Change in shape of upper transport PG. Service Manual / Technical Bulletin 1 75.9 KB
AR-C250 (serv.man73) E7-11 error (Shading errors) corrections. Service Manual / Technical Bulletin 1 73.89 KB
AR-C250 (serv.man72) Change of paper delivery cabinet and paper delivery PG. Service Manual / Technical Bulletin 1 85.13 KB
AR-C250 (serv.man71) Discontinuation of toner hopper connector cover. Service Manual / Technical Bulletin 1 74.79 KB
AR-C250 (serv.man51) Part change - upper cleaner roller (fuser) Service Manual / Technical Bulletin 1 34 KB
AR-C250 (serv.man69) Change carried out in the ROM (Firmware). Service Manual / Technical Bulletin 9 311.64 KB
AR-C250 (serv.man45) Parts change information Service Manual / Technical Bulletin 1 13.3 KB
AR-C250 (serv.man16) 073-Countermeasure for toner falling From process unit. Service Manual / Technical Bulletin 5 1.07 MB
AR-C250 (serv.man17) 071-Parts change information Service Manual / Technical Bulletin 1 62.43 KB
AR-C250 (serv.man18) 070-Reduction of toner drop caused by deformation of the toner seal blade. Service Manual / Technical Bulletin 1 107.86 KB
AR-C250 (serv.man19) Change to the paper feed roller material. Service Manual / Technical Bulletin 13 1.22 MB
AR-C250 (serv.man20) 068-Parts change information AC sub PWB, Optical Unit, DV Drive plate, Process frame MC grid. Service Manual / Technical Bulletin 1 61.05 KB
AR-C250 (serv.man21) 067-Reducing Occurrences of flipping of the drum cleaning blade. Service Manual / Technical Bulletin 6 780.69 KB
AR-C250 (serv.man22) Addition of an application auxiliary sheet. Service Manual / Technical Bulletin 1 72.65 KB
AR-C250 (serv.man23) Enhancement of efficiency of oil bottle replacement. Service Manual / Technical Bulletin 1 125.86 KB
AR-C250 (serv.man24) Discontinuation of AR-C17LD9 Colour Developer Service Manual / Technical Bulletin 3 215.89 KB
AR-C250 (serv.man25) Drum drive unit part code change Service Manual / Technical Bulletin 2 621.6 KB
AR-C250 (serv.man26) Corrective action for drum mark detection failure Service Manual / Technical Bulletin 40.73 KB
AR-C250 (serv.man27) Part change information - LSU unit. Service Manual / Technical Bulletin 1 7.59 KB
AR-C250 (serv.man28) Oil-supply capability improvement Service Manual / Technical Bulletin 1 24.04 KB
AR-C250 (serv.man29) Part change information drum drive unit Service Manual / Technical Bulletin 1 14.89 KB
AR-C250 (serv.man30) Revised perts guide for the waste toner tank unit Service Manual / Technical Bulletin 2 50.67 KB
AR-C250 (serv.man32) Part guide corrections Service Manual / Technical Bulletin 2 38.86 KB
AR-C250 (serv.man31) Shape change to Application Sheet and Application Pipe Service Manual / Technical Bulletin 1 23.33 KB
AR-C250 (serv.man46) Action carried out to diminish the amount of toner that scatters from the DV unit Service Manual / Technical Bulletin 1 51.51 KB
AR-C250 (serv.man44) Preventive Maintenance Procedure Service Manual / Technical Bulletin 5 282.1 KB
AR-C250 (serv.man43) Measures to prevent clogging due to paper dust. Service Manual / Technical Bulletin 1 22.2 KB
AR-C250 (serv.man42) Manual feed part change information Service Manual / Technical Bulletin 2 37.35 KB
AR-C250 (serv.man41) Troubleshooting Copy Quality Service Manual / Technical Bulletin 12 167.67 KB
AR-C250 (serv.man40) DC power supply part change information Service Manual / Technical Bulletin 2 34.11 KB
AR-C250 (serv.man39) Front Exterior Door (Lower) Breaking Service Manual / Technical Bulletin 2 76.72 KB
AR-C250 (serv.man38) Introduction of AR-DW1N New Type Developer. Service Manual / Technical Bulletin 5 187.51 KB
AR-C250 (serv.man37) Exterior covers part change information Service Manual / Technical Bulletin 2 41.05 KB
AR-C250 (serv.man36) PCU main PWB part change information Service Manual / Technical Bulletin 1 14.57 KB
AR-C250 (serv.man35) Improvement for misalignment of the starting position of the scanning operation Service Manual / Technical Bulletin 1 15.37 KB
AR-C250 (serv.man34) Improvement for toner spatter Service Manual / Technical Bulletin 1 24.53 KB
AR-C250 (serv.man33) Part change information - CCD power supply cassette unit Service Manual / Technical Bulletin 1 26.25 KB
AR-C250 (serv.man11) AR-C250 PCU Firmware v4.07FN1 (Bear Cougar Tools). Upgrade details enclosed. Driver / Update 2.01 MB
AR-C250 (serv.man12) AR-C250 PCU Firmware v4.07d (Cougar Bear Tool) Driver / Update 2 MB
AR-C250 (serv.man13) AR-C250 ICU Firmware v4.02 (Cougar Bear Tool) Driver / Update 1.75 MB
AR-C250 (serv.man15) Flash 5.1 Download Utility (Cougar Tool) Driver / Update 16.94 KB
AR-C250 (serv.man14) AR-C250 OPE Firmware v4.01 (Cougar Bear Tool) Driver / Update 6.56 MB
AR-C250 (serv.man2) ARC150-330 Technical Update Handy Guide (Jun 05) Handy Guide 35 432.51 KB
AR-C250 (serv.man3) AR-C150-330 Peripheral Installation Handy Guide (Feb 05) Handy Guide 40 1.5 MB
AR-C250 ARC150-330 Handy Guide (Jun 05) Handy Guide 44 863.39 KB
AR-C250 (serv.man9) Paper Recommendations. FAQ 2 16.51 KB
AR-C250 (serv.man7) Colour Consumables Matrix for AR-C150 C160 C250 C270 C330. FAQ 5.66 KB
AR-C250 (serv.man10) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-C250 (serv.man88) MSDS (F-31316) for AR-C33DV9 (Cyan Developer) Regulatory Data 4 30.79 KB
AR-C250 (serv.man89) MSDS (F-31317) for AR-C33DV9 (Magenta Developer) Regulatory Data 4 30.79 KB
AR-C250 (serv.man90) MSDS (F-31318) for AR-C33DV9 (Yellow Developer) Regulatory Data 4 30.8 KB
AR-C250 (serv.man91) Fuser Oil MSDS F80961 Regulatory Data 2 10.14 KB
AR-C250 (serv.man92) Toner MSDS F00928 Regulatory Data 4 28.55 KB
AR-C250 (serv.man93) Toner MSDS F00927 Regulatory Data 4 28.59 KB
AR-C250 (serv.man94) Toner MSDS F00921 Regulatory Data 4 31.1 KB
AR-C250 (serv.man95) Developer MSDS F30921 Regulatory Data 2 16.11 KB
AR-C250 (serv.man96) Developer MSDS F30926 Regulatory Data 4 31.06 KB
AR-C250 (serv.man97) Developer MSDS F30927 Regulatory Data 4 31.04 KB
AR-C250 (serv.man98) Developer MSDS F30928 Regulatory Data 4 31.02 KB
AR-C250 (serv.man99) Environmental Data Sheet Regulatory Data 1 4.48 KB

RANDOM: