DOWNLOAD Sharp AR-C250 (serv.man55) Service Manual ↓ Size: 78.56 KB | Pages: 5 in PDF or view online for FREE

Model
AR-C250 (serv.man55)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
78.56 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / To maximise the copy quality output using full colour mode when copying and printing
File
ar-c250-sm55.pdf
Date

Sharp AR-C250 (serv.man55) Service Manual / Technical Bulletin ▷ View online

GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
7. 
Set the Half tone correction data to the default setting using Test Simulation 44-27.
8. 
Perform Auto Colour Calibration using Test Simulation 46-24.
If manual adjustments to colour balance are required, select "Service " mode.
Use Test Simulations 46-21 and 44-21 to make and store manual colour balance
settings after adjustment.
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
9. 
Using the Sharp Grey Chart (UKOG-0162FCZZ), adjust all exposure levels by
using Test Simulation 46-01 (colour) and 46-02 (BW) to the specification as shown
below.
10. 
Confirm density levels in all colour exposure modes by using the Sharp A3 Colour
Test Chart as shown below.
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
11. 
Re-calibrate the ARPE1 (if connected and installed) after all adjustments have been
completed.
NOTE: Failure to re-calibrate the ARPE1 Fiery Print Controller after modification will
result in inconsistent and poor copy quality, only when printing.
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
11. 
Re-calibrate the ARPE1 (if connected and installed) after all adjustments have been
completed.
NOTE: Failure to re-calibrate the ARPE1 Fiery Print Controller after modification will
result in inconsistent and poor copy quality, only when printing.
Page of 5
Display

Sharp AR-C250 (serv.man55) Service Manual / Technical Bulletin ▷ Download