DOWNLOAD Sharp AR-C170 (serv.man48) Service Manual ↓ Size: 4.72 MB | Pages: 96 in PDF or view online for FREE

Model
AR-C170 (serv.man48)
Pages
96
Size
4.72 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR-FX10 (Fax Option) Operation Manual when installed on AR-C170M or AR-C172M
File
ar-c170-sm48.pdf
Date

Sharp AR-C170 (serv.man48) User Manual / Operation Manual ▷ View online

ApollonII_fax_ex.book  6 ページ  2004年9月20日 月曜日 午後3時24分
1-1
CHAPTER 1
BEFORE USING THE FAX 
FEATURE
This chapter contains basic information about using the fax features of
this product. Please read this chapter before using the fax features.
Page
POINTS TO CHECK AND PROGRAM AFTER INSTALLATION..............1-2
CONNECTING AN EXTENSION PHONE ................................................1-2
CONNECTING AN EXTENSION PHONE ...................................... 1-2
A LOOK AT THE OPERATION PANEL ....................................................1-3
FAX MODE (CONDITION SETTINGS SCREEN)........................... 1-4
ORIGINALS ..............................................................................................1-6
ORIGINALS THAT CAN BE FAXED............................................... 1-6
LOADING A DOCUMENT.........................................................................1-7
USING THE REVERSING SINGLE PASS FEEDER ...................... 1-7
USING THE DOCUMENT GLASS.................................................. 1-7
CHECKING THE SIZE OF A LOADED ORIGINAL...................................1-8
MANUALLY SETTING THE SCANNING SIZE ............................... 1-8
SELECTING RESOLUTION AND EXPOSURE SETTINGS.....................1-9
SELECTING THE RESOLUTION ................................................... 1-9
SELECTING THE EXPOSURE....................................................... 1-10
CONVENIENT DIALING METHODS ........................................................1-11
ApollonII_fax_ex.book  1 ページ  2004年9月20日 月曜日 午後3時24分
1-2
POINTS TO CHECK AND PROGRAM
AFTER INSTALLATION
After installing the unit and before using it as a fax machine, check the following points and program the required
information.
■ Make sure the fax power switch is turned on
In addition to the machine power switch (see page 1-4 of the "Operation manual (for general information and
copier operation)"), the machine also has a fax power switch (see "Fax power switch" on page 0-4). When
using the machine, be sure to keep the fax power switch turned on at all times.
■ Make sure the correct date and time have been set
Make sure the correct date and time have been programmed in the unit (refer to page 2-13 of "Operation manual
(for general information and copier operation)"). If the date and time are wrong, please correct them.
It is important to set the correct date and time because they are used for such features as Timer Transmission
(page 3-4).
■ Program the sender's name and sender's number
The name and fax number of the user of the machine is programmed in "Own number and name set" (page
8-5) in the key operator programs.
The programmed name and number are printed at the top of each transmitted fax page. The sender's number
is also used as an identification number when you use the Polling function to request transmission from another
fax machine (See "USING THE POLLING FUNCTION" on page 3-6).
CONNECTING AN EXTENSION PHONE
You can connect a telephone to the machine and use it as an extension phone to place and receive calls like any normal
phone. When the other party has made the call, the extension phone can be used to activate fax reception. (remote
operation)
CONNECTING AN EXTENSION PHONE
1
Insert the end of the extension phone cord
into the extension phone socket on the
rear of the machine.
Make sure you hear a
"click" sound indicating
that the cord is securely
connected.
NOTES
You can check your programmed name and number by printing out the Sender List. (Refer to "PRINTING OUT
SETTINGS" page 8-12.)
NOTES
If you connect a combination telephone/answering machine to the machine, you will not be able to use the
answering machine function.
You can place calls from the phone even during a power failure.
Extension
phone
socket
NOTE
In  New Zealand, not all standard telephones and
answering machines will respond to incoming
ringing when connected to the extension socket of
the equipment.
ApollonII_fax_ex.book  2 ページ  2004年9月20日 月曜日 午後3時24分
1-3
1
A LOOK AT THE OPERATION PANEL
The operation panel used for the fax function is described below.
Touch panel (following page)
• Messages and keys appear on the touch panel.
Key input is accomplished by touching the keys.
• When a key in the touch panel is touched, a beep
sounds and the key is highlighted.
• Keys that cannot be selected in a screen are
greyed out. If touched, a double-beep will sound
to alert you that the key cannot be selected.
Mode select keys (page 2-2)
Use these keys to change modes.
[IMAGE SEND] key
Press to switch to fax mode. The initial screen of
fax mode will appear.
When the network scanner option is installed,
touch this key to return to the initial screen of fax
mode or scanner mode, whichever mode was
selected last. (Pressing the [IMAGE SEND] key in
a copy screen or printer screen returns you to the
initial screen of fax mode.) To switch to the initial
screen of fax mode from the initial screen of
scanner mode, touch the [SCANNER/FAX] key
(see 
 on page 1-4).
Numeric keys
Use to enter fax numbers, sub-addresses,
passcodes, and numerical settings. (See
"MEMORY BOXES AND
SUB-ADDRESSES/PASSCODES REQUIRED
FOR F-CODE TRANSMISSION
" on page 4-2.)
On the model for Singapore, alphabets are
described on each numeric key.
[C] key (clear key)
Use to clear a mistake when entering fax numbers,
sub-addresses, passcodes, and numerical
settings. One digit is cleared each time you press
the key.
When an original is being scanned, this key can
also be used to cancel scanning.
[CA] key (clear all key)
Use to cancel a transmission or programming
operation. When this key is pressed, the operation
is cancelled and you return to the initial screen
described on the following page.
This key is also used to cancel a resolution, paper
size, or special function setting that was selected
when sending a fax.
[
] key (page 5-4)
This is used to produce tone signals when you are
on a pulse dial line.
[BLACK COPY START] key (page 2-3)
Press to begin scanning an original for fax
transmission.
[COLOUR COPY START] key
Not used when using the machine as a fax
machine. (For information on this key, see page
1-8 of the "Operation manual (for general
information and copier operation)".)
1
2
3
4
5
6
9
7
8
1
2
3
8
4
5
6
7
8
9
NOTE
For the names and functions of the parts of the machine, see page 1-4 of the "Operation manual (for general
information and copier operation)".
Whale_01.fm  3 ページ  2004年10月15日 金曜日 午前9時41分
Page of 96
Display

Click on the first or last page to see other AR-C170 (serv.man48) service manuals if exist.