DOWNLOAD Sharp AR-C150 (serv.man70) Service Manual ↓ Size: 311.64 KB | Pages: 9 in PDF or view online for FREE

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

* The Exposure Mode is set to [Automatic] when the machine returns to initial status after carrying out

registration of any of the following for the Original Document Mode: [Text/Printed Photo], [Text/Photo], or
[Text]. In all other cases, the Exposure Mode is set to [Manual]. (In addition to the three Original Document
Modes, Exposure Mode is set to [Manual] after registration of Copy Original Document Mode has been
carried out.)

(2) [Paper] Selection.

Window

* Optional Paper Tray/LCC Status (Level 1/5).

(3) [Copy Ratio] Selection.

* The Copy Ratio display is blank when the Setting Palette is opened.

Window

* The copy ratio is displayed in the display window when the Copy Ratio key is selected. (The window shows

the display when a copy ratio of 100% has been selected.)

Window

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

(4) [2-Sided Copy] Selection.

* OC Model. (If the [2-Sided Copy] key is depressed when the 2-Sided Module is not installed, the following

window is displayed.)

Window

* Touching the Mode Key reverses the display.

* DF Model. (If the [2-Sided Copy] key is depressed when the 2-Sided Module is not installed, the following

window is displayed.)

Window.

* Touching the Mode Key reverses the display.

(5) [Output] Selection.

* When the AR-SS2 is installed.

Window.

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

Window.

* Touching the Mode Key reverses the display.

* Changes in the settings during initial status are possible after mode cancellation has been carried out by

the CA Key during Auto-Clear operations and after the power supply has been turned ON.

* Registration of special modes, operation guide, copy interrupt, and no. of copies is not enabled. (The

warning signal will sound if the function key is touched while registration is not enabled.)

* If the ADU status is set to Not Installed or Use Prohibited when S --> D or D --> D mode is registered as the

initial status, S --> S mode is set as the default.

* If the RADF status is set to Not Installed or Use Prohibited when D --> D or D --> S mode is registered as

the initial status, S --> S mode is set as the default.

* If [Return to the Factory Default Settings] is selected, the Factory Settings are immediately set as the Copy

Mode Initial Status.

* If [Return to the Factory Default Settings] is selected when the LCC is installed, the LCC is set as the

selection tray default.

* If [Return to the Factory Default Settings] is selected when the LCC is not installed, Tray 1 is set as the

selection tray default.

* Due to the fact that the initial factory settings of the machine are stored in the ROM, changes cannot be

written in.

(6) P 38: Transfer Belt Position Setting

* Color, or Black & White can be set for the Transfer Belt Position.
* Default: Color (When the settings window is opened, however, both "Color" and "Black & White" are displayed

as not being selected. The previous settings are not displayed.)

* The following events will return the machine to the home position.

a. Initialization operations after the power supply is turned ON.
b. The CA key is ON.
c. Auto-Clear.

Window

* All setting selections on the settings palette are displayed as not being selected. (The previous settings are

not displayed.)

* After either "Color" or "Black & White" has been selected, the OK Key will record the setting data in the

memory. If the OK Key is depressed, the display will return to the Key Operator Function Settings Menu.

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

* If the [CA] Key is depressed after either "Color" or "Black & White" has been selected, the Key Operator

Mode is cancelled without recording the setting data in the memory.

* If the OK Key is not depressed after either "Color" or "Black & White" has been selected, the display will

return to the Key Operator Function Settings Menu. (The previous settings will still be in effect.)

2. ADDITIONS OF NEW COLOR BALANCE ADJUSTMENTS CARRIED OUT FOR SPECIAL STATUS.

Settings Procedures.

* In models AR-C150/250, the "Color Balance" in the Key Operator Programs is written to the special modes so

that color balance and adjustments status can be job-registered on the user level.

* Touching the [Color Balance] Key (newly established) on the Color Adjustments Menu displays the Color

Balance Settings Window.

Window display.

* The indicator display of the Colour Balance Adjustments Window reflects the colour balance adjustment

status of the Key Operator.

* The adjustment status set by the colour balance of the Key Operator is the standard position, which is

displayed by the darkened indicators. (The [OK] Key is darkened when the machine is set to Standard.) The
current adjustment position is displayed by the highlighted indicators. As a result, during normal, machine
stand-by status, the standard position and the current adjustment position will be the same status display.

Window display

* The window displayed above shows a case whereby the colour balance of the Special Modes has been

opened when the colour balance adjustments of the Key Operator have not been adjusted (default status).

Window display.

* The window displayed above shows a case whereby the colour balance of the Special Modes has been

opened when the colour balance adjustments of the Key Operator have been carried out.