DOWNLOAD Sharp AR-651 (serv.man58) Service Manual ↓ Size: 46.83 KB | Pages: 8 in PDF or view online for FREE

Model
AR-651 (serv.man58)
Pages
8
Size
46.83 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ROM upgrading (4)
File
ar-651-sm58.pdf
Date

Sharp AR-651 (serv.man58) Service Manual / Technical Bulletin ▷ View online

ARE543
Sharp Electronics (UK) Ltd., Technical Services Group
Model AR-651/810
Description
ROM Upgrading (4)
After upgrading to this ROM, perform "08-690" to initialize the HDD.
If the HDD is not initialized, F10 error will occur.
1) By initializing the HDD, the following information will be erased.
Stored data by "Filing"
Stored data by "Image composition"
2) When installing AR-P15, the following information will be erased as well.
Storage Job
Private Job
User information and Template information of Private Scan
Histories of Print and Scan
From July 2003 production
ROM
System ROM
UI ROM
Main ROM
Laser
ROM
Scanner
ROM
PFC ROM
RADF ROM
Version
009
009
009
13
08
08
07
03
Changed problems
1) In RADF mixed paper size mode, in the case of copying with the combination such as LT-R and
2) In paper discharging with the finisher, Shift process was changed not papers which were
discharged among jobs not to go over.
3) When setting the magazine sort and Nin1, the display showed wrong magnification for the selected
paper.
4) Glazing stripe in the image due to grease of the cleaning roller was improved.
ROM UPGRADING …(4)
TECHNICAL BULLETIN
Date:
11 November 2003
Model: 
AR651 / AR810
Ref.:
002
Colour: White
Page:
1 of 8
ARE543
Sharp Electronics (UK) Ltd., Technical Services Group
Spec change
1) 08 codes for controlling the temperature of the pressure roller were added.
(08-844-846 were added)
2) When a sheet is not set in the manual feed tray, the icon will be gray out in fear of
touching the icon of the manual feed tray in the special menu. (In the case of using the
manual feed tray, the setting is performed after putting the sheet, therefore if there is no
sheet on the tray, the manual feed tray related setting are now cannot be changed in
order to prevent the mis-operation.)
3) 08 code for canceling the input number limit of continued original icon in a copy job
using RADF was added. (In 08-333 parameter, 2 was added)
4) In the case of copying with a cassette set as for the special paper, the cassette will be
out of target of auto cassette switch.
Note) These have been included from the version combination above-mentioned or later.
Addition and change to [Service hand book] following this upgrading.
1. Change of the setting mode (08)
Setting mode (08)
Cod
e
Name
Defau
lt
Acceptable
value
Contents
Before
chang
e
0
0^1
0:9 times  1:4 times
333
Continued original
input number of
time
After
chang
e
0
0^2
0:9 times  1:4 times
2 Unlimited
2. Addition of the setting mode(08)
Setting mode (08)
Cod
e
Items adjusted
Target
Functio
ns
Defaul
t
Accept
able
value
Contents
Operati
ng
Procedu
re
844
Transition time
of low speed
pre-run in
Ready
(Pressure
roller)
ALL
7
0^12
0:Invalid  1:5 min.  2:10
min. 3:20 min.  4:30 min.
5:40 min. 6:50 min.  7:60
min.  8:70 min. 9:80 min.
10:90 min.  11:100 min.
12:120 min.
845
Starting
temperature of
low speed pre-
run in Ready
(Pressure
roller)
(When "08-
844" is valid)
ALL
9
0^16
0:50   1:55   2:60
3:65  4:70   5:75
6:80   7:85  8:90
9:95   10:100  11:105
12:110   13:115
14:120   15:125
16:130
846
Stopping
temperature of
low speed pre-
run in Ready
(Pressure
roller) (When
"08-844" is
valid)
ALL
5
0^9
0:+5   1:+10   2:+15
3:+20   4:+25   5:+30
6:+35   7:+40   8:+45
9:+50
1
ARE543
Sharp Electronics (UK) Ltd., Technical Services Group
Current parts
New parts
Ref.
No.
Model
name
Version
P/G
No.
Parts code
Parts code
Price
rank
Parts name
Effective
time
Inter-
chang
e-
ability
Note
201-
15
0N6LA07749500
SYSTEM
ROM 009R1
201-
16
0N6LA07751500
SYSTEM ROM
009R2
201-
17
0N6LA07752500
BW
UI ROM 009
201-
11
0N6LA07737800
MAIN ROM 13
201-
12
0N6LA07738500
SCANNER
ROM 08
201-
13
0N6LA07739500
BN
LASER ROM
08
201-
14
0N6LA07740400
BR
PFC ROM 07
AR-651
AR-810
ALL
201-
18
---
0N6LA14813000
BT RADF ROM 03
2003/7
3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
ROM Upgrade (3)
From March 2003 production
ROM
System ROM
UI ROM
Main ROM
Laser
ROM
Scanner
ROM
PFC ROM
RADF ROM
Version
007
007
007
11
07
07
07
02
Corrected Problem
In the printer mode, the image problem due to the availability of smoothing function was corrected.
Spec Change
1) In the scale setting screen, the interval between the icon for [scale down] / [scale up] and the icon for [25%] /
[200%] was narrow and it was difficult for each user to press it, so the interval between two icons were
changed.
2) In Italian version, the expression of Saddle Stitch was changed. [CUCITURA SELLA] 
 [PINZATURA
SELLA][FASCIC. RIVISTA & CUCIT.SELLA] 
 [FASCIC. RIVISTA & PINZ.SELLA]
3) When [0] is set for 08-204, the setting was changed so that the Auto Clear function is disabled.
4) AR-P15 Controller for each language version: the LCD indication [Reset the Printer.] was changed to
[Reboot the Printer.]
5) In the Italian version, the word [SetItem] in Italian was changed as follows to correct the localized
word.[mposta element] 
 [Imposta elemento]
[Note] These have been included from the version combination above-mentioned or later.
ARE543
Sharp Electronics (UK) Ltd., Technical Services Group
ROM Upgrade (2)
From December 2002 production
ROM
System ROM
UI ROM
Main ROM
Laser
ROM
Scanner
ROM
PFC ROM
RADF ROM
Version
006
006
006
10
07
07
07
02
Corrected Problems
1) [Media Type] is selected for all cassettes, so the machine does not find an appropriate cassette if the print job is
sent from the Controller, and then the message is indicated on LCD.  This message was changed as follows:
Before Change: [Please insert the cassette with correct size: <paper size>]
   
After Change: [Please place the paper to the manual feeder: <paper size>]
In the area <paper size> above, the actual paper size like [A4] is indicated.
2) After rebooted, the machine is automatically placed online.
3) The limits were placed on the characters used for the scanned file name.
4) The wording [Password Change] was changed to [Password Setting].
5) The wording [Reset] was changed to [Reboot].
6) If [Saddle] and [Cover Page (Inserter)] are selected, the paper in the inserter is reversed.
7) The range of time out setting for the parallel port was changed.
8) In the serial copying operation immediately after 05-code, the developer was not correctly fused.  This was
corrected.
9) The problem of the web motor signal channel (CD5) was not correctly detected.
This was corrected.
Spec Change
 1) The maximum limit of a binding margin (right or left) was changed from 30mm to 40mm.
 2) The following settings were added for user setting: - Punching Mode Select function for the paper with tab.
- Tab / Shift Width Setting (for cassette)
- Tab / Shift Width Setting (for manual feeder)
- Reverse Mode Select function for the paper in the inserter
- Original Orientation Select function in duplex mode (to reversed direction)
- Simple Menu Indication Select function
- Initial Menu Indication Select function (The user can select the simple menu as a basic screen page.)
 3) The maximum numbers of account control code were changed from 150 to 500.
 4) The combination with the binding margin (right or left) and the saddle stitch is enabled.
 5) Some were changed and added for 05 and 08 codes. Regarding the details, please refer to [5. Maintenance
Report: Revised Information, Service Handbook].
 6) To reduce the wrong detection of recycle toner transport motor (CD2), the control system was added.
 7) The control method was added to eliminate the paper jam when the inserter tray is opened.
 8) Some setting value when the engine NVRAM is all cleared was changed.
 9) The control method was changed so that the frequency of C44 error is reduced under low temperature.
10) To prevent the creeping state of Pressure Roller, the control method was added so that every three hundred
times when IH is on/off, the fuser unit is rotated for 10 seconds.
11) To prevent the guide jam from occurring when the paper for Tandem LCF is transferred, the check control
system was added.
12)*The input check control system was added for the middle transfer sensor.
13) The control system was changed so that the leading edge of the image is not shifted when the scale is
changed.
14) *To achieve the higher image quality, dithering is added for the photo mode.
15) *To prevent the original glass from being contaminated, the control method was added so that the scanned
position of the original can be changed when the original is transferred.
16) The recovery process was added when the error is experienced during beam initialization.
Note) - Regarding the details about three items indicated with [*], please refer to [5. Maintenance Report: Revised
Information, Service Handbook].
[Note] These have been included from the version combination above-mentioned or later.
Page of 8
Display

Sharp AR-651 (serv.man58) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-651 (serv.man58) Service Manual ↓ Size: 46.83 KB | Pages: 8 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-651 (serv.man58) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-651 (serv.man58) Copying Equipment. Information contained in Sharp AR-651 (serv.man58) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.