Sharp AR-651 (serv.man19) Service Manual ▷ View online
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 85
[H] Platen guide
(1) Remove 2 screws fixing the platen guide.
(2) Move the platen guide toward the direction of
the white arrow until the right side edge of
the guide can be seen.
(3) Remove the platen guide toward the direction
of the white arrow.
Platen guide
(2)
(3)
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 86
[I] Mylar and mirror seal
(I-1) Mirror seal for original length sensor
Ref.
Ref.
0 ~ 0.5 mm
0 ~ 0.5 mm
Upper guide
Mylar
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 87
Ref.
0 ~ 0.5 mm
Platen outside guide
(I-2) Mylar for read sensor
Mylar
Attach the mylar
passing through the
guide window to
prevent twisting and
too strong contact on
the edge of the guide
window.
Attach the mylar aligning
the edge of it with the
corner end of the guide.
Positioning the mylar
other than from the
corner end of the guide is
not allowed.
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 88
Ref.
0 ~ 0.5 mm
(I-3) Mirror seal for large original exit sensor
Large original
exit guide
Ref.
Mirror seal
Attach the mirror seal
aligning the double-
sided tape edge with
the guide window
edge.
Double-sided tape
must not be out of the
guide window edge.
Double-sided tape on
the back
Attach the mirror seal
passing through the
guide window to
prevent twisting and
too strong contact on
the edge of the guide
window.
Click on the first or last page to see other AR-651 (serv.man19) service manuals if exist.