Sharp AR-5320E (serv.man19) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
Permanent measures against leading edge
misalignment, etc. due to feed delay during duplex
printing
1. Model Name AR-M165/M205/M207,
AR-5316/5320
2. Description
The base plate manufactured in Thailand has ribs on the edge of the transport section.
Therefore, the paper's leading edge touches those ribs, and it may cause leading edge
misalignment or jam. To fix this problem, PS guide sheets for guiding the paper's
leading edge had been added to the multi frame cover guide located just in front of the
base plate. (Refer to T/R No. DCE-691.)
Recently the shape of the base plate manufactured in Thailand was changed to match
that produced in China (no ribs on the edge of the transport section).
As a result of this change, the PS guide sheets (4 pcs) attached to the multi frame
cover guide was disused.
3. Action
Executed from the middle of production in May, 2008
TECHNICAL BULLETIN
Date:
30/06/2008
Model:
See 1 Below
Ref.:
DCE713
Colour:
White
Page:
1 of 2
Sharp Electronics (UK) Ltd., Document Systems Support
Current parts
New parts
No
Model
name
Versio
n
P/G
No.
Parts code
Parts code
Price
rank
Q'ty
Parts
name
Effec-
tive
time
Inter-
change
-
ability
Note
11 -12
12 -22
13 -12
14 -22
9 -12
10 -22
GDAI-0002QSE1 GDAI-0002QSE2 BF 1
Base
plate
1
AR-M165
AR-M206
AR-M207
AR-M206
AR-M207
AR-M207E
AR-M205
AR-5316
AR-5320
AR-5320
AL-2080
ALL
13 -
15 -
11 -
PSHEZ0605QSZZ - -
-
PS guide
sheet
Mid-
'08/5
5
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones
for maintaining the safety and performance of the set.
for maintaining the safety and performance of the set.
Display