AR-5132 (serv.man107). Preventing Paper Jams when Feeding from Duplex (caused by excessive paper curl) (PREVIOUSLY SENT OUT AS FF COP 073) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
AR-5132 (serv.man107)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
29.52 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Preventing Paper Jams when Feeding from Duplex (caused by excessive paper curl) (PREVIOUSLY SENT OUT AS FF COP 073)
File
ar-5132-sm107.pdf
Date

View Sharp AR-5132 (serv.man107) Technical Bulletin online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :
SF-2030
Ref : FF/COP/073
Date : 03/12/98
   
SF-2040
AR-5132
Subject :
Preventing Paper Jams When Feeding From Duplex
(caused by excessive  paper curl).
SYMPTOM 1 (Jam at Fusing Front) (All Above Models)
Symptom :-
Paper with the edges curled upwards (
) may catch the fusing cover, or touch
the upper heat roller, causing a jam at the fusing front.
Action :-
If this problem occurs add the FUSING GUIDE SHEET to guide the curled
paper into the fuser section and also, change the GUIDE COVER (P/G 19-67
for SF-2030, P/G 18-67 for SF-2040 & P/G 16-67 for AR-5132) to the new
shaped item. INSERT THESE ITEMS ON THE FRONT FRAME SIDE
ONLY
 (SEE BELOW FOR FITTING INSTRUCTIONS). Factory action has
been taken since September 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
N/A
PSHEP4506FCZZ
Fusing Guide Sheet
AE
PCOVP1160FCZZ
PCOVP1160FCZ1
Guide Cover
AK
 Page 1 of 2
SYMPTOM 2 (Paper corner folded at fusing front / paper jam) (SF-2030/40)
Symptom :-
Paper with the edges curled upwards (
) to a great extent may touch the PC
SENSOR PROTECT SHEET (P/G 17-78 for SF-2030 & P/G 16-78 for    
SF-2040) and is folded at this side of the lead edge, or it may cause a paper
jam before entering the fuser.
Action :-
The PC SENSOR PROTECT SHEET has changed to that used in the        
AR-5132. Factory action has been taken from August 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
PSHEP4128FCZZ
PSHEP4453FCZZ
PC Sensor Protect Sheet
AC
SYMPTOM 3 (Paper Jam Caused When Re-feeding from ADU) (All Above Models)
Symptom :-
) it will,
sometimes, not re-feed due to the resistance of the paper lead edge.
Action :-
The diameter of the CLUTCH SPRING (P/G 41-35 for SF-2030, P/G 42-35
for SF-2040 & P/G 33-35 for AR-5132) has been reduced to improve the
transporting ability of the pick-up roller. Factory action has been taken since
April 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
MSPRC1006FCZZ MSPRC2714FCZZ
Clutch Spring
AC
NOTE:
The above modifications will ONLY be effective if the
paper curl is less than 30mm. It will not be effective on
extremely large paper curl.
If paper jams due to paper curl continue, please be
advised that the copy paper may be contributing to the
problem.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
SYMPTOM 2 (Paper corner folded at fusing front / paper jam) (SF-2030/40)
Symptom :-
Paper with the edges curled upwards (
) to a great extent may touch the PC
SENSOR PROTECT SHEET (P/G 17-78 for SF-2030 & P/G 16-78 for    
SF-2040) and is folded at this side of the lead edge, or it may cause a paper
jam before entering the fuser.
Action :-
The PC SENSOR PROTECT SHEET has changed to that used in the        
AR-5132. Factory action has been taken from August 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
PSHEP4128FCZZ
PSHEP4453FCZZ
PC Sensor Protect Sheet
AC
SYMPTOM 3 (Paper Jam Caused When Re-feeding from ADU) (All Above Models)
Symptom :-
) it will,
sometimes, not re-feed due to the resistance of the paper lead edge.
Action :-
The diameter of the CLUTCH SPRING (P/G 41-35 for SF-2030, P/G 42-35
for SF-2040 & P/G 33-35 for AR-5132) has been reduced to improve the
transporting ability of the pick-up roller. Factory action has been taken since
April 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
MSPRC1006FCZZ MSPRC2714FCZZ
Clutch Spring
AC
NOTE:
The above modifications will ONLY be effective if the
paper curl is less than 30mm. It will not be effective on
extremely large paper curl.
If paper jams due to paper curl continue, please be
advised that the copy paper may be contributing to the
problem.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
SYMPTOM 2 (Paper corner folded at fusing front / paper jam) (SF-2030/40)
Symptom :-
Paper with the edges curled upwards (
) to a great extent may touch the PC
SENSOR PROTECT SHEET (P/G 17-78 for SF-2030 & P/G 16-78 for    
SF-2040) and is folded at this side of the lead edge, or it may cause a paper
jam before entering the fuser.
Action :-
The PC SENSOR PROTECT SHEET has changed to that used in the        
AR-5132. Factory action has been taken from August 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
PSHEP4128FCZZ
PSHEP4453FCZZ
PC Sensor Protect Sheet
AC
SYMPTOM 3 (Paper Jam Caused When Re-feeding from ADU) (All Above Models)
Symptom :-
) it will,
sometimes, not re-feed due to the resistance of the paper lead edge.
Action :-
The diameter of the CLUTCH SPRING (P/G 41-35 for SF-2030, P/G 42-35
for SF-2040 & P/G 33-35 for AR-5132) has been reduced to improve the
transporting ability of the pick-up roller. Factory action has been taken since
April 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
MSPRC1006FCZZ MSPRC2714FCZZ
Clutch Spring
AC
NOTE:
The above modifications will ONLY be effective if the
paper curl is less than 30mm. It will not be effective on
extremely large paper curl.
If paper jams due to paper curl continue, please be
advised that the copy paper may be contributing to the
problem.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
SYMPTOM 2 (Paper corner folded at fusing front / paper jam) (SF-2030/40)
Symptom :-
Paper with the edges curled upwards (
) to a great extent may touch the PC
SENSOR PROTECT SHEET (P/G 17-78 for SF-2030 & P/G 16-78 for    
SF-2040) and is folded at this side of the lead edge, or it may cause a paper
jam before entering the fuser.
Action :-
The PC SENSOR PROTECT SHEET has changed to that used in the        
AR-5132. Factory action has been taken from August 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
PSHEP4128FCZZ
PSHEP4453FCZZ
PC Sensor Protect Sheet
AC
SYMPTOM 3 (Paper Jam Caused When Re-feeding from ADU) (All Above Models)
Symptom :-
) it will,
sometimes, not re-feed due to the resistance of the paper lead edge.
Action :-
The diameter of the CLUTCH SPRING (P/G 41-35 for SF-2030, P/G 42-35
for SF-2040 & P/G 33-35 for AR-5132) has been reduced to improve the
transporting ability of the pick-up roller. Factory action has been taken since
April 1998 production.
OLD PART No.
NEW PART No.
DESCRIPTION
PRICE RANK
MSPRC1006FCZZ MSPRC2714FCZZ
Clutch Spring
AC
NOTE:
The above modifications will ONLY be effective if the
paper curl is less than 30mm. It will not be effective on
extremely large paper curl.
If paper jams due to paper curl continue, please be
advised that the copy paper may be contributing to the
problem.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.

Download Sharp AR-5132 (serv.man107) Technical Bulletin

Here you can view online or download Sharp AR-5132 (serv.man107) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp AR-5132 (serv.man107) Copying Equipment. Information contained in Sharp AR-5132 (serv.man107) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).