Sharp AR-405 (serv.man6) Service Manual ▷ View online
(6) Offset
Tray available
Bottom tray
Offset amount
25mm
(7) Power source
Power source
Supplied from the copier (DC 24V/DC 25)
(8) Power consumption
Max. power consumption
About 60W
(9) External view
Dimensions
590 (W)
×
560 (D)
×
998 (H)
Box color
Frosty gray
Weight
About 45kg
(10) Staple functions
Stable available
Bottom stage tray only
Face up only
Stapling
capacity
capacity
50 sheets (60g/m
2
)
(25 sheets for sizes greater than A4/8.5
×
11)
Sizes available
for stapling
for stapling
AB series
A3, B4, A4, A4R, B5, B5R
Inch series
11
×
17, 8.5
×
14, 8.5
×
13, 8.5
×
11, 8.5
×
11R
Alignment
(when stapling)
(when stapling)
Max. shift: within 1mm
Stapling
reference
reference
One position (Left rear), One position (Left
front), 2 positions (left side)
front), 2 positions (left side)
Stapler supply
Cartridge (5,000 pcs.)
Stapler
SF-SC11 (The staple cartridge case is supplied
as a service part.)
as a service part.)
Detection
Staple empty detection, no cartridge detection
Manual staple
mode
mode
Not available
I. Dual tray output unit AR-TR1
(1) Capacity
No. of bins
2 trays
Capacity
Upper stage
250 sheets
Lower stage
100 sheets
(2) Paper transport/paper exit
Paper transport
Center reference
Face up
(3) Paper exit tray
Tray
Mode
Paper
Upper stage
Copy, printer
A3 ~ A6R
(11"
(11"
×
17" ~ 8.5
×
5.5")
Lower stage
Printer, interruption
copy
copy
A3 ~ A5
(11"
(11"
×
17" ~ 8.5
×
5.5")
(4) Power
Supplied by the copier (DC 24V)
(5) Weight
3.3 kg
J. AR-PB2
(1) General Specification
PS Specification
Platform
IBM PC/AT (or compatible)
Support OS
(Printer Drivers)
(Printer Drivers)
Custom
and PPD
and PPD
Windows 3.1/WfW3.11 (No PPD)
Windows 95/98
Windows NT 4.0
Windows 95/98
Windows NT 4.0
PDL
Emulation
Emulation
PCL5e-compatible
PostScript Level 2-Compatible
Hex Dump
PostScript Level 2-Compatible
Hex Dump
CPU
R4700 (64bit RISC / 150MHz)
Memory
Standard
16MB
Maximum
80MB (32MB SIMM x 2 + 16MB)
Slot
2 Slots (16MB / 32MB SIMM can
be attached)
be attached)
Resident Fonts
For PS
Type1: 35 fonts (Latin fonts)
For PCL
Intellifont : 35 fonts
TrueType : 10 fonts
Line Printer
Stroke Font
TrueType : 10 fonts
Line Printer
Stroke Font
Interface
IEEE1284 parallel port: 1 port
Port supports Compatible mode
(with PnP on Windows95/98).
Port supports Compatible mode
(with PnP on Windows95/98).
Extend Interface
1 Network slot on printer board.
NIC can be attached here.
NIC can be attached here.
NIC Support
DPI1.10Base-T/2 (AR-NC1D)
Port Selection
Automatic Switch or
Fix to each port
Fix to each port
Emulation Switching
Automatic Switch or
Fix to each emulation
Fix to each emulation
PnP Support
Support on Windows95/98
AR-405
1/21/1999
3 – 4
(6) Offset
Tray available
Bottom tray
Offset amount
25mm
(7) Power source
Power source
Supplied from the copier (DC 24V/DC 25)
(8) Power consumption
Max. power consumption
About 60W
(9) External view
Dimensions
590 (W)
×
560 (D)
×
998 (H)
Box color
Frosty gray
Weight
About 45kg
(10) Staple functions
Stable available
Bottom stage tray only
Face up only
Stapling
capacity
capacity
50 sheets (60g/m
2
)
(25 sheets for sizes greater than A4/8.5
×
11)
Sizes available
for stapling
for stapling
AB series
A3, B4, A4, A4R, B5, B5R
Inch series
11
×
17, 8.5
×
14, 8.5
×
13, 8.5
×
11, 8.5
×
11R
Alignment
(when stapling)
(when stapling)
Max. shift: within 1mm
Stapling
reference
reference
One position (Left rear), One position (Left
front), 2 positions (left side)
front), 2 positions (left side)
Stapler supply
Cartridge (5,000 pcs.)
Stapler
SF-SC11 (The staple cartridge case is supplied
as a service part.)
as a service part.)
Detection
Staple empty detection, no cartridge detection
Manual staple
mode
mode
Not available
I. Dual tray output unit AR-TR1
(1) Capacity
No. of bins
2 trays
Capacity
Upper stage
250 sheets
Lower stage
100 sheets
(2) Paper transport/paper exit
Paper transport
Center reference
Face up
(3) Paper exit tray
Tray
Mode
Paper
Upper stage
Copy, printer
A3 ~ A6R
(11"
(11"
×
17" ~ 8.5
×
5.5")
Lower stage
Printer, interruption
copy
copy
A3 ~ A5
(11"
(11"
×
17" ~ 8.5
×
5.5")
(4) Power
Supplied by the copier (DC 24V)
(5) Weight
3.3 kg
J. AR-PB2
(1) General Specification
PS Specification
Platform
IBM PC/AT (or compatible)
Support OS
(Printer Drivers)
(Printer Drivers)
Custom
and PPD
and PPD
Windows 3.1/WfW3.11 (No PPD)
Windows 95/98
Windows NT 4.0
Windows 95/98
Windows NT 4.0
PDL
Emulation
Emulation
PCL5e-compatible
PostScript Level 2-Compatible
Hex Dump
PostScript Level 2-Compatible
Hex Dump
CPU
R4700 (64bit RISC / 150MHz)
Memory
Standard
16MB
Maximum
80MB (32MB SIMM x 2 + 16MB)
Slot
2 Slots (16MB / 32MB SIMM can
be attached)
be attached)
Resident Fonts
For PS
Type1: 35 fonts (Latin fonts)
For PCL
Intellifont : 35 fonts
TrueType : 10 fonts
Line Printer
Stroke Font
TrueType : 10 fonts
Line Printer
Stroke Font
Interface
IEEE1284 parallel port: 1 port
Port supports Compatible mode
(with PnP on Windows95/98).
Port supports Compatible mode
(with PnP on Windows95/98).
Extend Interface
1 Network slot on printer board.
NIC can be attached here.
NIC can be attached here.
NIC Support
DPI1.10Base-T/2 (AR-NC1D)
Port Selection
Automatic Switch or
Fix to each port
Fix to each port
Emulation Switching
Automatic Switch or
Fix to each emulation
Fix to each emulation
PnP Support
Support on Windows95/98
AR-405
1/21/1999
3 – 4
(6) Offset
Tray available
Bottom tray
Offset amount
25mm
(7) Power source
Power source
Supplied from the copier (DC 24V/DC 25)
(8) Power consumption
Max. power consumption
About 60W
(9) External view
Dimensions
590 (W)
×
560 (D)
×
998 (H)
Box color
Frosty gray
Weight
About 45kg
(10) Staple functions
Stable available
Bottom stage tray only
Face up only
Stapling
capacity
capacity
50 sheets (60g/m
2
)
(25 sheets for sizes greater than A4/8.5
×
11)
Sizes available
for stapling
for stapling
AB series
A3, B4, A4, A4R, B5, B5R
Inch series
11
×
17, 8.5
×
14, 8.5
×
13, 8.5
×
11, 8.5
×
11R
Alignment
(when stapling)
(when stapling)
Max. shift: within 1mm
Stapling
reference
reference
One position (Left rear), One position (Left
front), 2 positions (left side)
front), 2 positions (left side)
Stapler supply
Cartridge (5,000 pcs.)
Stapler
SF-SC11 (The staple cartridge case is supplied
as a service part.)
as a service part.)
Detection
Staple empty detection, no cartridge detection
Manual staple
mode
mode
Not available
I. Dual tray output unit AR-TR1
(1) Capacity
No. of bins
2 trays
Capacity
Upper stage
250 sheets
Lower stage
100 sheets
(2) Paper transport/paper exit
Paper transport
Center reference
Face up
(3) Paper exit tray
Tray
Mode
Paper
Upper stage
Copy, printer
A3 ~ A6R
(11"
(11"
×
17" ~ 8.5
×
5.5")
Lower stage
Printer, interruption
copy
copy
A3 ~ A5
(11"
(11"
×
17" ~ 8.5
×
5.5")
(4) Power
Supplied by the copier (DC 24V)
(5) Weight
3.3 kg
J. AR-PB2
(1) General Specification
PS Specification
Platform
IBM PC/AT (or compatible)
Support OS
(Printer Drivers)
(Printer Drivers)
Custom
and PPD
and PPD
Windows 3.1/WfW3.11 (No PPD)
Windows 95/98
Windows NT 4.0
Windows 95/98
Windows NT 4.0
PDL
Emulation
Emulation
PCL5e-compatible
PostScript Level 2-Compatible
Hex Dump
PostScript Level 2-Compatible
Hex Dump
CPU
R4700 (64bit RISC / 150MHz)
Memory
Standard
16MB
Maximum
80MB (32MB SIMM x 2 + 16MB)
Slot
2 Slots (16MB / 32MB SIMM can
be attached)
be attached)
Resident Fonts
For PS
Type1: 35 fonts (Latin fonts)
For PCL
Intellifont : 35 fonts
TrueType : 10 fonts
Line Printer
Stroke Font
TrueType : 10 fonts
Line Printer
Stroke Font
Interface
IEEE1284 parallel port: 1 port
Port supports Compatible mode
(with PnP on Windows95/98).
Port supports Compatible mode
(with PnP on Windows95/98).
Extend Interface
1 Network slot on printer board.
NIC can be attached here.
NIC can be attached here.
NIC Support
DPI1.10Base-T/2 (AR-NC1D)
Port Selection
Automatic Switch or
Fix to each port
Fix to each port
Emulation Switching
Automatic Switch or
Fix to each emulation
Fix to each emulation
PnP Support
Support on Windows95/98
AR-405
1/21/1999
3 – 4
(6) Offset
Tray available
Bottom tray
Offset amount
25mm
(7) Power source
Power source
Supplied from the copier (DC 24V/DC 25)
(8) Power consumption
Max. power consumption
About 60W
(9) External view
Dimensions
590 (W)
×
560 (D)
×
998 (H)
Box color
Frosty gray
Weight
About 45kg
(10) Staple functions
Stable available
Bottom stage tray only
Face up only
Stapling
capacity
capacity
50 sheets (60g/m
2
)
(25 sheets for sizes greater than A4/8.5
×
11)
Sizes available
for stapling
for stapling
AB series
A3, B4, A4, A4R, B5, B5R
Inch series
11
×
17, 8.5
×
14, 8.5
×
13, 8.5
×
11, 8.5
×
11R
Alignment
(when stapling)
(when stapling)
Max. shift: within 1mm
Stapling
reference
reference
One position (Left rear), One position (Left
front), 2 positions (left side)
front), 2 positions (left side)
Stapler supply
Cartridge (5,000 pcs.)
Stapler
SF-SC11 (The staple cartridge case is supplied
as a service part.)
as a service part.)
Detection
Staple empty detection, no cartridge detection
Manual staple
mode
mode
Not available
I. Dual tray output unit AR-TR1
(1) Capacity
No. of bins
2 trays
Capacity
Upper stage
250 sheets
Lower stage
100 sheets
(2) Paper transport/paper exit
Paper transport
Center reference
Face up
(3) Paper exit tray
Tray
Mode
Paper
Upper stage
Copy, printer
A3 ~ A6R
(11"
(11"
×
17" ~ 8.5
×
5.5")
Lower stage
Printer, interruption
copy
copy
A3 ~ A5
(11"
(11"
×
17" ~ 8.5
×
5.5")
(4) Power
Supplied by the copier (DC 24V)
(5) Weight
3.3 kg
J. AR-PB2
(1) General Specification
PS Specification
Platform
IBM PC/AT (or compatible)
Support OS
(Printer Drivers)
(Printer Drivers)
Custom
and PPD
and PPD
Windows 3.1/WfW3.11 (No PPD)
Windows 95/98
Windows NT 4.0
Windows 95/98
Windows NT 4.0
PDL
Emulation
Emulation
PCL5e-compatible
PostScript Level 2-Compatible
Hex Dump
PostScript Level 2-Compatible
Hex Dump
CPU
R4700 (64bit RISC / 150MHz)
Memory
Standard
16MB
Maximum
80MB (32MB SIMM x 2 + 16MB)
Slot
2 Slots (16MB / 32MB SIMM can
be attached)
be attached)
Resident Fonts
For PS
Type1: 35 fonts (Latin fonts)
For PCL
Intellifont : 35 fonts
TrueType : 10 fonts
Line Printer
Stroke Font
TrueType : 10 fonts
Line Printer
Stroke Font
Interface
IEEE1284 parallel port: 1 port
Port supports Compatible mode
(with PnP on Windows95/98).
Port supports Compatible mode
(with PnP on Windows95/98).
Extend Interface
1 Network slot on printer board.
NIC can be attached here.
NIC can be attached here.
NIC Support
DPI1.10Base-T/2 (AR-NC1D)
Port Selection
Automatic Switch or
Fix to each port
Fix to each port
Emulation Switching
Automatic Switch or
Fix to each emulation
Fix to each emulation
PnP Support
Support on Windows95/98
AR-405
1/21/1999
3 – 4
Display