Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ View online
7-1
CHAPTER
7
CHAPTER 7
OPTIONAL EQUIPMENT
This chapter describes operating instructions for the Finisher (AR-FN1N,
AR-FN2), Large Capacity Tray (AR-LC1), Stand/500-sheet Paper Drawer
(AR-DE1N) and Dual Tray Output Unit (AR-TR1).
AR-FN2), Large Capacity Tray (AR-LC1), Stand/500-sheet Paper Drawer
(AR-DE1N) and Dual Tray Output Unit (AR-TR1).
Page
●
●
●
●
●
SYSTEM CONFIGURATION
..........................
7-2
●
●
●
●
●
FINISHER (AR-FN1N)
..............................
7-3
Part names
......................................
7-3
Specifications
.....................................
7-3
Offset stack
......................................
7-4
Sort and group
....................................
7-5
Staple sort
.......................................
7-6
Staple cartridge replacement
.........................
7-10
Staple jam removal
................................
7-12
Misfeed removal
..................................
7-14
●
●
●
●
●
FINISHER (AR-FN2)
...............................
7-19
Part names
.....................................
7-19
Specifications
....................................
7-19
Offset stack
.....................................
7-20
Sort and group
...................................
7-21
Staple sort
......................................
7-22
Staple cartridge replacement
.........................
7-26
Staple jam removal
................................
7-27
Misfeed removal
..................................
7-28
●
●
●
●
●
LARGE CAPACITY TRAY (AR-LC1)
...................
7-30
Part names
.....................................
7-30
Specifications
....................................
7-30
Loading copy paper
...............................
7-31
Misfeed removal
..................................
7-32
●
●
●
●
●
STAND/500-SHEET PAPER DRAWER (AR-DE1N)
........
7-34
Part names
.....................................
7-34
Specifications
....................................
7-34
Loading copy paper
...............................
7-35
Misfeed removal
..................................
7-36
●
●
●
●
●
DUAL TRAY OUTPUT UNIT (AR-TR1)
.................
7-37
Part names
.....................................
7-37
Specifications
....................................
7-38
7-2
CHAPTER
7
SYSTEM CONFIGURATION
The options which are available for this copier are shown below.
OPTIONAL EQUIPMENT
System configuration
Large capacity tray (AR-LC1)
Finisher (AR-FN1N)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Exit tray
(AR-TE1)
(AR-TE1)
Finisher (AR-FN2)
Dual tray output unit
(AR-TR1)
(AR-TR1)
7-3
CHAPTER
7
FINISHER (AR-FN1N)
The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and
the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the
previous set.
the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the
previous set.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
●
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size A3 (11” x 17”) paper.
onto size A3 (11” x 17”) paper.
Specifications
PART NAMES
Finisher release lever
Top tray
Second tray
(not used in the copy mode)
(not used in the copy mode)
Stapler unit
Paper transport area cover
Paper feed area cover
Top cover
Offset tray
When copying onto size A3 (11” x
17”) paper, lower the metal support
located at the tip of the offset tray.
17”) paper, lower the metal support
located at the tip of the offset tray.
Tray capacity
Top tray:
500 sheets
Second tray: 500 sheets
Offset tray:
Offset tray:
1,500 sheets (A4 (8-1/2" x 11"))
750 sheets (larger than A4 (8-1/2" x 11"))
750 sheets (larger than A4 (8-1/2" x 11"))
Paper size
Top tray:
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Second tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray:
Offset tray:
A4 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight
Top tray:
52 to 128
g
/m
2
(14 lbs. to 34 lbs.) (when face up)
64 to 105
g
/m
2
(17 lbs. to 28 lbs.) (when face down)
Second tray: 64 to 105
g
/m
2
(17 lbs. to 28 lbs.)
Offset tray:
64 to 128
g
/m
2
(17 lbs. to 34 lbs.) (when face up)
64 to 105
g
/m
2
(17 lbs. to 28 lbs.) (when face down)
For paper weighing more than 105
g
/m
2
(28 lbs.), A4
(8-1/2" x 11") is the maximum size.
Offset
30 mm (1.2 inch)
Paper size
A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
for stapling
Stapling capacity
50 sheets (80
g
/m
2
(21 lbs.))
(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") paper)
Power supply
Drawn from the copier
Weight
Approx. 50 k
g
(111 lbs.)
Dimensions
590 mm (W) x 560 mm (D) x 998 mm (H)
(23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H))
Specifications are subject to change for improvement without notice.
Click on the first or last page to see other AR-405 (serv.man32) service manuals if exist.