Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ View online
6-8
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
COPIER
Type
Desktop
Copy system
Dry, electrostatic transfer system
Originals
Sheets, bound documents
Original feed system
Reversing automatic document
feeder (RADF)
feeder (RADF)
Original sizes
Max. A3 (11" x 17")
Copy sizes
Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
Image loss:
Image loss:
Max. 5 mm (13/64") (both leading and trailing edges)
Max. 5 mm (13/64") (along all other edges in total)
Max. 5 mm (13/64") (along all other edges in total)
For paper weight, see page 4-2.
Copying speed
40 copies/min. (A4 (8-1/2" x 11"))
(at 100% copy ratio)
27 copies/min. (A4R (8-1/2" x 11"R))
24 copies/min. (B4 (8-1/2" x 14"))
19 copies/min. (A3 (11" x 17"))
24 copies/min. (B4 (8-1/2" x 14"))
19 copies/min. (A3 (11" x 17"))
Continuous copy
Max. 999 copies; subtractive counter
First-copy time
Approx. 4.5 sec.
Warm-up time
Approx. 75 sec.
Copy ratio
Variable: 25 to 400% in 1% increments, total 376 steps
(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%,
200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%,
200%, 400%)
(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%,
200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%,
200%, 400%)
Exposure system
Document glass:
Moving optical source
(stationary platen) with automatic
exposure function
(stationary platen) with automatic
exposure function
Copy paper feed
Two paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability
one bypass tray with 50-sheet automatic feed capability
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Xenon lamp
Resolution
Scan:
400 dpi
Output: 600 dpi
Gradation
Scan:
256 levels
Output: 2 levels (normal copying)
Required power supply
Local voltage ±10% (For this copier’s power supply requirements,
see the name plate located on the left hand side at the rear corner of
the copier.)
see the name plate located on the left hand side at the rear corner of
the copier.)
6-9
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
DUPLEX MODULE
Paper type
Ordinary paper only
Number of copies
1 (trayless system)
Copy paper size
A5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Copy paper weight
56 to 105
g
/m
2
(15 lbs. to 28 lbs.)
Specifications are subject to change for improvement without notice.
DOCUMENT FEEDER
Type
Reversing automatic document feeder
(RADF)
(RADF)
Acceptable originals
Single-sided originals:
50 to 128
g
/m
2
(14 to 34 lbs.)
Weight:
Two-sided originals:
50 to 128
g
/m
2
(14 to 34 lbs.)
for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals.
50 to 110
50 to 110
g
/m
2
(14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")
originals.
Size:
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity:
Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals
provided the total aggregate thickness does not exceed 6.5 mm or 1/4"
(50 to 80
(50 to 80
g
/m
2
(14 to 20 lbs.)) or 5 mm or 3/16" (80 to 128
g
/m
2
(21 to 34
lbs.))
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
Power consumption
Max. 1.85 kW
Overall dimensions
1292 mm (W) x 700 mm (D) (50-7/8" (W) x 27-9/16" (D))
Weight
Approx. 98 k
g
(217 lbs.)
Copier dimensions
600 mm (W) x 700 mm (D) x 750 mm (H)
(23-5/8" (W) x 27-9/16" (D) x 29-17/32" (H))
(23-5/8" (W) x 27-9/16" (D) x 29-17/32" (H))
Operating conditions
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity:
Humidity:
20% to 85%
Optional equipment
Finisher (AR-FN1N, AR-FN2)
Large capacity tray (AR-LC1)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
Large capacity tray (AR-LC1)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
7-1
CHAPTER
7
CHAPTER 7
OPTIONAL EQUIPMENT
This chapter describes operating instructions for the Finisher (AR-FN1N,
AR-FN2), Large Capacity Tray (AR-LC1), Stand/500-sheet Paper Drawer
(AR-DE1N) and Dual Tray Output Unit (AR-TR1).
AR-FN2), Large Capacity Tray (AR-LC1), Stand/500-sheet Paper Drawer
(AR-DE1N) and Dual Tray Output Unit (AR-TR1).
Page
●
●
●
●
●
SYSTEM CONFIGURATION
..........................
7-2
●
●
●
●
●
FINISHER (AR-FN1N)
..............................
7-3
Part names
......................................
7-3
Specifications
.....................................
7-3
Offset stack
......................................
7-4
Sort and group
....................................
7-5
Staple sort
.......................................
7-6
Staple cartridge replacement
.........................
7-10
Staple jam removal
................................
7-12
Misfeed removal
..................................
7-14
●
●
●
●
●
FINISHER (AR-FN2)
...............................
7-19
Part names
.....................................
7-19
Specifications
....................................
7-19
Offset stack
.....................................
7-20
Sort and group
...................................
7-21
Staple sort
......................................
7-22
Staple cartridge replacement
.........................
7-26
Staple jam removal
................................
7-27
Misfeed removal
..................................
7-28
●
●
●
●
●
LARGE CAPACITY TRAY (AR-LC1)
...................
7-30
Part names
.....................................
7-30
Specifications
....................................
7-30
Loading copy paper
...............................
7-31
Misfeed removal
..................................
7-32
●
●
●
●
●
STAND/500-SHEET PAPER DRAWER (AR-DE1N)
........
7-34
Part names
.....................................
7-34
Specifications
....................................
7-34
Loading copy paper
...............................
7-35
Misfeed removal
..................................
7-36
●
●
●
●
●
DUAL TRAY OUTPUT UNIT (AR-TR1)
.................
7-37
Part names
.....................................
7-37
Specifications
....................................
7-38
Click on the first or last page to see other AR-405 (serv.man32) service manuals if exist.