DOWNLOAD Sharp AR-405 (serv.man32) Service Manual ↓ Size: 1.33 MB | Pages: 80 in PDF or view online for FREE

Model
AR-405 (serv.man32)
Pages
80
Size
1.33 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR405 Operation Manual-Section 3
File
ar-405-sm32.pdf
Date

Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ View online

6-6
CHAPTER
6
USER MAINTENANCE
The document glass and the document cover (RADF transport belt)
must be kept clean to avoid dirty areas from being copied onto the
copies.
Document glass and document cover
Wipe the document glass and the document cover
(RADF transport belt) with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.
GENERAL INFORMATION
User maintenance
6-7
CHAPTER
6
TOUCH PANEL CONTRAST ADJUSTMENT
The contrast of the touch panel can be adjusted as below.
1
Press the CUSTOM SETTINGS (
) key.
2
Press the “DISPLAY CONTRAST” key on the touch
panel.
3
Press the “LIGHTER” or “DARKER” key to adjust the
contrast.
4
Press the “OK” key.
ETTINGS
 
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
GENERAL INFORMATION
Touch panel contrast adjustment
TTINGS
ONTRAST
LIGHTER
DARKER
TER
OK
DARKER
6-8
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
COPIER
Type
Desktop
Copy system
Dry, electrostatic transfer system
Originals
Sheets, bound documents
Original feed system
Reversing automatic document
feeder (RADF)
Original sizes
Max. A3 (11" x 17")
Copy sizes
Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
Image loss:
Max. 5 mm (13/64") (both leading and trailing edges)
Max. 5 mm (13/64") (along all other edges in total)
For paper weight, see page 4-2.
Copying speed
40 copies/min. (A4 (8-1/2" x 11"))
(at 100% copy ratio)
27 copies/min. (A4R (8-1/2" x 11"R))
24 copies/min. (B4 (8-1/2" x 14"))
19 copies/min. (A3 (11" x 17"))
Continuous copy
Max. 999 copies; subtractive counter
First-copy time
Approx. 4.5  sec.
Warm-up time
Approx. 75 sec.
Copy ratio
Variable: 25 to 400% in 1% increments, total 376 steps
(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%,
200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%,
200%, 400%)
Exposure system
Document glass:
Moving optical source
(stationary platen) with automatic
exposure function
Copy paper feed
Two paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Xenon lamp
Resolution
Scan:
400 dpi
Output: 600 dpi
Gradation
Scan:
256 levels
Output: 2 levels (normal copying)
Required power supply
Local voltage ±10% (For this copier’s power supply requirements,
see the name plate located on the left hand side at the rear corner of
the copier.)
6-9
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
DUPLEX MODULE
Paper type
Ordinary paper only
Number of copies
1 (trayless system)
Copy paper size
A5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Copy paper weight
56 to 105 
g
/m
(15 lbs. to 28 lbs.)
Specifications are subject to change for improvement without notice.
DOCUMENT FEEDER
Type
Reversing automatic document feeder
(RADF)
Acceptable originals
Single-sided originals:
50 to 128 
g
/m
(14 to 34 lbs.)
Weight:
Two-sided originals:
50 to 128 
g
/m
(14 to 34 lbs.)
for A5 and A4 (5-1/2" x  8-1/2" and 8-1/2" x 11") originals.
50 to 110 
g
/m
2
 (14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")
originals.
Size:
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity:
Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and  8-1/2" x 11") originals
provided the total aggregate thickness does not exceed 6.5 mm or 1/4"
(50 to 80 
g
/m
(14 to 20 lbs.)) or 5 mm or 3/16" (80 to 128 
g
/m
2
 (21 to 34
lbs.))
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
Power consumption
Max. 1.85 kW
Overall dimensions
1292 mm (W) x 700 mm (D) (50-7/8" (W) x 27-9/16" (D))
Weight
Approx. 98 k
g
 (217 lbs.)
Copier dimensions
600 mm (W) x 700 mm (D) x 750 mm (H)
(23-5/8" (W) x 27-9/16" (D) x 29-17/32" (H))
Operating conditions
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity:
20% to 85%
Optional equipment
Finisher (AR-FN1N, AR-FN2)
Large capacity tray (AR-LC1)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
Page of 80
Display

Click on the first or last page to see other AR-405 (serv.man32) service manuals if exist.