DOWNLOAD Sharp AR-405 (serv.man32) Service Manual ↓ Size: 1.33 MB | Pages: 80 in PDF or view online for FREE

Model
AR-405 (serv.man32)
Pages
80
Size
1.33 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR405 Operation Manual-Section 3
File
ar-405-sm32.pdf
Date
PREV: Sharp AR-405 (serv.man31) User Manual / Operation Manual

Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ View online

6-2
CHAPTER
6
PART NAMES AND FUNCTIONS
Exterior
Exit area cover
Open to remove misfed paper.
Power switch
Press to turn copier power on and off.
Exit tray (optional)
Finished copies are deposited in the exit tray.
Operation panel
All copier controls are located here for easy
operation.
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
RADF feeding roller cover
Open to remove misfed originals.
Original guides
Adjust to the size of the originals.
Document feeder tray
Holds up to 50 originals.
RADF exit area
Finished originals are output here.
RADF exit roller cover
Open to remove misfed originals.
Paper trays
Each tray holds 500 sheets of paper.
Front cover
Open to remove misfeeds and to service the
copier.
Handles
Right side cover
Open to remove misfeeds in the paper feed area.
Toner collecting container cover
Open to replace the toner collecting container.
Document glass
All originals which cannot be copied from the
RADF must be copied here.
Paper clip tray
Keep paper clips here.
GENERAL INFORMATION
Part names and functions
6-3
CHAPTER
6
PART NAMES AND FUNCTIONS
Interior
GENERAL INFORMATION
Part names and functions
Bypass tray paper guides
Adjust to the width of the copy paper.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Fusing unit
The fusing unit is hot. Exercise care in this area.
Transport lever
Turn to open the transport section.
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Corona unit
The unit is used to charge the photoconductive
drum.
Toner hopper
Contains toner.
Roller rotating knobs
Turn to remove misfed paper.
Paper guide
Push down to remove misfed paper.
Accessories
Operation manual . . . . . . . . . . . . . . . . . . . . .  1
Toner collecting containers
(including 1 pre-installed at the factory) . . . . .  3
6-4
CHAPTER
6
PART NAMES AND FUNCTIONS
Operation Panel
LCD touch panel
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
10-key pad
Used to set the copy quantity.
INTERRUPT (
) key and indicator (p. 2-20)
Interrupts a copy run.
CLEAR ALL (
CA
) key
Clears all selected settings and returns the copier
to the initial settings.
COPY key
Press during standby to display the total output
count.
AUDIT CLEAR (
) key
Closes an open account.
PROGRAM (
P
) key (p. 2-18)
Press to select the job memory mode.
CLEAR (
C
) key
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
START (
) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
SPECIAL MODES key (p.3-1)
Press to select special functions.
Message display
Messages are displayed regarding copier status
and operation.
Paper size display
The sizes of loaded copy paper are displayed and
the selected paper feed location is highlighted.
 indicates the amount of copy paper.
Copy quantity display
Displays the specified number of copies.
Original size display
The original paper size is displayed.
INFORMATION (
) key (p. 1-7)
Press for operation guidance on use of various
features of this copier.
Press for guidance when a misfeed occurs, when
adding toner, or when used toner must be
disposed of.
GENERAL INFORMATION
Part names and functions
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
CA
CLEAR ALL
START
PRINT
COPY
DATA
ON LINE
The key and indicators 
are not used for the 
copier features.
6-5
CHAPTER
6
PART NAMES AND FUNCTIONS
CUSTOM SETTINGS (
) key
Press to set key operator programs or adjust the
contrast of the touch panel.
2-SIDED COPY key
Press to select the 1-sided to 1-sided, 1-sided to
2-sided, 2-sided to 1-sided or 2-sided to 2-sided
copy mode.
OUTPUT key
Press to select the finisher mode: SORT or
GROUP.
EXPOSURE display
Indicates the selected exposure mode.
EXPOSURE key (p. 2-16)
Press to select the exposure mode: AUTO,
TEXT, TEXT/PHOTO, or PHOTO.
PAPER SELECT display
Displays the selected paper size. When “AUTO”
is displayed, paper size matching the original and
copy ratio will be automatically selected.
PAPER SELECT key
Press to select the desired paper tray.
COPY RATIO display
Displays the copy ratios for reductions or
enlargements.
COPY RATIO key
Press to select a reduction or enlargement copy
ratio or select the automatic copy ratio selection
mode.
REVIEW (
) key
Press to check the settings of selected functions.
Initial settings
The copier assumes the initial settings when the
CLEAR ALL (
CA
) key is pressed and approximately 1
minute after the last copy is made in any mode.
Except for the paper tray selection, the copier also
assumes the initial setting when it is turned on.
●
Copy ratio:  100%
●
Automatic exposure
●
Copy quantity:  0
●
All special copier modes are set to off.
●
Tray select:  Paper tray 1 (At power on, the
previously selected tray will again be selected.)
Optional large capacity tray will be selected when
installed.
★ KEY OPERATOR
Initial settings can be
programmed as desired. The auto clear time can also
be changed. See pages 8-17 and 8-21.
GENERAL INFORMATION
Part names and functions
Touch Panel (Basic screen)
READY TO COPY. 
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1. A4
2. A3
A4
ORIGINAL
A4R
Page of 80
Display

Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp AR-405 (serv.man32) Service Manual ↓ Size: 1.33 MB | Pages: 80 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp AR-405 (serv.man32) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-405 (serv.man32) Copying Equipment. Information contained in Sharp AR-405 (serv.man32) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

AR-405 (serv.man32) Service Manuals

Preview DownloadPagesSize
AR-405 (serv.man3) AR405-Circuit Diagrams Service Manual 28 14.14 MB
AR-405 (serv.man4) AR405 Service Manual-General Service Manual 7 217.75 KB
AR-405 (serv.man5) AR405 Service Manual-Specifications Service Manual 6 66.04 KB
AR-405 (serv.man6) AR405 Service Manual-Options Service Manual 5 56.78 KB
AR-405 (serv.man7) AR405-Service Manual-Consumable Parts Service Manual 7 67.77 KB
AR-405 (serv.man8) AR405 Service Manual-External View and Internal Structure Service Manual 9 389.07 KB
AR-405 (serv.man9) AR405 Service Manual-Setting and Adjustments Service Manual 18 693.07 KB
AR-405 (serv.man10) AR405 Service Manual-Simulation Codes Service Manual 85 924.36 KB
AR-405 (serv.man11) AR405 Service Manual-Maintenance Service Manual 28 3.93 MB
AR-405 (serv.man12) AR405 Service Manual-Disassembly and Assembly Service Manual 12 1.28 MB
AR-405 (serv.man13) AR405 Service Manual-Trouble Code List Service Manual 12 79.48 KB
AR-405 (serv.man30) AR405 Operation Manual-Section 1 User Manual / Operation Manual 34 695.89 KB
AR-405 (serv.man31) AR405 Operation Manual-Section 2 User Manual / Operation Manual 64 1.52 MB
AR-405 (serv.man14) Information of parts change Service Manual / Parts Guide 2 28.25 KB
AR-405 (serv.man15) Parts Guide AR250 280 285 287 335 337 405 407 505 507 Service Manual / Parts Guide 127 5.15 MB
AR-405 (serv.man16) AR405 Parts Guide-Exteriors Operation Panel Unit Document Size Sensor Unit Service Manual / Parts Guide 5 416.79 KB
AR-405 (serv.man17) AR405 Parts Guide-Optical Unit 1 Optical Unit 2 Service Manual / Parts Guide 5 598.66 KB
AR-405 (serv.man18) AR405 Parts Guide-Copy Lamp Unit 2nd,3rd Mirror Holder Unit Service Manual / Parts Guide 3 223.15 KB
AR-405 (serv.man19) AR405 Parts Guide-Frame Section Rear Frame 1 Rear Frame 2 Photo Conductor Unit Service Manual / Parts Guide 7 1.21 MB
AR-405 (serv.man20) AR405 Parts Guide-Toner Hopper Unit Developer Unit Fusing Unit 1 Fusing Unit 2 Service Manual / Parts Guide 9 728 KB
AR-405 (serv.man21) AR405 Parts Guide-1 Bin Delivery Turnover Unit 1 1 Bin Delivery Turnover Unit 2 Vertical Transport Right Door Unit Vertical Transport Unit Service Manual / Parts Guide 7 802.99 KB
AR-405 (serv.man22) AR405 Parts Guide-PS Transport Unit Suction Unit Main Drive Unit 1 Main Drive Unit 2 Paper Feeding Drive Unit 1 Paper Feeding Drive Unit 2 Service Manual / Parts Guide 8 1.06 MB
AR-405 (serv.man23) AR405 Parts Guide-DV Drive Unit Fusing Drive Unit DV Guide Unit Multi Manual Paper Feeding Unit 1 Multi Manual Paper Feeding Unit 2 Service Manual / Parts Guide 6 541.32 KB
AR-405 (serv.man24) AR405 Parts Guide-Waste Toner Unit Tray Paper Feeding Unit Multi Manual Paper Feeding Tray Unit MC Unit TC Unit Tray Unit Service Manual / Parts Guide 7 779.02 KB
AR-405 (serv.man25) AR405 Parts Guide-Packing Material Accessories PCU PWB ICU PWB Operation Control PWB Operation PWB R Operation PWB L Inverter PWB AC PWB Service Manual / Parts Guide 9 247.51 KB
AR-405 (serv.man26) AR405 Parts Guide-Scanner Drive PWB ORS PD PWB DC Power Supply PWB.100v DC Power Supply PWB.200v Service Manual / Parts Guide 7 137.31 KB
AR-405 (serv.man27) AR405 Parts Guide-RADF Exteriors RADF Transport Belt Section RADF Paper Feeding Transport Section 1 Service Manual / Parts Guide 7 923.97 KB
AR-405 (serv.man28) AR405 Parts Guide-RADF Paper Feeding Transport Section2 RADF Reversion Transport Section Paper Feeding Tray Section RADF PBA-Control PWB Service Manual / Parts Guide 8 764.96 KB
AR-405 (serv.man29) AR405 Parts Guide-Index Service Manual / Parts Guide 18 287.39 KB
AR-405 (serv.man2) AR405 Specifications Service Manual / Specification 6 218.37 KB
AR-405 (serv.man41) Change of Fuser Cover Part Number. Service Manual / Technical Bulletin 1 25.47 KB
AR-405 (serv.man42) Improvement made to prevent fire hazard caused by imperfect contact on fixing junction PWB. Service Manual / Technical Bulletin 1 45.23 KB
AR-405 (serv.man43) Re issue bulletin regarding a parts change - mainly for the mirror mount fixing plate. Service Manual / Technical Bulletin 4 1.6 MB
AR-405 (serv.man44) Change to the paper feed roller material. Service Manual / Technical Bulletin 13 1.22 MB
AR-405 (serv.man45) IMPROVEMENT MADE TO PREVENT MALFUNCTION CAUSED BY IMPERFECT CONTACT ON FIXING JUNCTION PWB. Service Manual / Technical Bulletin 1 106.72 KB
AR-405 (serv.man46) Reduction of F2-00 error. (Toner supply error) Service Manual / Technical Bulletin 2 12.33 KB
AR-405 (serv.man47) New service part for repairing a broken ADU frame Service Manual / Technical Bulletin 2 239.04 KB
AR-405 (serv.man48) Paper feed drive unit part change Service Manual / Technical Bulletin 1 30.01 KB
AR-405 (serv.man49) Corrections carried out in the parts guide (DV unit toner hopper) Service Manual / Technical Bulletin 2 91.78 KB
AR-405 (serv.man50) HV protect sheet addition Service Manual / Technical Bulletin 1 36.21 KB
AR-405 (serv.man51) Corrections made to a jamming error caused by the ADU transfer clutch dragging or slipping Service Manual / Technical Bulletin 1 42.95 KB
AR-405 (serv.man52) Establishment of the paper feeding drive clutch with mylar shehed as a service part Service Manual / Technical Bulletin 1 30.63 KB
AR-405 (serv.man53) Parts change information Service Manual / Technical Bulletin 1 30.59 KB
AR-405 (serv.man54) Notice of jam codes Service Manual / Technical Bulletin 3 58.33 KB
AR-405 (serv.man55) Supply of silicon oil used for cleaning the SPF glass to be carried out as a service part Service Manual / Technical Bulletin 1 30.82 KB
AR-405 (serv.man56) Copy paper jams caused by grease entering the internal section of the paper feeding drive clutch and supply of Hanari grease as a service part Service Manual / Technical Bulletin 1 34.59 KB
AR-405 (serv.man57) Corrections carried out in the parts guide Service Manual / Technical Bulletin 1 30.08 KB
AR-405 (serv.man58) Change carried out in the material of the reversion gate Service Manual / Technical Bulletin 1 29.82 KB
AR-405 (serv.man59) Establishent of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Service Manual / Technical Bulletin 2 52.22 KB
AR-405 (serv.man60) Parts change information Service Manual / Technical Bulletin 4 140.64 KB
AR-405 (serv.man61) Correction carried out in the parts guide for the charger wire Service Manual / Technical Bulletin 1 19.22 KB
AR-405 (serv.man62) Part changes Service Manual / Technical Bulletin 1 33.26 KB
AR-405 (serv.man63) Improvement of paper jam udulation caused by hardening of the delivery roller Service Manual / Technical Bulletin 1 22.14 KB
AR-405 (serv.man64) Notice of jam cause codes Service Manual / Technical Bulletin 3 153.47 KB
AR-405 (serv.man65) Providing a caution label, as a service part, on adding toner Service Manual / Technical Bulletin 2 70.58 KB
AR-405 (serv.man66) Using the same hand-feed pick-up roller as the 550 paper-feeding unit Service Manual / Technical Bulletin 1 29.8 KB
AR-405 (serv.man67) Change of the cleaning blade Service Manual / Technical Bulletin 1 34.61 KB
AR-405 (serv.man68) Parts change information Service Manual / Technical Bulletin 1 30.89 KB
AR-405 (serv.man69) Parts change information Service Manual / Technical Bulletin 3 139.49 KB
AR-405 (serv.man70) Polygon motors for laser units. Service Manual / Technical Bulletin 1 20.68 KB
AR-405 (serv.man71) Change of pulley fixing double-thread screw and discontinued M4 tap. Service Manual / Technical Bulletin 1 85.91 KB
AR-405 (serv.man72) Change carried out in the hopper seal of the developing tank. Service Manual / Technical Bulletin 6 213.68 KB
AR-405 (serv.man73) Change of parts used in 550 paper feeding unit. Service Manual / Technical Bulletin 2 123.9 KB
AR-405 (serv.man74) Problem with main drive unit paper feed clutch. Service Manual / Technical Bulletin 3 1.18 MB
AR-405 (serv.man75) Addition of explanatory label for lever operation and change of suction lift shaft. Service Manual / Technical Bulletin 1 120.75 KB
AR-405 (serv.man76) Measure to alleviate problems of disengagement of the side plate in the machine cassette unit. Service Manual / Technical Bulletin 2 124.61 KB
AR-405 (serv.man77) ICU PWB part number change. Service Manual / Technical Bulletin 1 74.42 KB
AR-405 (serv.man78) Action to alleviate problems of static electricity through the use of a plastic bag for the machine. Service Manual / Technical Bulletin 1 72.63 KB
AR-405 (serv.man79) Abnormal noise from process unit. Service Manual / Technical Bulletin 1 60.53 KB
AR-405 (serv.man80) Part change information. Service Manual / Technical Bulletin 2 160 KB
AR-405 (serv.man81) Unification of 200V series DC power unit. (WHITE) Service Manual / Technical Bulletin 2 91.96 KB
AR-405 (serv.man82) Change of supplier for sintered bearings. (WHITE) Service Manual / Technical Bulletin 4 188.55 KB
AR-405 (serv.man83) Change of touch panel. (WHITE) Service Manual / Technical Bulletin 1 86.85 KB
AR-405 (serv.man84) Changes to the AR505 Service Manual and addition of jam cause codes. (WHITE) Service Manual / Technical Bulletin 5 323.55 KB
AR-405 (serv.man85) Change carried out in the original document detection photo sensor. (WHITE) Service Manual / Technical Bulletin 1 73.94 KB
AR-405 (serv.man86) Change carried out in the paper feeding drive frame and the transport clutch. (WHITE) Service Manual / Technical Bulletin 2 119.36 KB
AR-405 (serv.man87) Change carried out in the PS front roller bearing. (WHITE) Service Manual / Technical Bulletin 1 83.44 KB
AR-405 (serv.man88) Change carried out in the waste toner drive gear in the main drive unit. (WHITE) Service Manual / Technical Bulletin 1 83.58 KB
AR-405 (serv.man89) Measure to alleviate problems of snagging the copy keys on the operation panel. (YELLOW) Service Manual / Technical Bulletin 1 61.14 KB
AR-405 (serv.man90) Change carried out in the maker of the table glass used in the RADF. (WHITE) Service Manual / Technical Bulletin 2 116.81 KB
AR-405 (serv.man91) Action to alleviate problems of dislocation of the disfunction arm in the ADU unit. (WHITE) Service Manual / Technical Bulletin 1 83.85 KB
AR-405 (serv.man92) Change carried out in the location of production of the LSU unit. (WHITE) Service Manual / Technical Bulletin 1 88.01 KB
AR-405 (serv.man93) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 133.8 KB
AR-405 (serv.man94) Countermeasure against Z-folding and paper mis-feed. (WHITE) Service Manual / Technical Bulletin 4 552.17 KB
AR-405 (serv.man95) Change carried out in the attachment screws for the operation panel LCD. (WHITE) Service Manual / Technical Bulletin 1 136.4 KB
AR-405 (serv.man96) Measure to improve the performance of the copy lamp. (WHITE) Service Manual / Technical Bulletin 1 114.6 KB
AR-405 (serv.man97) Change carried out in the shape of the bushing and the attachment gear in the paper-feeding drive unit. (WHITE) Service Manual / Technical Bulletin 2 137.66 KB
AR-405 (serv.man98) Change in shape of the TC holder R. (WHITE) Service Manual / Technical Bulletin 1 121.34 KB
AR-405 (serv.man99) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 139.91 KB
AR-405 (serv.man100) Report of flash memory version method. (WHITE) Service Manual / Technical Bulletin 3 130.58 KB
AR-405 (serv.man101) Marks on the rear frame of copies, ghosting on the rear frame of copies. (WHITE) Service Manual / Technical Bulletin 1 89.71 KB
AR-405 (serv.man102) Fixing ARPB2 F9 00 error messages. (WHITE) Service Manual / Technical Bulletin 2 96.34 KB
AR-405 (serv.man103) Corrections to the Service Manual. (WHITE) Service Manual / Technical Bulletin 3 181.37 KB
AR-405 (serv.man104) Change carried out in the synchronous detection PWB in the LSU. (WHITE) Service Manual / Technical Bulletin 1 95.19 KB
AR-405 (serv.man105) 1.Change carried out in the stir plate of the developing tank unit. 2.Change carried out in the material used for the TX sheet in the toner hopper unit. (WHITE) Service Manual / Technical Bulletin 3 156.25 KB
AR-405 (serv.man106) Change Of Parts To Diminish The Noise From The Polygon Motor. (WHITE) Service Manual / Technical Bulletin 1 38.82 KB
AR-405 (serv.man107) 1.Change Carried Out In The Plastic Slider Washer In The ADU Unit. 2.Action To Alleviate Problems Of Static Electricity In The OP Control PWB Unit. (WHITE) Service Manual / Technical Bulletin 2 157.93 KB
AR-405 (serv.man108) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 2 127.96 KB
AR-405 (serv.man109) 1.Correction Of Screws In The Scanner Unit. 2.Addition Carried Out Of A Harness Protect Sheet S. (WHITE) Service Manual / Technical Bulletin 2 161.5 KB
AR-405 (serv.man110) ROM Version Upgrade (Control No.7). (WHITE) Service Manual / Technical Bulletin 1 58.4 KB
AR-405 (serv.man111) Length Change Of SP Tube. (WHITE) Service Manual / Technical Bulletin 1 63.22 KB
AR-405 (serv.man112) 1.Change Of The ICU PWB Unit At EFI's Request. 2.Change Of The Touch Panel Manufacturer. 3.Change Of The Heat-resistant Clamp Fixing Screws In The Fusing Unit. 4.Change Of The Action Time Changing The ICU PWB Memory To SDRAM. (WHITE) Service Manual / Technical Bulletin 3 87.22 KB
AR-405 (serv.man113) Extension Of The Rib On The Rail Section Of The 550-Tray Case. (WHITE) Service Manual / Technical Bulletin 2 90.29 KB
AR-405 (serv.man114) Corrections Carried Out In The Parts Guide. (WHITE) Service Manual / Technical Bulletin 7 292.04 KB
AR-405 (serv.man115) 1.Increase Of The DC Power Supply Capacity. 2.Change Of The Memory On the ICU PWB To SDRAM. 3.Change Of The Installation Procedure Manual And Addition Of Wire Saddle. (WHITE) Service Manual / Technical Bulletin 2 109.26 KB
AR-405 (serv.man116) 1.Satisfaction Of The Argentine Safety Standard. 2.Increase Of Strength Of The Boss On The Right End Of The RSPF Base. 3.Removal Of The RSPF Upper Guide Plate Holes And Addition Of The Delivery Paper Guide Positioner. (WHITE) Service Manual / Technical Bulletin 2 100.29 KB
AR-405 (serv.man117) 1.Points Of Caution To Be Observed During Maintenance Operations Of The Fusing Unit. 2.ROM Writer Functions For The ICU PWB. (WHITE) Service Manual / Technical Bulletin 2 77.3 KB
AR-405 (serv.man118) Change Carried Out In The Hard Disk. (WHITE) Service Manual / Technical Bulletin 2 116.42 KB
AR-405 (serv.man119) 1.Change Carried Out In The Main Harness. 2.Change Carried Out In The Spring Of The Multi Manual Unit. (WHITE) Service Manual / Technical Bulletin 2 78.44 KB
AR-405 (serv.man120) 1.Change Carried Out In The Bearings In The Paper Feeding Drive Unit. 2.Discontinuance Of The Manual Pressure Spring Attachment Plate. (WHITE) Service Manual / Technical Bulletin 2 79.01 KB
AR-405 (serv.man121) Change Carried Out In The Shape Of The AC Harness Cover. (WHITE) Service Manual / Technical Bulletin 2 76.14 KB
AR-405 (serv.man122) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 8 330.52 KB
AR-405 (serv.man123) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 6 133.49 KB
AR-405 (serv.man124) 1.Change To The Attachment Screws Of The Optical Reception PWB Holder. 2.Measure To Alleviate Problems Of Electrical Noise In The ICU PWB. (WHITE) Service Manual / Technical Bulletin 2 110.67 KB
AR-405 (serv.man125) 1.Parts Change To Incorporate Parts Manufactured By Sharp Into Assembled Units (Productivity Improvement). 2.Measure To Establish Uniformity Of The High Voltage PWB (To Improve Productivity). 3.Parts Change Carried Out In Accordance With A Change To In-house Production Of The LSU Unit. 4.Measure To Establish Uniformity Of The PCU PWB To Improve Productivity. 5.Measure To Alleviate Problems Of Scattering Of The Waste Toner. (WHITE) Service Manual / Technical Bulletin 1 69.79 KB
AR-405 (serv.man126) Change In The Magnetic Clutch Of The Paper Feeding Unit In The 500 Tray To Improve Productivity. (WHITE) Service Manual / Technical Bulletin 2 103.1 KB
AR-405 (serv.man127) 1.Change In The Height Of The ADU Opening And Closing PG Boss. 2.Change In The PG Quantity Of The Paper Feeding Desk. (WHITE) Service Manual / Technical Bulletin 4 164.31 KB
AR-405 (serv.man128) Correction Measure Carried Out To Allevaite Problems Of Diagonal Feeding Which Occurred During Copy Operations Using The ADF. (WHITE) Service Manual / Technical Bulletin 1 66.21 KB
AR-405 (serv.man129) Measure To Alleviate Problems Of Improperly Tightened Screws In The Paper Delivery Reversion Unit. (YELLOW) Service Manual / Technical Bulletin 1 59.72 KB
AR-405 (serv.man130) 1.Action Carried Out As A Measure To Improve The Precision Of The Diameter Of The PS Roller. 2.Addition Of An Edge Guide Sheet. 3.Addition Of A Caution Label Concerning The Laser In The LSU Unit. (WHITE) Service Manual / Technical Bulletin 3 84.29 KB
AR-405 (serv.man131) 1.Change Carried Out In The Assembly Contractor Of The Toner Hopper And Developing Unit. 2.Measure Carried Out To Protect The Main Developing Unit. 3.Measure To Improve The Alignment Performance Of The Waste Toner Transport Gear. 4.Measure To Diminish Abnormal Noise Which Occurs In The Paper Delivery Reversion No. 2 Bin Unit. (WHITE) Service Manual / Technical Bulletin 5 136.81 KB
AR-405 (serv.man132) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 6 107.72 KB
AR-405 (serv.man133) Fast Facts 96-Firmware upgrade for AR405 Service Manual / Technical Bulletin 1 6.51 KB
AR-405 (serv.man134) 1.Change In The Shape Of The Attachment Plate Of The AC PWB (To Improve Productivity). 2.In-house Production Of the Operation Manuals (To Improve Productivity). (WHITE) Service Manual / Technical Bulletin 2 45.13 KB
AR-405 (serv.man135) 1.Discontinuance Of The Plastic Sliders Used In The Developing Unit (To Improve Productivity). 2.Establishment Of Uniformity Of The Upper Cabinet Rear (To Improve Productivity). 3.Change In The Maker Of The Drive Unit Clutch (To Improve Productivity). 4.Discontinuance Of The Boss In The Fusing Unit (To Improve Productivity). (WHITE) Service Manual / Technical Bulletin 3 53.91 KB
AR-405 (serv.man136) AR405 335 285 280 and AR-DU1, Frame strengthening. Previously sent out as Fast Fact 94 Service Manual / Technical Bulletin 1 6.28 KB
AR-405 (serv.man36) ASPI Update and Check Utility Driver / Update 1.94 MB
AR-405 (serv.man37) Flash 5.1 Download Utility Driver / Update 16.94 KB
AR-405 (serv.man38) AR405 PCU Firmware 2.07 Driver / Update 796.07 KB
AR-405 (serv.man39) AR405 ICU Firmware 2.12 Driver / Update 979.15 KB
AR-405 (serv.man40) AR405 OPE Firmware 2.06 Driver / Update 1.27 MB
AR-405 Cougar Handy Guide (Updated March'02) Handy Guide 54 218.68 KB
AR-405 (serv.man33) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-405 (serv.man34) Cougar Firmware Revision Table FAQ 6 19.71 KB
AR-405 (serv.man35) AR280 285 335 405 Jam Map Listing FAQ 2 5.3 KB
AR-405 (serv.man137) MSDS F-00871 Regulatory Data 2 194.68 KB
AR-405 (serv.man138) MSDS F-00881 Regulatory Data 2 195.14 KB
AR-405 (serv.man139) Environmental Data Sheet Regulatory Data 1 5.76 KB
AR-405 (serv.man140) MSDS F-30881 Regulatory Data 2 178 KB
AR-405 (serv.man141) MSDS F-30871 Regulatory Data 2 180.8 KB

RANDOM: