DOWNLOAD Sharp AR-405 (serv.man31) Service Manual ↓ Size: 1.52 MB | Pages: 64 in PDF or view online for FREE

Model
AR-405 (serv.man31)
Pages
64
Size
1.52 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR405 Operation Manual-Section 2
File
ar-405-sm31.pdf
Date

Sharp AR-405 (serv.man31) User Manual / Operation Manual ▷ View online

3-7
CHAPTER
3
4
Select the desired erase mode.
Select “EDGE ERASE”, “CENTRE ERASE” or “EDGE+CENTRE
ERASE” on the touch panel. The selected erase mode will be
highlighted.
5
Adjust the amount of edge erase and/or centre erase if
needed.
The amount can be adjusted between 0 mm and 20 mm in 1 mm
increments (0" and 1" in 1/8" increments).
6
Press the upper “OK” key on the touch panel.
7
Make all other desired copier selections and press the
START (
) key.
If the document feeder is used, scanning of originals and copying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
8
Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the ERASE function, select the ERASE function again
and press the “CANCEL” key.
SPECIAL FUNCTIONS
  Erase
READY TO COPY. 
ERASE
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
CANCEL
1
OK
OK
(0~1)
inch
ERASE
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
CANCEL
10
OK
OK
(0~20)
mm
CANCEL
1
OK
OK
(0~1)
inch
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
ERASE
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
3-8
CHAPTER
3
SPECIAL FUNCTIONS
  Dual page copying
The DUAL PAGE COPY feature produces separate copies of two
documents placed side by side on the document glass. It is especially
useful when copying books and other bound documents.
This feature can be used in the one-sided to two-sided copying mode.
DUAL PAGE COPYING
1
Place the originals on the document glass with the
centre of the two pages aligned with the paper size index
 A4 (
 8
1
/
2
). Close the document feeder cover.
Set the page to be copied first on the left part of the document
glass.
2
Press the SPECIAL MODES key.
The SPECIAL MODES screen will appear.
3
Press the “DUAL PAGE COPY” key on the touch panel.
The “DUAL PAGE COPY” key will be highlighted.
A4 (8-1/2" x 11") sized copy paper will be automatically selected.
If A4 (8-1/2" x 11") copy paper is not loaded, copying can be
performed with the currently selected tray.
To leave a binding margin on the copy, select the MARGIN
SHIFT function. See page 3-4.  The MARGIN SHIFT feature
applies only to the left page on the document glass if “RIGHT” or
“LEFT” of MARGIN SHIFT has been selected.
To erase shadows caused by document binding, use the EDGE
ERASE feature. See page 3-6.
4
Press the “OK” key.
READY TO CO
READY TO COPY. 
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT
TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
A4
Paper size index
3-9
CHAPTER
3
SPECIAL FUNCTIONS
  Dual page copying
5
Ensure that the desired tray is selected.
6
Enter the desired number of copies.
7
Press the START (
) key.
If the SORT mode has been selected for copying multiple
originals, proceed to the next step. If not, copying will start.
8
Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
Copying will start at this time.
Up to 60 sheets of A3 (11" x 17") originals can be scanned.
To cancel the DUAL PAGE COPY function, press the “DUAL
PAGE COPY” key again on the SPECIAL MODES screen.
DUAL PAGE COPYING
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
EADY TO COPY. 
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
A4
1. A4
2. A3
11 17
ORIGINAL
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
A4
3-10
CHAPTER
3
The MULTI SHOT function is used to copy several originals, collectively in
a specified order, onto one sheet.
SPECIAL FUNCTIONS
  Multi shot
MULTI SHOT
1
Place the originals in the document feeder tray or  on the
document glass.
When using the document glass, place the originals one at a time
in the reverse order, starting with the last original first.
2
Press the “PAPER SELECT” key on the touch panel and
select the desired paper size.
3
Press the 2-SIDED COPY key and select a duplex mode
if desired. Press the “OK” key to close the duplex
selection window.
4
Press the SPECIAL MODES key.
The SPECIAL MODES screen will appear.
READY TO COPY. 
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2
1.
 A4
2. A3
AUTO
READY TO CO
Page of 64
Display

Click on the first or last page to see other AR-405 (serv.man31) service manuals if exist.