DOWNLOAD Sharp AR-405 (serv.man31) Service Manual ↓ Size: 1.52 MB | Pages: 64 in PDF or view online for FREE

Y

●

The copy ratio in the vertical (Y) direction will be highlighted.

●

To change the copy ratio in the horizontal direction again, press
the 

X

 key.

●

The message “

”

may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START (

)

key, a copy will be made.

●

If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratios.

●

If the document feeder is used, scanning of originals and copying
will start.

●

If the document glass is used in the SORT mode, proceed to the
next step.

●

Copying will start at this time.

●

Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.

●

To cancel this function, press the “CANCEL” key or the “XY
ZOOM” key again as in step 3.

XY zoom

 TO COPY. 

Y

100%

ZOOM

%

%

100

%

%

%

READY TO COPY. 

EXPOSURE

PAPER SELECT

COPY RATIO

2. A3

1

2

3

4

5

6

7

8

9

0

P

PROGRAM

AUDIT CLEAR

INT

CA

CLEAR ALL

START

READY TO COPY. 

X

ZOOM

50

70%

64%

50%

EXPOSURE

PAPER SELECT

%

%

100%

CANCEL

141%

200%

400%

READ-END

AUTO IMAGE

PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].

EXPOSURE

PAPER SELECT

COPY RATIO

  Margin shift

The MARGIN SHIFT feature, in its initial setting, automatically shifts the text
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left, upper or lower in
the manner described below in step 4.

●

The standard shift amount is 10 mm (1/2"), but can be changed from
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).

★ KEY OPERATOR          The initial shift setting can be changed from 0 mm

NOTE:
The front side and reverse side are referred to as “SIDE 1” and “SIDE 2”
respectively on the touch panel.

Expanded margin

Copy

Original

●

The SPECIAL MODES screen will appear.

READY TO COPY. 

SPECIAL MODES

MARGIN SHIFT

MULTI SHOT

PAMPHLET COPY

ERASE

COVERS

IMAGE EDIT

TEXT STAMP

TRANSPARENCY

INSERTS

DUAL PAGE

COPY

EXPOSURE

PAPER SELECT

COPY RATIO

Margin is expanded here.

Margin is expanded

 

here.

READY TO CO

(Initial setting:
copy image shifted to the right)

  Margin shift

●

 The setting screen for MARGIN SHIFT will appear.

●

Select “RIGHT”, “LEFT”, “DOWN” or “UP” on the touch panel.
The selected shift direction will be highlighted.

●

If the document feeder is used, scanning of originals and copying
will start.

●

If the document glass is used in the SORT mode, proceed to the
next step.

●

Copying will start at this time.

●

Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.

●

To cancel the MARGIN SHIFT function, select the MARGIN
SHIFT function again and press the “CANCEL” key.

READY TO COPY. 

MARGIN SHIFT

CANCEL

SIDE 1

SIDE 2

RIGHT

LEFT

(0~20)
mm

(0~20)
mm

DOWN

UP

MARGIN SHIFT

CANCEL

SIDE 1

RIGHT

LEFT

(0~20)
mm

DOWN

UP

SIDE 1

(0~20)
mm

RIGHT

LEFT

DOWN

UP

SIDE 2

CA

CLEAR ALL

START

READY TO COPY. 

SPECIAL MODES

MARGIN SHIFT

MULTI SHOT

PAMPHLET COPY

ERASE

COVERS

IMAGE EDIT

TEXT STAMP

TRANSPARENCY

INSERTS

DUAL PAGE

COPY

EXPOSURE

PAPER SELECT

COPY RATIO

READ-END

PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].

EXPOSURE

PAPER SELECT

COPY RATIO

This copier has an edge erase mode and a centre erase mode.

●

Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.

●

Centre erase can be used to eliminate the shadow produced by the
bindings of bound documents.

●

Edge + centre erase can be used to eliminate shadow lines around the
edges of copies and to eliminate the shadow at the centre of copies.

●

The standard erase width is 10 mm (1/2"), but can be changed from 0 mm
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).

★ KEY OPERATOR        The initial setting of the width for edge erase and centre

  Erase

A B

A B

A

A

A B

A B

Edge erase

Centre erase

●

The SPECIAL MODES screen will appear.

●

The setting screen for ERASE will appear.

READY TO COPY. 

ERASE

EDGE ERASE

CENTRE ERASE

EDGE+CENTRE

ERASE

CANCEL

(0~20)
mm

READY TO CO

READY TO COPY. 

SPECIAL MODES

MARGIN SHIFT

MULTI SHOT

PAMPHLET COPY

ERASE

COVERS

IMAGE EDIT

TEXT STAMP

TRANSPARENCY

INSERTS

DUAL PAGE

COPY

EXPOSURE

PAPER SELECT

COPY RATIO

Edge + Centre erase