DOWNLOAD Sharp AR-405 (serv.man123) Service Manual ↓ Size: 133.49 KB | Pages: 6 in PDF or view online for FREE

Model
AR-405 (serv.man123)
Pages
6
Size
133.49 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Report Of Flash Memory Version Method. (WHITE)
File
ar-405-sm123.pdf
Date

Sharp AR-405 (serv.man123) Service Manual / Technical Bulletin ▷ View online

AR280/285/335/250/286/336/405ICU PWB ROM writer function operatingprocedure
1. Personal computer operating environment
•
OS: Windows 95/98 (Desk-top/Note)
* If the version of the Windows 95 is OSR2 or earlier, download a patch from Microsoft's
home page, and update the ISO.VDX.
• SCSI host adapter supporting ASPI
•
This function is assured with the following SCSI host adapters:
PCI:
AHA-2940 made by Adaptec
AHA-2910B made by Adaptec
PCMCIA: APA-1460 made by Adaptec
CardBus: APA-1480 made by Adaptec
ISA:
AHA-1520B made by Adaptec
AHA-1510B made by Adaptec
•
Driver software:
Ver.4.57 or a higher version is required for the ASPI driver software. If the version is lower
than Ver.4.57, the newest SCSI driver software and the ASPI driver software should be
downloaded from the Adaptec Co. Web site (http://www.adaptec.com) and installed in the
PC.
•
SCSI cable
•
Utility Software used by the ROM writing function of the ICU PWB.
•
ICU Flash ROM PWB for writing new data.
2. Procedure
[1] Confirm whether the machine can start up using the Flash ROM which has been
installed in the machine.
[2] The machine is in the Sim26-44 mode.
In this Sim26-44, set the channel (A channel) where the SCSI cable will be connected to “1”
(SC PRINTER).
* If the ARPB2 printer kit has already been used, since the channel setting has already
been completed, the above operation is not necessary. That is, the channel where the
printer kit has already been connected automatically becomes a channel for the SCSI
cable.
* If the version of the ICU ROM installed in the AR280/285/335is 2.xx, setting the Sim26-
44 is not necessary.
[3] Turn off the power and remove the cabinet of the Copier.
•
Remove the rear cabinet, the flywheel, and the shield line guide.
•
Remove the glass holder right, the table glass, and the dark box cover.
•
Open the front cabinet , and remove the ROM cover from the frame cover A.
•
When rewrite the flash ROM, can be operate without flash ROM PWB on the OPE PWB
and PCU PWB.
*1) When the flash ROM is rewritten using the ROM writer function described above, it is
essential that the flash ROM (program) of the ICU PWB is loaded to ICU PWB socket-1.
The targeted ROM is loaded to socket-2.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
*2) If the ICU ROM installed in the ROM Writer is version 3.xx for the AR280/285/335 or
any version for the AR250/286/336/405,the OPE and PCU ROMs need not be installed on
the machine when the program data is written to the flash ROM, and the versions of the
OPE and PCU ROMs can be upgraded separately. If the ICU ROM installed in the ROM
Writer is version 2.xx for the AR280/285/335, the OPE and PCU ROMs should be installed
on the machine when the program data is written to the flash ROM. Therefore, be sure to
upgrade the ICU ROM version first, and then upgrade the versions of the OPE and PCU
ROMs using the upgraded ICU ROM.
[4] Using a SCSI cable, connect the PC and the SCSI connector (channel A) set in the Sim
26-44 above. (Cable length: Max. 1m)
Connector configurations corresponding to channel A are shown below.
[5] Install the flash ROM to be written to the Dimm socket (SOCKET-2)of the ICU PWB.
(a) OPE ROM: LH28F016SUT ´ 1
(b) PCU ROM: LH28F008SUT ´ 1
(c) ICU ROM: LH28F008SUT ´ 2 (2MB)
[6] Turn on the power of the Copier.
[7] Turn on the power of the personal computer.
[8] When the personal computer is started, the Copier is recognised as the SCSI unit by
the SCSI host adapter.
* If an “Unknown Device” message is displayed in Windows, click on [Cancel] and
proceed with the operation to its completion. (The computer has recognised the machine
as an unknown device.)
[9] Copy the flash ROM writing program and the data file to be written into the flash ROM to
the same directory.
•
Flash ROM writing program: FLASH4.EXE (Windows program)
•
ICU program:
ICUxxxx.MOT (xxxx = Version No.)
ICU file data:
ICUxxxx.FD
(xxxx = Version No.)
•
PCU program:
PCUxxxx.MOT (xxxx = Version No.)
PCU file data:
PCUxxxx.FD
(xxxx = Version No.)
•
OPE program:
OPExxxx.MOT (xxxx = Version No.)
OPE file data:
OPExxxx.FD
(xxxx = Version No.)
Please note that the ROM program data (xxx.MOT) and the file data (xxx.FD) provided for
FLASH2 cannot be used for FLASH4.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
[10]When FLASH4.EXE is executed the following display is shown.
[11]Select the type of the flash ROM to be written and click the Translate button.
Data transfer is started from the personal computer to the ICU PWB.
[12]After completionof data transfer, writing to the flash ROM is started in the ICU PWB.
[13]When writing to the flash ROM is normally completed,the following display is shown.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
[14]-A When there is only one flash ROM to be written.
•
Click “Exit” to end the writing program.
•
End the Windows, and turn off the personal computer.
•
Turn off the power of the machine.
•
Remove the flash ROM which has been written, and rewrite the version No.
[14]-B When there are two or more flash ROM's to be written.
(A) In the case of a desk -top computer
•
Turn off the power of the Copier.
•
Remove the flash ROM PWB which has been written, and rewrite the version No.
•
Install another flash ROM PWB to be written to the Dimm socket (SOCKET-2) of the
ICU PWB.
•
Turn on the power of the Copier. (Check that the power LED on the ICU PWB has
completely gone out.)
•
Return to [11].
(B) In the case of a notebook computer
•
Start the IC card utility of Windows95,execute the end command, and pull out the SCSI
card from the IC card slot.
•
Turn off the power of the Copier.
•
Remove the flash ROM PWB which has been written, and rewrite the version No.
•
Install another flash ROM PWB to be written to the Dimm socket (SOCKET-2) of the
ICU PWB.
•
Turn on the power of the machine.
•
Insert the SCSI card into the IC card slot.
•
Check that the computer recognizes the Copier (display “COUGAR”) through the SCSI
card.
•
Return to [11].
[15]After rewriting all necessary ROMs
(1) Install the flash ROM PWB of revised version into the socket.
(2) Fix the cabinet which was removed in procedure [1] to the original position.
* When the ICU flash ROM is rewritten, replace it with the original flash ROM PWB
which is inserted to the socket (SOCKET-1) for ICU PWB program.
(3) If the ARPB2 printer kit is not used, set the SCSI channel (which was used
during the ROM rewrite) to 0 for the Sim 26-44. (Leaving the SCSI channel
setting as is could cause a faulty connection with the printer.)
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Page of 6
Display

Sharp AR-405 (serv.man123) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-405 (serv.man123) Service Manual ↓ Size: 133.49 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-405 (serv.man123) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-405 (serv.man123) Copying Equipment. Information contained in Sharp AR-405 (serv.man123) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.