Sharp AR-337 (serv.man8) User Manual / Operation Manual ▷ View online
3-43
CHAPTER
3
9
Press the upper “OK” key.
10
Make all other desired copier selections and enter the
desired number of copies.
desired number of copies.
11
Press the START (
) key.
●
If the document feeder is used, copying will start after all originals
are scanned.
are scanned.
●
If the document glass is used, proceed to the next step.
12
Replace the finished original with the next original after
the START (
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
on the touch panel.
●
Copying will start at this time.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the PAGE NUMBER function, select the PAGE
NUMBER function again and press the “CANCEL” key.
NUMBER function again and press the “CANCEL” key.
EXT STAMP
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
OK
OK
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS
Text stamp
TEXT STAMP
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
3-44
CHAPTER
3
SPECIAL FUNCTIONS
Tandem copy
TANDEM COPY
1
Ensure that the two copiers are connected through the
tandem-connection cable and they have been turned
on.
tandem-connection cable and they have been turned
on.
2
On the copier that will be set as the main copier, place
the originals in the document feeder tray or on the
document glass.
the originals in the document feeder tray or on the
document glass.
3
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
4
Press the “TANDEM COPY” key on the touch panel.
●
The “TANDEM COPY” key will be highlighted.
If this copier is connected with another copier of the same model equipped
with the same options through the tandem-connection cable (AR-CA1),
copying with the two machines can be performed eventually making the
total copy time for multiple copies one-half of the case when using a single
copier.
with the same options through the tandem-connection cable (AR-CA1),
copying with the two machines can be performed eventually making the
total copy time for multiple copies one-half of the case when using a single
copier.
●
A dedicated tandem-connection cable AR-CA1 is required for tandem
copying.
copying.
●
The tandem copying can be used only in the sort mode or staple sort
mode. The group mode cannot be selected.
mode. The group mode cannot be selected.
●
The transparency inserts function cannot be used with this function
because the number of copies must be 1 when the transparency inserts
function is used.
because the number of copies must be 1 when the transparency inserts
function is used.
●
The TANDEM COPY key will only be displayed on the touch panel of the
machine set as the main copier, (an authorised Sharp Service Technician
will do the setting of the main and sub copiers at the time of installation).
When the tandem function is selected, (only available on the main
copier) the other will then become the sub copier.
machine set as the main copier, (an authorised Sharp Service Technician
will do the setting of the main and sub copiers at the time of installation).
When the tandem function is selected, (only available on the main
copier) the other will then become the sub copier.
The setting procedure is described below.
●
INTERRUPT will not function during tandem copying.
●
The tandem copying function is not available for the AR-287.
READY TO CO
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
TANDEM
COPY
ERASE
COVERS
IMAGE EDIT
TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
3-45
CHAPTER
3
SPECIAL FUNCTIONS
Tandem copy
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
5
Press the “OK” key.
6
Make all other desired copier settings and enter the
number of copies.
number of copies.
●
The functions selected on the main copier will be used by both copiers.
(1) The key operator programs of which settings at the main copier
are given priority (the settings at the sub copier are disregarded):
Exposure Adjustment, Toner Save Mode, Initial Margin Shift,
Erase Width Adjustment, Initial Status Setting, Staple Position
Setting, Date Format Setting, Date and Time Adjustment and
Disabling of Covers Mode.
Erase Width Adjustment, Initial Status Setting, Staple Position
Setting, Date Format Setting, Date and Time Adjustment and
Disabling of Covers Mode.
(2) The key operator programs for which the same settings
between the main and sub copiers are required:
Disabling of Duplex Copying and Disabling of Stapler.
(3) The key operator program that can only be set at the main copier:
Disabling of Auto Paper Selection.
(4) In case of the other key operator programs than mentioned
above, different settings on the main and sub copiers
respectively do not matter even when the tandem copying is
activated.
respectively do not matter even when the tandem copying is
activated.
7
Ensure that paper of the same size selected in the main
copier is installed in the sub copier.
copier is installed in the sub copier.
●
Paper of the same size and same orientation must be installed
in the two copiers. Even if the image of the original is rotated to
match the copy paper in the main copier, the orientation of the
copy paper in the sub copier must be the same as that in the
master copier.
in the two copiers. Even if the image of the original is rotated to
match the copy paper in the main copier, the orientation of the
copy paper in the sub copier must be the same as that in the
master copier.
8
On the main copier, press the START (
) key.
●
Images scanned by the main copier will be stored in both copiers.
Half the number of copies selected will be made simultaneously
on both copiers. When the number of copies selected is odd, one
more copy will be made on the main copier than the sub copier.
Half the number of copies selected will be made simultaneously
on both copiers. When the number of copies selected is odd, one
more copy will be made on the main copier than the sub copier.
●
If the message “
CHECK THE SUB MACHINE.
” appears on the
main machine, an error has occurred in the sub machine. Check
the message on the sub machine and clear the error.
the message on the sub machine and clear the error.
●
If the message “
THE SYSTEM IS NOT CONFIGURED TO
PERFORM TANDEM JOB. CODE: XX
” appears on the main
machine, refer to the tandem copy related descriptions in the
TROUBLESHOOTING (see page 5-13).
TROUBLESHOOTING (see page 5-13).
●
To cancel a copy run after starting, press the CLEAR ALL (
CA
)
key on the main copier.
●
To cancel the TANDEM copying, press the “TANDEM COPY”
key again on the SPECIAL MODES screen of the main copier.
key again on the SPECIAL MODES screen of the main copier.
TANDEM COPY
3-46
CHAPTER
3
SPECIAL FUNCTIONS
Setting review
The current settings of copier functions can be displayed on the touch
panel.
panel.
SETTING REVIEW
1
Press the REVIEW (
) key.
●
The REVIEW screen will appear.
The settings of the duplex mode (1-sided to 1-sided, etc.), sort/
group mode, and special functions will be displayed. The
exposure, paper size, and copy ratio which are displayed on the
basic screen will not be displayed on the REVIEW screen.
group mode, and special functions will be displayed. The
exposure, paper size, and copy ratio which are displayed on the
basic screen will not be displayed on the REVIEW screen.
2
To review all setting information, it may be necessary to
scroll between review screens. To scroll between
screens, use the
scroll between review screens. To scroll between
screens, use the
or
key.
3
To exit the review screen, press the “EXIT” key.
●
The basic screen will appear again.
Example
100%
COPY RATIO
IDED COPIES OF 1-SIDED
GINALS
PLE SORT
PLE SORT
HIFT :SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
1ST PAGE ONLY
OT :
TAMP :
1/2
ED COPIES OF 1-SIDED
NALS
EXIT
1/2
E SORT
FT :SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
:
MP
EXIT
1-SIDED COPIES OF 1-SIDED
ORIGINALS
STAPLE SORT
STAPLE SORT
MARGIN SHIFT :
REVIEW
SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
1ST PAGE ONLY
MULTI SHOT :
SELECT STAMP :
1/2
Click on the first or last page to see other AR-337 (serv.man8) service manuals if exist.