DOWNLOAD Sharp AR-286 (serv.man106) Service Manual ↓ Size: 107.72 KB | Pages: 6 in PDF or view online for FREE

Model
AR-286 (serv.man106)
Pages
6
Size
107.72 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Report Of Flash Memory Version Method. (WHITE)
File
ar-286-sm106.pdf
Date

Sharp AR-286 (serv.man106) Service Manual / Technical Bulletin ▷ View online

provided for FLASH2 cannot be used for FLASH4.
[10]When FLASH4.EXE is executed the following display is shown.
[11]Select the type of the flash ROM to be written and click the Translate button.
Data transfer is started from the personal computer to the ICU PWB.
[12]After completionof data transfer, writing to the flash ROM is started in the ICU PWB.
[13]When writing to the flash ROM is normally completed, the following display is
shown.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
[14]-A When there is only one flash ROM to be written.
• Click “Exit” to end the writing program.
• End the Windows, and turn off the personal computer.
• Turn off the power of the machine.
• Remove the flash ROM which has been written, and rewrite the version No.
[14]-B When there are two or more flash ROM's to be written.
(A) In the case of a desk -top computer
• Turn off the power of the Copier.
• Remove the flash ROM PWB which has been written, and rewrite the version No.
• Install another flash ROM PWB to be written to the Dimm socket (SOCKET-2) of
the ICU PWB.
• Turn on the power of the Copier. (Check that the power LED on the ICU PWB has
completely gone out.)
• Return to [11].
(B) In the case of a notebook computer
• Start the IC card utility of Windows95, execute the end command, and pull out the
SCSI card from the IC card slot.
• Turn off the power of the Copier.
• Remove the flash ROM PWB which has been written, and rewrite the version No.
• Install another flash ROM PWB to be written to the Dimm socket (SOCKET-2)of the
ICU PWB.
• Turn on the power of the machine.
• Insert the SCSI card into the IC card slot.
• Check that the computer recognizes the Copier (display “COUGAR”) through the
SCSI card.
• Return to [11].
[15]After rewriting all necessary ROMs
(1) Install the flash ROM PWB of revised version into the socket.
(2) Fix the cabinet which was removed in procedure [1] to the original position.
* When the ICU flash ROM is rewritten, replace it with the original flash ROM PWB
which is inserted to the socket (SOCKET-1) for ICU PWB program.
(3) If the ARPB2 printer kit is not used, set the SCSI channel (which was used
during the ROM rewrite) to 0 for the Sim 26-44. (Leaving the SCSI channel
setting as is could cause a faulty connection with the printer.)
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Message display
Contents
Causes and countermeasure
Failed to initialize ASPI manager
The initialization of the ASPI manager
has failed.
The ASPI manager has not been
installed properly.
No valid firmware installed.
No effective ROM file exists.
The type of the ROM file does not
match the type of the Flash ROM
inserted in the socket.
Invalid firmware is installed.
The checksum described in the FD file
does not match the checksum contained
in the MOT file.
Check the checksums in both FD and
MOT files.
Translation of firmware has
incompleted.
Communication error:
A problem occurred while transmitting
the ROM data.
Check the SCSI connection.
No valid copier connected.
Communication error:
A problem occurred while confirming the
connection with the Copier.
The PC does not recognize the Copier
as a SCSI device. Check the Sim26-44
settings. Check the connection channel.
Check the installation of the SCSI driver
and ASPI driver on the PC.
Failed to allocate memory.
Insufficient memory was allocated to run
the FLASH4.EXE file.
Memory of the PC was insufficient.
Firmware update has incompleted.
The rewrite to the flash memory has
failed.
If you tried rewriting flash ROM data two
or more times by clicking on “Transmit”
and both attempts failed, there is a
possibility that the FLASH ROM was not
installed properly or it may be defective.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Error messages
Message display
Contents
Causes and countermeasure
Failed to initialize ASPI manager
The initialization of the ASPI manager
has failed.
The ASPI manager has not been
installed properly.
No valid firmware installed.
No effective ROM file exists.
The type of the ROM file does not
match the type of the Flash ROM
inserted in the socket.
Invalid firmware is installed.
The checksum described in the FD file
does not match the checksum contained
in the MOT file.
Check the checksums in both FD and
MOT files.
Translation of firmware has
incompleted.
Communication error:
A problem occurred while transmitting
the ROM data.
Check the SCSI connection.
No valid copier connected.
Communication error:
A problem occurred while confirming the
connection with the Copier.
The PC does not recognize the Copier
as a SCSI device. Check the Sim26-44
settings. Check the connection channel.
Check the installation of the SCSI driver
and ASPI driver on the PC.
Failed to allocate memory.
Insufficient memory was allocated to run
the FLASH4.EXE file.
Memory of the PC was insufficient.
Firmware update has incompleted.
The rewrite to the flash memory has
failed.
If you tried rewriting flash ROM data two
or more times by clicking on “Transmit”
and both attempts failed, there is a
possibility that the FLASH ROM was not
installed properly or it may be defective.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Error messages
Page of 6
Display

Sharp AR-286 (serv.man106) Service Manual / Technical Bulletin ▷ Download