Sharp AR-285 (serv.man35) User Manual / Operation Manual ▷ View online
4-8
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for an optional
finisher (AR-FN1).
toner, toner collecting container, and staple cartridges for an optional
finisher (AR-FN1).
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
Photoconductive drum
The AR-280/AR-285/AR-335 Copiers have advanced process control
technology which improves copy quality uniformity. This feature
stabilizes copy quality throughout the life of the photoconductive
drum by automatically compensating for the changes in drum
characteristics due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to a
sensor that detects the reflectance characteristics of the drum.
technology which improves copy quality uniformity. This feature
stabilizes copy quality throughout the life of the photoconductive
drum by automatically compensating for the changes in drum
characteristics due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to a
sensor that detects the reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1
Store the supplies in a location that is:
●
clean and dry,
●
at a stable temperature,
●
not exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
●
Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.
curl or become damp, resulting in paper misfeeds.
5-1
CHAPTER
5
Page
●
MISFEED REMOVAL
.......................................
5-2
●
MAINTENANCE REQUIRED
.................................
5-12
●
TROUBLESHOOTING
......................................
5-13
CHAPTER 5
COPIER TROUBLE?
This chapter describes how to remove misfed
originals and paper and other common trouble
remedies.
originals and paper and other common trouble
remedies.
5-2
CHAPTER
5
( P. 5-2, 5-3)
( P. 5-4)
( P. 5-4)
( P. 5-6)
( P. 5-7)
( P. 5-9)
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message “
The message “
A MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
FOR RECOVERY
INSTRUCTIONS.
” will appear with a display of paper
misfeed locations. Press the INFORMATION (
) key
for more detailed information as necessary.
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
First confirm the misfeed locations.
For misfeeds in optional equipment, see their respective
sections. (pages 7-14, 7-22, and 7-26)
For misfeeds in optional equipment, see their respective
sections. (pages 7-14, 7-22, and 7-26)
COPIER TROUBLE?
Misfeed removal
Misfeed in the SPF (AR-280)
When the SPF misfeeds an original sheet, the copier will stop and the
misfeed message will appear.
misfeed message will appear.
An original misfeed may occur at location (A).
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
A
5-3
CHAPTER
5
(A) Open the document feeder cover and remove the original.
●
Rotate the roller in the direction indicated by the arrow to remove
the misfed original.
the misfed original.
NOTE:
A message may appear indicating the number of originals which
must be returned to the document feeder tray. Return the originals
and press the START (
A message may appear indicating the number of originals which
must be returned to the document feeder tray. Return the originals
and press the START (
) key to resume copying.
Misfeed in the RADF (AR-285 and AR-335)
When the RADF misfeeds an original sheet, the copier will stop and
the misfeed message will appear.
the misfeed message will appear.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
(A) Open the feeding roller cover and pull the original gently
to the right and out from the document feeder tray.
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
the misfeed display.
(B) Open the exit roller cover and gently pull the original
out.
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
the misfeed display.
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
A
B
C
Feeding roller cover
Exit roller cover
Roller
Click on the first or last page to see other AR-285 (serv.man35) service manuals if exist.